Fixes the following bug:
% ip route add 50.0.0.0/8 nexthop via 10.0.1.2 nexthop via 10.0.2.2
% ip route replace 50.0.0.0/8 nexthop via 10.0.1.3 nexthop via 10.0.2.3
% ip route replace 50.0.0.0/8 nexthop via 10.0.1.4 nexthop via 10.0.2.4
%
% vtysh -c "show ip route"
[snip]
K * 50.0.0.0/8 [0/0] via 10.0.1.4, rt1-eth1, 00:00:00
* via 10.0.2.4, rt1-eth2, 00:00:00
K * 50.0.0.0/8 [0/0] via 10.0.1.3, rt1-eth1, 00:00:10
* via 10.0.2.3, rt1-eth2, 00:00:10
K>* 50.0.0.0/8 [0/0] via 10.0.1.2, rt1-eth1, 00:00:24
* via 10.0.2.2, rt1-eth2, 00:00:24
Commit a3d18ce6 fixed a similar problem for single-path routes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Commit f19435a8 fixed rib_add() but didn't fix rib_add_multipath().
While here, remove the unnecessary 'same->table == re->table' check as
it always evaluate to true.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There exists situations where it is possible to have duplicate
nexthops passed from a higher level protocol into zebra.
This code notices this duplication of nexthops and marks
the duplicates as DUPLICATE so we don't attempt to install
it into the kernel.
This is important on *BSD as I understand it because passing
duplicate nexthops will cause the route to be rejected.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Reuse route_distance() on rib_add_multipath() and on rib_add();
* Set the admin distance of LDP and BGP MPLS LSPs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Set the default admin distance for some route types
more appropriately. The route_distance function
would return 0 for array items not configured, which
is not the right thing to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When we get a route install for a route that needs to be recursively
resolved allow the blackhole to be considered and used if it is
available.
This allows bgp to install a route that will be blackholed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We should only be operating RIB_UPDATE_IF_CHANGE on
types that zebra has control of. We assume that
the calling routing protocol is going to take care
of their own route changes based upon the interface
state change.
Also try to re-organize the code a tiny bit to allow
it to fit better within a tabed world.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to retrieve the zvrf *unless* we are doing
debugs. So move the retrieval under the debug statement.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With unnumbered interfaces on Linux we have the same IP address configured
on several different interfaces and hence multiple connected routes for
the same prefix.
With that said, add an exception in rib_add() to allow zebra to keep
track of all connected routes. We don't need to worry about the bugs
reported in a3d18ce because connected routes are always added from the
connected_up() function, and connected_update() already takes care of
handling duplicate addresses per interface.
Fixes#1112.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
With the change to make zebra pass routes to the kernel
with the 'correct' proto name, it caused zebra to
not properly recognize them on startup again
the next time such that the route would not
be deleted.
Modify rt_netlink.c to notice that we have a
self originated route and to properly mark
the type of route it was.
Modify rib_table_sweep to mark the nexthops
as active so that when we go to delete the
self originated routes it would properly
delete from the kernel.
