When we are debugging add a bit of extra information
so we can know what we are redistributing to our peers
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When changing from "ip import-table 10 route-map rdn" to "ip
import-table 10" without a route-map, routes would be deleted
and not reinstalled. This fix resolves that problem.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Realized (with coverity's help) the fix had a mistake by pasting in
the wrong route entry to unset the selected flag. This fix takes
care of that mistake.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem was due to in certain route replace circumstances,
we would mark the old route_entry as removed to delete it but
would leave the selected flag set. When the rn was pulled off the
work queue for process, we would find both the new re and old re
(being deleted) with the selected flag set and would assert.
In this change, when we decide to delete the old re, we also mark
it as no longer selected.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When we receive an arbitrary table over the netlink bus
save it for later perusal and sweep any routes that
we may have created from an earlier run.
The current redistribute code is limited to
ZEBRA_KERNEL_TABLE_MAX. I left this alone for the
moment because I believe it needs to be converted
to a RB tree instead of a flat array. Which is more
work for the future. Additionally this proposed
change might necessitate some cli changes or rethinks.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Group send and receive functions together, change handlers to take a
message instead of looking at ->ibuf and ->obuf, allow zebra to read
multiple packets off the wire at a time.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
A lot of the handler functions that are called directly from the ZAPI
input processing code take different argument sets where they don't need
to. These functions are called from only one place and all have the same
fundamental information available to them to do their work. There is no
need to specialize what information is passed to them; it is cleaner and
easier to understand when they all accept the same base set of
information and extract what they need inline.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Also modify `struct route_entry` to use nexthop_groups.
Move ALL_NEXTHOPS loop to nexthop_group.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code modifies zebra to use the STREAM_GET functionality.
This will allow zebra to continue functioning in the case of
bad input data from higher level protocols instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported when a table entry originated by rdnbrd was moved from one
interface to another on the same switch. Both would be deleted, leaving
no imported entry in the table. Modified zebra_add_import_table_entry to
used rib_add_multipath as well as correct the call to delete a duplicate
entry to include the nexthop associated with the route_entry.
Ticket: CM-18154
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed By: CCR-6731
Testing Done: Manual testing successful, deb given to submitter, bgp-smoke
had no new failures
This is a continuation of 915902cb82. Basically the netlink
read of messages up from the kernel is now noticing the proper
owner of the route. As such when rib_delete was being called
as part of the upcall from the kernel we were not noticing that
we were the originator and not diss-allowing the rib_delete
from happening. This restores this behavior that we were getting
pre-915902cb82cfd
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RNODE_FOREACH_RE... function calls were not properly being
indented when we switched over to the new format. Let's fix
this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Now that all rib functions are afi/safi independent,
allow import-table to work with v6 routes too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are 3 different implementations of is_prefix.
Standardize on is_prefix_default and fix it's implementation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Various socket close issues
2) Ensure afi passed is usable
3) Fix some reads beyond buffer and reads after free
4) Ensure some failure modes are handled properly
5) Memory Leak(s) fix
6) There is no 6.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When the linux kernel adds/deletes routes, the
metric is important, but our routing protocols
add/delete in a slightly different manner,
so allow kernel metrics to match so that our
rib matches the kernel's fib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Whenever you did "redistribute" zebra would kick this off for ipv4 and
ipv6. No real issue other than this is sub-optimal
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem reported by a customer with prefix imported by rdnbrd not being
successfully installed in the quagga rib. Determined that this was due
to VRR resolving the same arp entry, causing two entries to be installed
in table 10. When these were imported into the quagga rib, they came in
as two different rib entries from the same table/instance, which is not
permitted and caused them to be deleted.
Added logic to zebra_add_import_table_entry to do the same actions as
rib_add and delete the older rib entry if a new rib entry is received
which matches.
Manual testing successful and automated tests for redistribute neighbor
have the same passes and failures as the base.
Ticket: CM-15926
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by:
Check and read the IPv6 source prefix on ZAPI messages, and pass it down
to the RIB functions (which do nothing with it yet.) Since the RIB
functions now all have a new extra argument, this also updates the
kernel route read functions to supply NULL.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There's no need to duplicate the 'vrf_id' and 'name' fields from the 'vrf'
structure into the 'zebra_vrf' structure. Instead of that, add a back
pointer in 'zebra_vrf' that should point to the associated 'vrf' structure.
Additionally, modify the vrf callbacks to pass the whole vrf structure
as a parameter. This allow us to make further simplifications in the code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Change redist_check_instance() to return a pointer instead of returning 1
on success. This way this function can be reused in redist_del_instance()
instead of duplicating the same logic there.
Also, remove unnecessary call to redist_check_instance() in
zebra_redistribute_delete().
While here, remove unnecessary cast from void* in redist_add_instance().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
