Insist on the fact that zclient neighbor state flags are
mapped over netlink state flags. List all the defines
currently known on kernel, and create a netlink API to
convert netlink values to zclient values. The function is
simplified as it is a 1-1 match.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
FRRouting operator can install seg6 route via ZAPI,
But linux kernel operator also can install seg6 route
via Netlink directry (i.e. iproute2)
This commit make zebra to parse non-frr seg6 route
configuration via netlink and audit Zebra's RIB.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
With this patch, zclient can intall seg6 rotues when
they set properties "nh_seg6_segs" on struct nexthop
and set ZEBRA_FLAG_SEG6_ROUTE on zapi_route's flag.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
FRRouting operator can install seg6local route via ZAPI,
But linux kernel operator also can install seg6local route
via Netlink directry (i.e. iproute2)
This commit make zebra to parse non-frr seg6local
route configuration via netlink and audit Zebra's RIB.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
With this patch, zclient can intall seg6local rotues whem
they set properties nh_seg6local_{action,ctx} on struct nexthop
and set ZEBRA_FLAG_SEG6LOCAL_ROUTE on zapi_route's flag.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
In order to parse the netlink message into the
`struct rtattr *tb[size]` it is assumed that the buffer is
memset to 0 before the parsing. As such if you attempt
to read a value that was not returned in the message
you will not crash when you test for it.
The code has places were we memset it and places where we don't.
This *will* lead to crashes when the kernel changes. In
our parsing routines let's have them memset instead of having
to remember to do it pre pass in to the parser.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
do not add a new route type, and consider 0 as a value meaning
that zebra should be the owner.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zapi_nbr structure is renamed to zapi_neigh_ip.
Initially used to set a neighbor ip entry for gre interfaces, this
structure is used to get events from the zebra layer to nhrp layer.
The ndm state has been added, as it is needed on both sides.
The zebra dplane layer is slightly modified.
Also, to clarify what ZEBRA_NEIGH_ADD/DEL means, a rename is done:
it is called now ZEBRA_NEIGH_IP_ADD/DEL, and it signified that this
zapi interface permits to set link operations by associating ip
addresses to link addresses.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Instead of directly configuring the neighbor table after read from zapi
interface, a zebra dplane context is prepared to host the interface and
the family where the neighbor table is updated. Also, some other fields
are hosted: app_probes, ucast_probes, and mcast_probes. More information
on those fields can be found on ip-ntable configuration.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN neighbor operations were already done in the zebra dataplane
framework. Now that NHRP is able to use zebra to perform neighbor IP
operations (by programming link IP operations), handle this operation
under dataplane framework:
- assign two new operations NEIGH_IP_INSTALL and NEIGH_IP_DELETE; this
is reserved for GRE like interfaces:
example: ip neigh add A.B.C.D lladdr E.F.G.H
- use 'struct ipaddr' to store and encode the link ip address
- reuse dplane_neigh_info, and create an union with mac address
- reuse the protocol type and use it for neighbor operations; this
permits to store the daemon originating this neighbor operation.
a new route type is created: ZEBRA_ROUTE_NEIGH.
- the netlink level functions will handle a pointer, and a type; the
type indicates the family of the pointer: AF_INET or AF_INET6 if the
link type is an ip address, mac address otherwise.
- to keep backward compatibility with old queries, as no extension was
done, an option NEIGH_NO_EXTENSION has been put in place
- also, 2 new state flags are used: NUD_PERMANENT and NUD_FAILED.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
neighbor table api in zebra is added. a netlink api is created for that.
the handler is called from the api defined in the previous commit.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When netlink_neigh_update() is called, the link registration was
failing, due to bad request length.