Fixes: #1061
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Link-local routes are unique in the sense that they all have the same
prefix but have different nexthops (local interfaces). Add an exception
in rib_add() to allows us to keep track of all of them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fixes the following bugs:
1)
% ip -6 route add 5000::/64 via 3000::2
% ip -6 route replace 5000::/64 via 3000::2
% ip -6 route replace 5000::/64 via 3000::2
% ip -6 route replace 5000::/64 via 3000::2
% ip -6 route replace 5000::/64 via 3000::2
%
% vtysh -c "show ipv6 route"
[snip]
K * 5000::/64 [0/1024] via 3000::2, rt1-eth0
K * 5000::/64 [0/1024] via 3000::2, rt1-eth0
K * 5000::/64 [0/1024] via 3000::2, rt1-eth0
K * 5000::/64 [0/1024] via 3000::2, rt1-eth0
K>* 5000::/64 [0/1024] via 3000::2, rt1-eth0
2)
% ip -6 route add 7000::/64 via 3000::2
% ip -6 route replace 7000::/64 via 3000::3
% ip -6 ro | grep 7000
7000::/64 via 3000::3 dev rt1-eth0 metric 1024 pref medium
%
% vtysh -c "show ipv6 route"
[snip]
K * 7000::/64 [0/1024] via 3000::3, rt1-eth0
K>* 7000::/64 [0/1024] via 3000::2, rt1-eth0
NOTE: the check for ROUTE_ENTRY_REMOVED was redundant as it was already
performed at the beginning of the loop.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reference counter was introduced in 2001, apparently to solve a
problem with connected routes being added/removed multiple times. The RIB
code changed a lot since then, and giving the current callers of rib_add()
and rib_delete() it's safe to assume that we don't need this anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
blackhole support was horribly broken. cleanup by removing blackhole
stuff from ZEBRA_FLAG_*
introduces support for "prohibit" routes (Linux/netlink only)
also clean up blackhole options on "ip route" vty commands.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1) Various socket close issues
2) Ensure afi passed is usable
3) Fix some reads beyond buffer and reads after free
4) Ensure some failure modes are handled properly
5) Memory Leak(s) fix
6) There is no 6.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Change all callers of IPV4_ADDR_SAME() to pass a pointer to a struct in_addr
Use assignment and comparison instead of memcpy() and memcmp(). Avoids function
calls. Faster.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
Convert the work queue implementation to not use the generic linked list
to mantain the item list and use instead a simple queue from queue.h that
does not allocate memory for each node.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
When the linux kernel adds/deletes routes, the
metric is important, but our routing protocols
add/delete in a slightly different manner,
so allow kernel metrics to match so that our
rib matches the kernel's fib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Kernel does not send the best route after adding or deleting routes, if
we treat routes for an existing prefix as implicit withdraw the zebra RIB
goes out of sync with FIB and can announce wrong route to protocols.
host:~# vtysh -c 'show ip route'
S>* 0.0.0.0/0 [0/0] via 192.168.1.1, eth0
C>* 192.168.1.0/24 is directly connected, eth0
host:~# ip route add 192.0.2.0/24 via 192.168.1.101 metric 100
host:~# vtysh -c 'show ip route'
S>* 0.0.0.0/0 [0/0] via 192.168.1.1, eth0
K>* 192.0.2.0/24 via 192.168.1.101, eth0
C>* 192.168.1.0/24 is directly connected, eth0
host:~# ip route add 192.0.2.0/24 via 192.168.1.102 metric 50
host:~# vtysh -c 'show ip route'
S>* 0.0.0.0/0 [0/0] via 192.168.1.1, eth0
K>* 192.0.2.0/24 via 192.168.1.102, eth0
C>* 192.168.1.0/24 is directly connected, eth0
host:~# ip route del 192.0.2.0/24 via 192.168.1.102 metric 50
host:~# vtysh -c 'show ip route'
S>* 0.0.0.0/0 [0/0] via 192.168.1.1, eth0
C>* 192.168.1.0/24 is directly connected, eth0
host:~# ip route show 192.0.2.0/24
192.0.2.0/24 via 10.10.1.101 dev eth0 metric 100
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
Some routing protocols advertise route MTU (e.g. NHRP), with this patch
installed routes in the kernel have the advertised MTU.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Switch the RB tree implementation completely to the new dlg@'s version
that uses pre-declared functions instead of macros for tree functions.
Original e-mail/diff:
https://marc.info/?l=openbsd-tech&m=147087487111068&w=2
Pros:
* Reduces the amount of code that the usage of those macros generate
* Allows the compiler to do a better compile-time check job
* Might have better i-cache utilization since the tree code is shared
Con:
* dlg@ benchmarks shows it has 'very slightly slower' insertions
* imported RB_* code must adapt the following calls:
RB_INIT(), RB_GENERATE(), RB_ROOT(), RB_EMPTY(), make compare
functions use 'const' (if not already) and maybe others.
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Support install of labeled-unicast routes by a client. This would be
BGP, in order to install routes corresponding to AFI/SAFI 1/4 (IPv4)
or 2/4 (IPv6). Convert labeled-unicast routes into label forwarding
entries (i.e., transit LSPs) when there is a static label binding.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
... no need to have struct zlog generally-exposed.
