Adding the "clear ipv6 ospf6 command" . It resets
the ospfv3 datastructures and clears the database
as well as route tables. It resets the neighborship
by restarting the interface state machine.
If the user wants to change the router-id, this
command updates the router-id to the latest static
router-id and starts the neighbor formation with
the new router-id.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Some unprotected debugs need to have macro protection,
Split these into the existing covering macro section to remove
a check per-packet from the main path.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Coverity flagged the possibility of an overflow in the latency
calculation, ensure that 64 bit integers are used in the
calculation to avoid this error.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
When OSPFv3 router is configured in both default and non-default VRFs,
every packet destined to a non-default VRF is read twice. This makes it
impossible to establish neighborship because every DbDesc packet is
treated as duplicated and we end up infinitely exchanging DbDescs.
We should drop packets received in the default VRF if an interface we
received it on is bound to another VRF.
Same thing was done for OSPFv2 in 555691e.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem Statement:
==================
Max aged LSAs are not getting deleted from DB when there are multiple
neighbors in a LAN.
Root Cause Analysis:
====================
When the LSA is added to the neighbor's retransmit list, the LSA retrans count
is incremented but it is not checked if the LSA is already present in the
retransmit list leading to the count being incremented multiple times
untill the ack is not received and when the ack is received the count is
decremented once and hence the count never becomes 0 and
it remains in the DB forever.
Fix:
====================
Do not increment the retrans count multiple times if the LSA is already
present in the retransmit list of the neighbor. Also do not add the LSA
in the retransmit List if already present.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Problem Statement:
=================
When show ipv6 ospf6 neighbor is executed each neighbor gets
displayed twice.
frr# show ipv6 ospf6 neighbor
Neighbor ID Pri DeadTime State/IfState Duration I/F[State]
1.1.1.1 1 00:00:39 Full/DR 00:00:10 ens192[BDR]
1.1.1.1 1 00:00:39 Full/DR 00:00:10 ens192[BDR]
RCA:
====
Since ospf6_interface gets added twice to if_list we see multiple
display output.
Fix:
====
add ospf6_interface to if_list only when newly area gets attached
to the interface. If its already added no need to add it again.
Risk:
=====
Low
Tests Executed:
===============
Have tested the defect scenario.
frr# show ipv6 ospf6 neighbor
Neighbor ID Pri DeadTime State/IfState Duration I/F[State]
1.1.1.1 1 00:00:35 Full/DR 00:36:04 ens192[BDR]
frr#
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
ospf6_asbr_redistribute_unset must not be called if the redistribution
is not yet configured, because it decrements redistribution counter and
makes it negative in this case.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
During the database description exchange process, the slave
releases the last dbdesc packet after router_dead_interval.
This was not implemented in the code.
I have written the function ospf6_neighbor_last_dbdesc_release,
which releases the last dbdesc packet after router_dead_interval.
This change was required as per the conformance test 13.11:
In state Full reception of a Database Description packet from
the master after this interval (RouterDeadInterval) will
generate a SeqNumberMismatch neighbor event.
Associated Parameters
ICMPv6 Packet Listen Time
ICMPv6 Packet Tolerance Factor
ICMPv6 Packet Tolerance Time
OSPFV3 DUT Interface Transmit Delay
OSPF Reset Adjacencies Timeout
Test Actions
1.
2. 3.
ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0, with DUT as slave.
ANVL: Wait (for <RouterDeadInterval> seconds).
ANVL: Send <OSPF-DD> packet from neighbor Rtr-0-A to DIface-0 con- taining:
• •
I-bit field not set M-bit field not set
MS-bit field set
DD sequence number same as the one last sent by ANVL.
. ANVL: Listen (for upto 2 * <RxmtInterval> seconds) on DIface-0.
5. DUT: Trigger the event SeqNumberMismatch and set the neighbor state for neighbor Rtr-0-A to ExStart.
6. DUT: Send <OSPF-DD> packet.
7. ANVL: Verify that the received <OSPF-DD> packet contains:
• I-bit field set
• M-bit field set
• MS-bit field set.
Test Reference
• RFC 5340, s4.2.1.2 p19 Sending Database Description Packets
RFC 2328, s10.8 p104 Sending Database Description Packets.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
In RFC 2328 seqnumber 0x80000000 is reserved and not used. If an LSA
is received with seqnumber the LSA is now dropped and a debug error log
is printed.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
For redistribute commands if route map is set, then route takes it's metric
values from the route map. But in the case that routemap is set but the
metric for the route map is not, then the route metric is set to type-1.
Check if the metric is set for the routemap. If not then set it as per
redistributed default values (type 2)
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
The default values will be set at the time of ospf6_redist_add
similar to ospfv2. Hence the default values will change as well.
