There are places where we use route-maps using duplicated attributes and
neither intern nor flush them after the usage. If a route-map has set
rules for aspath/communities, they will be allocated and never freed.
We should always flush unneeded duplicated attributes.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
EVPN paths are maintained in per-ES list for efficient updates
(es→macip_global_path_list, es→macip_evi_path_list). VNI is also maintained
in path_extra for easy lookups. This (path_extra) VNI (which is always 0 for
global paths) was being displayed against the path and was mis-interpreted
as the BD.
To avoid that confusion I have removed the display.
Ticket: #2732605
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
This is to avoid breaking changes between existing deployments of
extended community for bandwidth encoding. By default FRR uses uint32
to encode bandwidth, which is not as the draft requires (IEEE floating-point).
This switch enables the required encoding per-peer.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9# show ip bgp large-community-list
(1-500) large-community-list number
LCOMMUNITY_LIST_NAME large-community-list name
large-testas
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9# show ip bgp community-list ?
(1-500) community-list number
COMMUNITY_LIST_NAME community-list name
testas
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When bgp receives the admin distance from a redistribution statement
let's store that distance for later usage.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When an EVPN prefix flaps too quickly such that the new advertisement
is received prior to the full processing of the prior withdraw, we may
get into a state where the route doesn't get imported properly into
MAC or IP VRFs. Ensure that we do the route import in such cases.
Suggested-by: Sri Mohana Singamsetty <msingamsetty@vmware.com>
Suggested-by: Ameya Dharkar <adharkar@vmware.com>
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
Add a bit of code to allow for auto-completion of the community
alias command when attempting to use it for show commands.
example:
eva(config)# bgp community alias 11:22 FOO
eva(config)# end
eva# show bgp ipv4 uni alias
ALIAS_NAME BGP community alias
FOO
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Some BGP updates received by BGP invite local router to
install a route through itself. The system will not do it, and
the route should be considered as not valid at the earliest.
This case is detected on the zebra, and this detection prevents
from trying to install this route to the local system. However,
the nexthop tracking mechanism is called, and acts as if the route
was valid, which is not the case.
By detecting in BGP that use case, we avoid installing the invalid
routes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Force the processing of existing network configurations when VRF is
created, otherwise will be skipped in bgp_static_update().
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Add a terse option to show bgp summary to shorten output.
Do not show the following information about the BGP
instances: the number of RIB entries, the table version and the used memory.
The "terse" option can be used in combination with the "remote-as", "neighbor",
"failed" and "established" filters, and with the "wide" option as well.
Before patch:
ubuntu# show bgp summary remote-as 123456
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
% No matching neighbor
Total number of neighbors 5
After patch:
ubuntu# show bgp summary remote-as 123456 terse
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 1
% No matching neighbor
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
While installing this route in the EVPN table, make sure all the conditions
mentioned in the draft
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement-11 are
met.
Draft mentions following conditions:
- ESI and gateway IP cannot be both nonzero at the same time.
- ESI, gateway IP, RMAC and VNI label all cannot be 0 at the same time.
If the received EVPN RT-5 route does not meet these conditions, the route is
treated as withdraw.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Gateway IP overlay index is generated for EVPN RT-5 when following CLI is
configured.
router bgp 100 vrf vrf-blue
address-family l2vpn evpn
advertise ipv4 unicast gateway-ip
advertise ipv6 unicast gateway-ip
BGP nexthop of the VRF IP/IPv6 route is set as the gateway IP of the
corresponding EVPN RT-5
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP configuration changes that imply recomputing the BGP route table
(e.g. modifying route-maps, setting bgp graceful-shutdown) might be a
long time process depending on the size of the BGP table and the
route-map numbers and complexity. For example, setups with full
Internet routes take something like one minute to reprocess all the
prefixes when graceful-shutdown is configured. During this time, a
"show bgp commands" request on vtysh results in blocking the shell until
the soft reconfigure table task is over.
This patch splits bgp_soft_reconfig_table task into thread jobs of 25K
prefixes.
Some tests on a full Internet route setup show that after reconfiguring
route-maps or graceful-shutdown, vtysh is not stucked anymore. We are
now able to request commands like "show bgp summary" after 1 or 2
seconds instead of 30 to 60s.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