A few files get to include log_int.h because they use zlog/vzlog.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This provides DMVPN support and integrates to strongSwan. Please read
README.nhrpd and README.kernel for more details.
[DL: cherry-picked from dafa05e65fe4b3b3ed5525443f554215ba14f42c]
[DL: merge partially resolved, this commit will not build.]
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This commit is also taking into account changes related to srcdes
feature introduction in zebra folder.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ticket: CM-12262
Reviewed By: CCR-5065
Testing Done: Manual
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The original goal of the zebra change was to force all:
NEXTHOP_TYPE_IPV4 -> NEXTHOP_TYPE_IPV4_IFINDEX
NEXTHOP_TYPE_IPV6 -> NEXTHOP_TYPE_IPV6_IFINDEX
This causes issues in routes being installed into the kernel
backing this out until I can get time to fully understand
what is going wrong.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We had a large block of #if 0 code. Since it's
been that way for like 8 months now, lets go ahead
and just remove it.
Additionally the rib_delete function was returning
a return code that was summarily ignored. Let's
clean up the expectation of returning anything.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Check and read the IPv6 source prefix on ZAPI messages, and pass it down
to the RIB functions (which do nothing with it yet.) Since the RIB
functions now all have a new extra argument, this also updates the
kernel route read functions to supply NULL.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There is a scenario where a RIB entry is unlinked and freed during RIB
processing. However, the walk of the entries is not being performed in
a safe manner. Fix the code to do this correctly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-13393
Reviewed By: Trivial
Testing Done: Basic manual test
It looks like 'nexthop_fib_num' has been lingering around since 2003
without any use. Remove it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
On *BSD, we update a route in the FIB by removing the old one and then
installing the new version.
With that said, on kernel_route_rib() we need to provide a pointer to
both the old version and the new version of the route.
We were, however, passing a pointer to the new version to both the
'old' and 'new' parameters. This is not a problem on Linux, which uses
NLM_F_REPLACE to update routes, but it breaks route updates on *BSD
because the 'old' parameter points to a route that is not installed in
the kernel. The kernel_route_rib() function then fails to uninstall the
supposedly 'old' route and can fail to install the new version as well if
the kernel doesn't support ECMP (e.g. FreeBSD with default configuration).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This contains bgp memory leak fixes as well as cleanups to VRF/namespace
handling and has been run through extended testing in Cumulus' testbed:
Tested-by: Donald Sharp <sharpd@cumulusnetworks.com>
Try to free all memory explicitly on exit. This should help to detect
new memory leaks in the future with tools like valgrind.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There's no need to duplicate the 'vrf_id' and 'name' fields from the 'vrf'
structure into the 'zebra_vrf' structure. Instead of that, add a back
pointer in 'zebra_vrf' that should point to the associated 'vrf' structure.
Additionally, modify the vrf callbacks to pass the whole vrf structure
as a parameter. This allow us to make further simplifications in the code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since VRFs can be searched by vrf_id or name, make this explicit in the
helper functions.
s/vrf_lookup/vrf_lookup_by_id/
s/zebra_vrf_lookup/zebra_vrf_lookup_by_id/
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
It seems these two were at some point copied in from rsync; replace with
more recent versions that will hopefully become available in glibc as
well.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
[DL: picked out from: "atomic FIB updates"]
This simplifies the OS-specific route update API into a single entry
point, kernel_route_rib(), which dispatches the various operations
internally.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
In linux, 'scope' is a hint of distance of the IP. And this is
evident from the fact that only lower scope can be used as recursive
via lookup result. This changes all interface routes scope to link
so kernel will allow regular routes to use it as via. Then we do
not need to use the 'onlink' attribute.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
This patch installs labeled static routes in the FIB. The routes are installed
using the RTA_ENCAP (and RTA_ENCAP_TYPE) nested attributes.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6040
Reviewed By: CCR-3091
Testing Done: Tested in SE-1, brief manual testing now
Fix LSP scheduling to occur only after routes are processed because
the LSP resolution depends on the nexthop route being selected. This
is similar to how NHT processing is scheduled.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-6743
Reviewed By: CCR-3233
Testing Done: Verified the failed test multiple times.