Default metric type = E2
Default metic value = 20
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
allow amount of work done by read and write threads in a single
invocation to be tuned to between 1 and 100 packets (default 20)
Signed-off-by: Pat Ruddy <pat@voltanet.io>
On transmit and receive calculate the time since the last hello was seen
and log a warning if it is late by more than the hello period.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
queue outgoing lsupdate messages to the interface tx FIFO and schedule
the ospf_write task to deal with them.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
enqueue outgoing dbdesc messages to the end of the tx FIFO and
schedule the ospf6_write task to deal with them.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add per interface fifo and per instance write list as a precursor
to implementing fairer sharing of the ospf6 oscket resources.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
To ensure we read all the datagrams availabe from a socket when the
read task is scheduled, make the read helper return and error or
continue enum and loop unitl an error is received.
This requires the read from the socket to be non blocking
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Take the contents of ospf6_receive and split the funtionality that
deals with a single packet receipt and place it in a separate helper
function.
This is the first step in a refactor process to allow the ospf6_read
task to read until failure.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
The logging in ospf6 is very verbose. If you turn on logging on a scaled
system you get too many logs. The problem is that there are some errors
that occur that are hidden behind the debug flags, and to see these errors
we currently need to turn on the debug logging. This change converts these
error logs to warnings and removes the debug flags.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Changed LSA checksum JSON output variable name from "checkSum" to
"checksum" to maintain consistency.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Some wires got crossed during a couple merges using/changing
this function.
Update it to its new name.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
The ospf6_is_router_abr is checking to see if ospfv3 is an abr router
and also setting values. Let's rename it too `ospf6_check_and_set_router_abr`
to more accurately reflect what it is doing.
Additionally fix coverity #1505176 where we were not checking the return
value of ospf6_is_router_abr like we did every other time. In this
case we don't care about the return value so indicate that we do not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There exists a code path where ospf6 could be NULL and passing
to a function where it would always be derefed is a bad idea.
Put some small code in place to prevent this and allow this to be debuged
if it happens in the future.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently the interface area is configured from the router node using
"interface IFNAME area ID" command. There are multiple problems with
this command:
- it is not in line with all other interface-related commands - other
parameters are configured from the interface node using "ipv6 ospf6"
prefix
- it is not in line with OSPFv2 - area is configured from the interface
node using "ip ospf area" command
- most importantly, it doesn't work correctly when the interface is in
a different VRF - instead of configuring the interface, it creates a
new fake interface and configuring it instead
To fix all the problems, this commit adds a new command to the interface
configuration node - "ipv6 ospf6 area ID". The purpose of the command is
completely the same, but it works correctly in a multi-VRF environment.
The old command is preserved for the backward compatibility, but the
warning is added that it is deprecated because it doesn't work correctly
with VRFs.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The %p printf format specifier does already print the pointer address
with a leading "0x" prefix (indicating a hexadecimal number). There's
no need to add that prefix manually.
While here, replace explicit function names in log messages by
__func__.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Patch provided by Soman K.S. with small alterations.
Signed-off-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The following is implemented.
1. Configuring area as NSSA.
2. Generating Type 7 LSA.
3. Conversion of Type 7 to Type 5 ( Default Behavior).
4. NSSA ABR selection.
Reviewed-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Co-authored-by: Kaushik <kaushiknath.null@gmail.com>
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Kaushik <kaushiknath.null@gmail.com>
Ensure that if allocated route is not added to a table then it is
deleted to avoid leaking memory.
Add a new memory type for route table so that ospf6 routes can be
distinguished in the show memory output in isolation.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
So far, "set tag" was 99% implemented in ospf6d, but registration of the
hook functions was missing, causing "set tag" actions in route maps to be
ignored in ospf6d.
This commit adds the missing hook registration.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Fix the following issues:
- if "send" is combined with "recv-hdr", only "send" is shown
- if "recv" is combined with "send-hdr", only "recv" is shown
- if both "send-hdr" and "recv-hdr" are enabled, "; header only" is shown
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The message is always shown in the config, because IS_OSPF6_DEBUG_MESSAGE
works incorrectly when negated because of missing outer brackets.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
OSPF6 instance may not exist when processing interface state change.
Do not execute processing steps that require an instance if an area is
not configured for an interface.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Don't `memcpy` a `struct prefix` the memory size varies depending on the
original intended type. In this case the original type was (casted away)
`struct prefix_ipv6` and we tried to copy `struct prefix` which is
bigger.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When the ospf6 instance in unknown VRF is deleted, the redistribution
config is not freed, because it is not registered in zebra. We should
always free the config regardless of zebra registration status.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If the default route redistribution is configured in OSPF6 router before
the VRF is created, then this is not currently registered in zebra after
the VRF creation.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The code had no limits on addresses configured on an interface running
ospf6d. The code would crash when more than 100 addresses were added.
