Static encap routes don't have an MPLS label. Also, use %u instead of
%d to print the label.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These commands were causing bgpd to crash if a static VPN route was
configured.
While here, fix a bug in bgp_static_add() and bgp_static_delete().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If you specified A.B.C.D, the code would still try to
read A.B.C.D/M and not find it and pass in a NULL pointer
which crashed the code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Fix a segfault when the "show bgp large-community" command is given
without any optional large communities;
* Fix parsing of optional large communities. Without this fix a
"Large-community malformed" error is shown even for valid large
communities.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Code inspection showed a bunch more spots where
we were assigning the safi inside of a if statement
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When outputting routes associated with a 'struct bgp'
do not force the safi to bee SAFI_EVPN and cause output
to be hosed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The original code on shutdown assumed a 'forced' mode
if there was no process_main_queue. This construct
was violated by commit 2e02b9b2d1
due to not fully understanding the shutdown process.
If we are shutting down, don't store work to do later,
just gracefully don't do it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The buffer needs to be set to length 0 if nothing is written into
it, otherwise bgpd will log uninitialized memory, disclosing information
and possibly leading to a crash.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
As the prefix call function for mac handling has prefix_ prepended
before, the change must be propagated to all locations where those
functions are called.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN code adaptation to replace old mac string internal utility with the
new one available in lib folder.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Transmission and Reception routines have a part of code that is
conditionnally compiled to the usage of HAVE_EVPN. Also, each time a
subfield of prefix evpn is reached, like in configuration also, then a
conditionnaly compilation with HAVE_EVPN is used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit fixes the nexthop display behaviour when an evpn entry is
matched. The commit handles both cases where IPv4 or IPv6 nexthop is
detected.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In case a manual set of MPLS, ENCAP, or EVPN entry is set, then the
nexthop attribute localted in attr->extra structure must be changed too.
In standard cases, where IPv4 IGP nexthop address is picked up, the same
address ie chosen.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A new vty command available under evpn address family. This command
takes following format:
(af-evpn)# [no] network <A.B.C.D/M|X:X::X:X/M> rd ASN:nn_or_IP-address:nn ethtag WORD
label WORD esi WORD gwip A.B.C.D routermac WORD
[route-map WORD]
Among new parameters, ethtag stands for the ethernet tag indentifier.
ESI stands for the ethernet segment identifier, and must be entered in
following format: 00:11:22:33:44:55:66:77:88:99.
gwip stands for the gateway IP address contained in RT5 message. A
check is done on that value since if gwip is ipv4, then ip prefix must
be ipv4. The same for ipv6.
RouterMAc is the gateway mac address sent as extended community
attribute.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
L2VPN route prefix are composed of ethtag, mac address and ip address.
vty command "show bgp l2vpn rd <>" show macip prefix in the following
template: [ethtag][macaddress/len][ipaddress/len]
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
e
This patch introduces show show bgp evpn commands to dump
NLRI entries configured or received on BGP, related to EVPN
New command introduced is the following:
show [ip] bgp l2vpn evpn [all | rd <rd name> ] [overlay]
Like for MPLS, similar set of commands is added for EVPN:
show [ip] bgp l2vpn evpn [all|rd <RDNAME>]
show [ip] bgp l2vpn evpn all neighbor <NEIGHBOR> routes
show [ip] bgp l2vpn evpn all neighbor <NEIGHBOR> advertised-routes
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
For each received routermac extended community, the mac address is
copied into routermac extended community context. For each emission,
a check is done against routermac extended community, if L2VPN is
enabled. If enabled, the extended community is appended.
Signed-off-by: Philippe Gubiert <philippe.guibert@6wind.com>
This field can be either IPv4 or IPv6 address and is filled in in
bgp_static configuration structure.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As per draft-ietf-idr-tunnel-encaps-02, section 3.2.1, BGP Encap
attribute supports vxlan tunnel type. A new tunnel attribute has been
appended to subtlv list, describing the vxlan network identifier to
be used for the routing information of the BGP update message.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The commit introduces the changes to be done to carry route type 5 EVPN
information in bgp extra attribute information. The commit also handles
the update processing for route type 5 information, including ESI,
gatewayIP and label information.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces code to receive a NLRI message with route type
5, as defined in draft-ietf-bess-evpn-prefix-advertisement-02. It
It increases the number of parameters to extract from the NLRI and
to store into bgp extra information structure. Those parameters are
the ESI (ethernet segment identifier), the gateway IP Address (which
acts like nexthop attribute but is contained inside the NLRI itself)
and the ethernet tag identifier ( that acts for the VXLan Identifier)
This patch updates bgp_update() and bgp_withdraw() api, and then does the
necessary adapations for rfapi.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
To handle BGP NLRI EVPN messages, bgp is modified to handle AFI_L2VPN
and SAFI_EVPN values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