Install the statically configured LSPs into the FIB (kernel). This is done
using the new attributes and definitions for MPLS in the kernel -
RTA_VIA, RTA_NEWDST and AF_MPLS.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804
Reviewed By: CCR-3088
Testing Done: Manual in SE-1
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Pass around the vrf_id to rib_match_ipv4_multicast
so that proper lookup can be maintained. Not really
needed yet, but future fixing now.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
rib_match is broken because the prefix is being
treated as a char * pointer instead of the
correct data type.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 8b5d6c95781b7c55faa957a2d3edf00c1ecb5c5a)
Author: Timo Teräs <timo.teras@iki.fi>
Date: Fri Jan 15 17:36:29 2016 +0200
zebra: atomic FIB updates
This commit updates the kernel API so that route changes are
atomically updated using change/replaces messages instead
of first sending a withdraw followed with update.
Same for zclient updates, changes are sent as single ADD
instead of DELETE + ADD.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Isolate the zebra static_XXX functions from zebra_rib.c
This is the first in a series of changes to clean up
the zebra code a bit more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commits allow overriding MTU using netlink attributes on
per-route basis. This is useful for routing protocols that can
advertice prefix specific MTUs between routers (e.g. NHRP).
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
(cherry picked from commit b11f3b54c842117e22e2f5cf1561ea34eee8dfcc)
This flag is used internally in zebra only. And it makes no sense
to expose it over the zclient API, as having it set from client
could corrupt the internal state.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 7eb6136b2732d4782360f9f376336c6d4f667ff0)
Ticket: CM-8228
Signed-off-by: Donald Slice
Reviewed By:
Testing Done: Manual testing succesful. bgp-min and ospf-smoke successful. redistribute-neighbor-smoke
has the same failures as the base image.
Problem was due to considering imported /32 arp entries as elible next-hops for other routes
(in this case a static route.) This confuses the rib since this next-hop is considered both
recursive and onlink. Disallowed the use of this imported arp entry in next-hop determination.
This makes code more robust, consice and readable.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit be6335d682c5ee1b6930345193eda875705fbab2)
On higher warning levels, compilers expect %p printf arguments to be
void *. Since format string / argument warnings can be useful
otherwise, let's get rid of this noise by sprinkling casts to void *
over printf calls.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
MBGP routes are used only for PIM RPF checks and hence should
not be installed in the kernel's FIB. Ignore route node set to Multicast
SAFI.
Signed-off-by: Balaji.G <balajig81@gmail.com>
Acked-by: Everton Marques <everton.marques@gmail.com>
[pushed down rn->table->info assignment below assert]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 9511633e08ff15c23608983fdc1bc735d427332e)
Conflicts:
zebra/zebra_rib.c
depending on the usage scenario (and availability of multitopology IGP
protocols, which is currently zero in Quagga), different approaches of
Multicast RPF lookups are useful.
Reference behaviours from commercial vendors are urib-only/mrib-only
(Juniper, depending on inet.2 availability) and lowest-distance (Cisco).
As we are currently without MT IGP support, mrib-first seems the most
useful default for Quagga.
Cc: Everton Marques <everton.marques@gmail.com>
Cc: Balaji G <balajig81@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The multicast code needs to know the route_node in addition to the rib
entry in order to perform distance or prefix-length comparisons. Add it
as optional "out" pointer parameter.
Cc: Everton Marques <everton.marques@gmail.com>
Cc: Balaji G <balajig81@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a followup to 9511633 ("zebra: MBGP routes should not be
installed in the kernel"), which was correct in disabling MRIB routes
being installed in the kernel, yet broke the MRIB since now routes were
never marked as active.
Hence, push down the check into the kernel install functions, so that
the routes are still marked active. At the same time, the FPM calls get
a check each since otherwise we'd bump the FPM interface on MRIB
updates.