This change limits the number of interface address to 100 if mtu is set
to the default value. If the mtu is set to a jumbo packet size or larger
we will support 200 interface addresses.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Fixes OSPFv3-26.13 ANVL RFC conformance bug #8576 by improving the bugfix
for #7030 from 4c63a76a. That commit changed handling of received old
non-MAXAGE LSAs with a MAXAGE counterpart in the LSDB from "add all LSAs to
LSDB and flood non-self-originated ones" to "add & flood only
non-self-originated LSAs and ignore self-originated LSAs". The new behaviour
is similar but adds sending a MAXAGE LS Update for received self-originated
LSAs to remove the old LSAs from the network, resulting in "add & flood
non-self-originated LSAs, don't add but send MAXAGE LS Update for
self-originated LSAs". The missing MAXAGE LS Update is what OSPFv3-26.13
ANVL complained about.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
When an "export-filter" or "filter-list out" was configured on an area the
filter was not applied to existing database. The user would either have
to restart the neighboring router in the other area or issue a "clear ipv6
ospf6 interface" to cause the neighbor router to resend it's LSAs. The
new filter would then be applied to these LSAs and permit or deny summary
LSAs from being added/removed from the database. The code now applies the
filters to the existing database without user needing to take any action
to clear ospfv3 adjacencies.
The second part of the problem was if a rule changed the updated filter was
not applied. The code has been modifed to now process the rule update and
reapply the filter.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
As per the ospfv3 conformance test 24.3
SETUP: Configure DIface-0 with priority set to <hprty>.
ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0.
DUT: Exchange all the <OSPF-DD> packets, during adjacency establish- ment.
ANVL: Verify that the received <OSPF-DD> packets contain: • one header of Link-LSA, originated by DUT.
ANVL: Send <OSPF-LSR> packet from neighbor Rtr-0-A to DIface-0 con- taining:
• One Request Tuple for Link-LSA originated by DUT.
ANVL: Listen (for upto 2 * <RxmtInterval> seconds) on DIface-0. DUT: Send <OSPF-LSU> packet.
ANVL: Verify that the received <OSPF-LSU> packet contains:
• •
one Link-LSA, originated by DUT, contains: Rtr Pri field set to <hprty>.
----------
When interface priority is changed Link LSAs should be tranmitted
with the priority set.
When the link priorty chanages, the drbdr algorithm is called, which
can change the state of the interface. But if the state does not
changes then LINK LSAs are not transmitted.
This PR fixes this issue. If the state is changed, then LINK LSAs
will anyways be tranmitted. But in case the state is not changed,
even in that case Link LSAs are tranmitted.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
This change allows the user to only log the message header and not
include all the LSAs in each packet. In a large setup printing out
all the LSAs in each packet can make the system very hard to debug.
When the user finds an issue with the adjacency not coming up or in a
specific packet type they can turn on a full dump of the message.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
The output of "show ipv6 ospf6 route json" was not in the same
format as "show ip ospf route json". Currently ipv6 and ipv4 route
tables as well as ospfv2 have prefix as the key, but the same
is not true for ospfv3.
The structure of the json objects needs to be changed.
Currently the structure present is
frr(config-ospf6)# do show ipv6 ospf6 route json
{
"routes":[
{
"destination":"66:ff::\/64",
"isBestRoute":true,
"destinationType":"N",
"pathType":"IA",
"duration":"00:00:06",
"nextHops":[
{
"nextHop":"::",
"interfaceName":"ens256"
}
]
}
]
}
It is changed to:
frr(config-ospf6)# do show ipv6 ospf6 route json
{
"routes":{
"12::2\/128":{
"isBestRoute":true,
"destinationType":"N",
"pathType":"IA",
"duration":"00:01:22",
"nextHops":[
{
"nextHop":"::",
"interfaceName":"ens192"
}
]
}
}
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
`config.h` has all the defines from autoconf, which may include things
that switch behavior of other included headers (e.g. _GNU_SOURCE
enabling prototypes for additional functions.)
So, the first include in any `.c` file must be either `config.h` (with
the appropriate guard) or `zebra.h` (which includes `config.h` first
thing.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
`CFLAGS` is a "user variable", not intended to be controlled by
configure itself. Let's put all the "important" stuff in AC_CFLAGS and
only leave debug/optimization controls in CFLAGS.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... by referencing all autogenerated headers relative to the root
directory. (90% of the changes here is `version.h`.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Issue: When maximum-path is configured in ospf6 view, the
function ospf6_restart_spf deletes the external table as well
which is not required since that stores the redistribute routes.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
When oi->area == NULL, it tries to print the
interface's area name, but no area is present.
Print the area name from the command argument instead.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
this command summarises the ospf6 instances along with the router-id and
the vrf_id associated.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
This commit introduces the implementation for the north-bound
callbacks for the ospf6d-specific route-map match and set clauses.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Signed-off-by: Sarita Patra <saritap@vmware.com>
When the ospf6 daemon goes down, it originates MAX_AGE
LSAs for all the self-originated LSAs so that it gets
flushed from the neighbor's database. But the link-LSAs
are not getting MAX_AGE.