Also, the query was failing if NDA_DST was an ipv6 address.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zebra implements zebra api for configuring link layer information. that
can be an arp entry (for ipv4) or ipv6 neighbor discovery entry. This
can also be an ipv4/ipv6 entry associated to an underlay ipv4 address,
as it is used in gre point to multipoint interfaces.
this api will also be used as monitoring. an hash list is instantiated
into zebra (this is the vrf bitmap). each client interested in those entries
in a specific vrf, will listen for following messages: entries added, removed,
or who-has messages.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
This is causing problems with VM move i.e. transition from remote
neigh to local neigh. This transition involves changing the NUD_STATE
NUD_NOARP to NUD_STALE. And the weak override flag prevents changing
the state from connected (REACHABLE, NOARP, PERMANENT) to STALE.
PS: Weak-override was originally used to prevent race conditions where
FRR can end up making a REACHABLE neigh STALE. We may need to revisit
and address that case at a later point.
Ticket: CM-30273
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When looking up the conversion from kernel protocol to
internal protocol family make sure we use the correct
AF_INET( what the kernel uses ) instead of AFI_IP (which
is what FRR uses ).
Routes from OSPF will show up from the kernel as OSPF6 instead of
OSPF. Which will cause mayhem
Ticket: CM-33306
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
When dplane_fpm_nl is used the "Please add this protocol(n) to proper
rt_netlink.c handling" debug message is emitted for any route of type
kernel or connected.
This severely reduces performance of dplane_fpm_nl when large numbers
of these routes are present in the RIB.
The messages are not observed when using the original fpm module since
this uses a custom function, netlink_proto_from_route_type().
zebra2proto() now returns RTPROT_KERNEL for ZEBRA_ROUTE_CONNECT and
ZEBRA_ROUTE_KERNEL. This should only impact dplane_fpm_nl's use of
the common netlink routines since these routes generally ignored via
checking of RSYSTEM_ROUTE().
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
If a netlink/dp notification is rxed for a neigh without the peer-sync
flag FRR re-installs the entry with the right flags. This change is
needed to handle cases where the dataplane and FRR may fall out of
sync because of neigh learning on the network ports (i.e. via
the VxLAN).
Ticket: CM-30693
The problem was found during VM mobility "torture" tests where 100s
of extended VM moves were done.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
With EVPN-MH, Type-2 routes are also used for MAC-IP syncing between
ES peers so a change was done to only treat REACHABLE local neigh
entries as local-active and advertise them as Type-2 routes i.e. STALE
neigh entries are no longer advertised as Type-2s.
This however exposed some unexpected problems with MLAG where a
secondary reboot followed by a primary reboot left a lot of neighs
in STALE state (on the primary) resulting in them not being
advertised. And remote routed traffic to those hosts being
blackholed in a sym-IRB setup.
This commit is a workaround to fix the regression (it doesn't fix
the underlying problems with entries not becoming REACHABLE; which
maybe a day-1 problem). The workaround is to continue advertising
STALE neighbors if EVPN-MH is not enabled.
Ticket: CM-30303
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Use the new nested NDA_FDB_EXT_ATTRS attribute to control per-fdb
notifications.
PS: The attributes where updated as a part of the kernel upstreaming
hence the change.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a local ES flaps there are two modes in which the local
MACs are failed over -
1. Fast failover - A backup NHG (ES-peer group) is programmed in the
dataplane per-access port. When a local ES flaps the MAC entries
are left unaltered i.e. pointing to the down access port. And the
dataplane redirects traffic destined to the oper-down access port
via the backup NHG.
2. Slow failover - This mode needs to be turned on to allow dataplanes
not capable of re-directing traffic. In this mode local MAC entries
on a down local ES are re-programmed to point to the ES-peers'
NHG. And vice-versa i.e. when the ES comes up the MAC entries
are re-programmed with the access port as dest.
Fast failover is on by default. Slow failover can be enabled via the
following config -
evpn mh redirect-off
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
NHG and DST (VTEP-IP) are mutually exclusive attributes. If DST is
present the kernel ignores NHG.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a command that allows FRR to know it's being used with
an underlying asic offload, from the linux kernel perspective.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel is getting RTM_F_OFFLOAD_FAILED for kernel routes
that have failed to offload. Write the code
to receive these notifications from the linux kernel
and store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