Fixes: 9511633 ("zebra: MBGP routes should not be installed in the kernel")
Cc: Everton Marques <everton.marques@gmail.com>
Cc: Balaji G <balajig81@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
With the MRIB being independent from the Unicast RIB, there's currently
now way to add static routes to the MRIB. Address that by adding a
separate set of commands for MRIB static routes.
Combines these original patches:
- zebra: mrib: ip mroute command to add unicast route to MRIB for multicast RPF.
- zebra: mrib: no ip mroute: Fix removal of static multicast RPF route.
- zebra: mrib: remove unused static_add/delete_ipv4
- zebra: Cleanups to zebra_rib.
- pimd: Merge pim-only branch.
Cc: Everton Marques <everton.marques@gmail.com>
Cc: Balaji G <balajig81@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is the same as rib_lookup_ipv4(), without the SAFI hardcoded.
Cc: Balaji G <balajig81@gmail.com>
Cc: Everton Marques <everton.marques@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
since the same code handles both URIB and MRIB, the debug messages can
get rather confusing if the RIB isn't identified. Mark the MRIB in
debug messages so we can distinguish that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Introduces a logging function that takes a struct route_node * argument,
and prefixes log output with that node's prefix. While this removes
some duplication, it will also later be useful for srcdest route nodes.
Behaviour before and after the patch should be exactly identical.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Added the ability to supply a route-map to the ip import-table command,
which greatly improves filtering between the kernel prefixes in a
non-default table that are imported into the zebra rib.
Ticket:CM-8168
Signed-off-by: Donald Slice
Reviewed By: Donald Sharp
In the case of a route replace failing we
saw two issues with the logging:
1) The route replace was a debug instead of a warn
-> In this case change code to zlog_warn
2) The buf in the route replace was not being initialized
because buf initialization was protected by a debug check.
-> In this case move the buf initialization to inside
the failure case.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
This commit fixes interface based static routes.
static routes are now stored and if an interface
comes up it finds the route and installs it.
Ticket: CM-10869
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
On enable/disable of static routes add and remove them
from the rib as appropriate.
Ticket: CM-10139
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
The static zebra functions are passing around the vrf_id
At the crunchy edges gather the zvrf from passed in
vrf name and pass that around instead.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were passing in the vrf_id pass in the zvrf
instead.
Signed-off-by: donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Quagga does not have proper recovery for route install failure (in
the kernel). The lack of this may not be a significant issue if the
failure is only an exception. However, the introduction of route
replace presents a new failure scenario which was not there earlier.
Before replace, the update operation involved a delete followed by
add; the failure of add would not leave hanging route entries in the
kernel as they would've got deleted first. With route replace, if
the replace fails, recovery action to delete the route is needed, else
the route remains hanging in the kernel.
In particular, with VRFs and in the presence of ECMP/multipath, a
failure mode exists where Quagga thinks that routes have been cleaned
up and deleted from the kernel but the kernel continues to retain them.
This happens when multiple VRF interfaces are moved from one VRF to
another.
This patch addresses this scenario by implementing proper recovery for
route install failure.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10361
Reviewed By: CCR-4566
Testing Done: bgp-min, ospf-min, bgp-smoke, ospf-smoke and manual
Note: There are some test failures and results aren't consistent across
runs; Daniel has resolved many of these through other fixes.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7789, CM-8806
If the route-map for an "ip import-table" denied a route it only flagged
the nexthop as inactive, it did not actually delete the route. This
breaks all directly connected EBGP peers that peer via IPv4 because NHT
finds this /32 with an inactive nexthop.
Move zebra_vrf_XXX functionality into it's own
file so that we can isolate a bit the api edges
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
We were including 'extern struct zebra_t zebrad;' all
over the place. This made no sense. Refactor
into zserv.h where the definition was and remove resulting
unnecessary code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Create the idea of a VRF_UNKNOWN, this is for a vrf where we don't
yet have the vrf_id for it yet.
Refactor the vrf_create code out of existence. We had two code
paths vrf_create and vrf_get. We should use vrf_get to create
the new vrf since XXX_get() creates the data structures now.