Set the self-originated link-LSAs age to MAX_AGE and
flood it
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Same as other commits -- convert most DEFINE_MTYPE into the _STATIC
variant, and move the remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
The point of the `-std=gnu99` was to override a `-std=c99` that may be
coming in from net-snmp. However, we want C11, not C99.
Signed-off-by: David Lamparter <equinox@diac24.net>
When removing an interface from an existing area,
the warning message we get is not correct
interface r1-r2-eth0
ipv6 address 2013:12::1/64
ipv6 ospf6 dead-interval 4
ipv6 ospf6 hello-interval 1
!
interface dummy
ipv6 ospf6 dead-interval 4
ipv6 ospf6 hello-interval 1
ipv6 ospf6 network point-to-point
!
router ospf6
ospf6 router-id 1.1.1.1
interface r1-r2-eth0 area 0.0.0.0
!
r1(config-if)# router ospf6
r1(config-ospf6)# no interface dummy area 0.0.0.0
No such Area-ID: 0.0.0.0 <--- area 0.0.0.0 exists
This is fixing the error message
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
This bug was first reported in PR#7717. When removing an interface
from the area, the interface prefix is still shown
r1# sh ipv6 ospf6 interface prefix
*N IA 2013:12::/64 ::1 r1-r2-eth0 00:00:12
r1# conf t
r1(config)# router ospf6
r1(config-ospf6)# no interface r1-r2-eth0 area 0.0.0.0
r1(config-ospf6)# exit
r1# sh ipv6 ospf6 interface prefix
*N IA 2013:12::/64 ::1 r1-r2-eth0 00:00:22
This fix will check if the interface is disabled so the
prefix is not shown
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
In OSPFv3 when removing the interface from an area, all ospf6
interface commands are lost, so when changing the area you need
to reconfigure all ospf6 interface commands again
r1# sh run
interface r1-r2-eth0
ipv6 address 2013:12::1/64
ipv6 ospf6 dead-interval 4
ipv6 ospf6 hello-interval 1
ipv6 ospf6 network point-to-point
!
router ospf6
ospf6 router-id 1.1.1.1
interface r1-r2-eth0 area 0.0.0.0
!
r1# conf t
r1(config)# router ospf6
r1(config-ospf6)# no interface r1-r2-eth0 area 0.0.0.0
r1(config-ospf6)# exit
r1# sh run
interface r1-r2-eth0
ipv6 address 2013:12::1/64
! <----- missing all ipv6 ospf6 commands
router ospf6
ospf6 router-id 1.1.1.1
!
This is because the interface is being deleted instead of disabled
(see PR#7717) I believe the interface should be left as disabled
(not deleted) when removing the interface from the area
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
When there are too many LSA updates to be sent in a packet the code needs to
correctly clear the locks that are taken while walking the lists and then wait
for the appropriate timer to expire to continue walking the list. The routine
that was being called would not properly remove all the locks that needed to be
cleared, and would also try to incorrectly delete the lsa/route. The code now
clears the locks and leaves the lsa on the list. When the timers fire again
the code continues walking the list to send the rest of the lsas to the
neighbor.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
If area is a normal area and has adjacencies up and then the user changes
the area to a stub area, the code was leaving existing AS-External LSAs in
the database and was sending AS-External LSAs into the stub area causing
the adjacency to stay in Ex-Start. With this change we now cleanup the
AS-External LSAs that existed when area was not a stub and do not advertise
AS-External LSAs into the stub area.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
ospf6 keeps a flag to remember whether the cost for an interface
was manually added via config or computed automatically, but if
the configured value matches the auto-computed one we were not
setting this flag, meaning that the config would not show up in
the config.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
When an unknown LSA is in the database and the user issues the
"show ipv6 ospf6 database" command there is a crash. The code currently
doesn't properly handle display of unknown LSAs.
Signed-off-by: Lynne Morrison <lynne@voltaio.net>
Add more details to these logs to help make it easier to determine why
ospf6 adjacency is not coming up. Also make these logs show up without
having to turn on debug logging, again making it easier to debug the
misconfiguration.
Signed-off-by: Lynne Morrison <lynne@voltaio.net>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
Issue: When a path in the inter area ecmp route is deleted, the route is removed
Fix: The fix is to remove the specific path from the inter area route using
ospf6_abr_old_route_remove() when abr route entry is not found.
In the function ospf6_abr_old_route_remove() the path to be removed needs
to match adv router and link state ID
Fixed memory leak in ospf6_intra_prefix_update_route_origin() caused by
route node lock not getting released.
Signed-off-by: kssoman <somanks@gmail.com>