Signed-off-by: Donald Sharp
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
In the case of BGP unnumbered RFC 5549 (IPv4 routes with IPv6 nexthop), the
zebra code to handle routes was not initializing the correct VRF id and
locating the correct routing table, resulting in the routes not getting
installed. Fixed with this change.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10247
Reviewed By: CCR-4429
Testing Done: Manual verification
When signalled to stop quagga, iterate through any "other_tables" that may have
been imported and close them all before stopping.
Ticket: CM-9386
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
Zebra code was not handling larger table-ids correctly. There were 2 issues:
a) In the netlink interface, RTA_TABLE was never sent or processed. This
pretty much limited the table-ids that zebra could understand to < 255.
b) In the interface into the zebra RIB (in particular for protocols), there
were some incorrect checks that again assumed the table id should be < 252
or be "main". This is valid only for the Default VRF (for now), for other
VRFs, the table-id should be the value learnt from the kernel.
These two issues are addressed with this change.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-10087, CM-10091
Reviewed By: CCR-4359
Testing Done: Manual
Implement VRF support for static nexthop resolution (NHT). This is
achieved by ensuring the correct VRF is passed as a parameter to
the NHT functions and is stored in the registered nexthop data
structure.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-9457
Reviewed By: CCR-4185
Testing Done: Manual verification
NHT evaluation was not being triggered for any VRF after RIB processing. Fix
this and attempt to schedule only those VRFs for which RIB processing was
scheduled.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-9175
Reviewed By: CCR-4149
Testing Done: Manual verification
zebra: add the creation of the alternative table for rdnbrd in the context of vrfs
When rdnbrd pulls arp entries into table 10, which are then sent into quagga via netlink, the entries were incorrectly being added to the main table. This fix creates or uses the alternative table if the table-id is not default but the vrf-id is default. Tested manually and also run successfully in the /tests/l3/ospf_ebgp_redist_comprehensive_test.py:TestBasicEndToEndPing , which consistently failed bafore this fix was applied.
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
Convert the rest of zebra over to use a Namespae and VRF.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Currently, when RIB processing is initiated (i.e., by calling rib_update()),
all routes are queued for processing. This is not desirable in all situations
because, sometimes the protocol may have an alternate path. In addition,
with NHT tracking nexthops, there are situations when NHT should be kicked
off first and that can trigger subsequent RIB processing.
This patch addresses this by introducing the notion of a trigger event. This
is only for the situation when the entire RIB is walked. The current triggers
- based on when rib_update() is invoked - are "interface change" and "route-
map change". In the former case, only the relevant routes are walked and
scheduled, in the latter case, currently all routes are scheduled for
processing.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7662
Reviewed By: CCR-3905
Note: The initial defect in this area was CM-7420. This was addressed in
2.5.4 with an interim change that only walked static routes upon interface
down. The change was considered a bit risky to do for interface up etc. Also,
this did not address scenarios like CM-7662. The current fix addresses CM-7662.
When static routes are added, they get processed and potentially installed
in the RIB once. Subsequently, NHT is invoked and ends up scheduling the
route for processing again because this is the first time the nexthop is
resolved for NHT. This used to result in a del-add earlier (as noted in
the defect), but is a replace now. This change eliminates the unnecessary
replace by ensuring NHT is invoked first if the static route has a nexthop
that will be tracked by NHT.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Ticket: CM-4573
Reviewed By: CCR-3903
Testing Done: Manual and bgpsmoke
Note: Updates/improves static route NHT patch(es).
The NEXTHOP_TYPE_XXX_IFNAME types were never being used. Remove them
and the code associated with them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we get a static route through an interface convert the interface
name to an ifindex and pass it through to zebra_rib.c. zebra_rib.c
should not care about the ifname.
This code change will allow us to collapse some of the NEXTHOP_XXX types.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During CR for nexthop upstream it was noticed that usage
of prefix2str was not consistent. This fixes this problem
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some of the changes include:
- ensuring IPv6 addresses are printed correctly
- say 'updating' or 'deleting' etc. only when that is actually done
- say 'queuing' or 'dequeuing' only when that is actually done
- print useful info for 'detailed' debug - that now subsumes 'rib queue'
- delete various useless logs
- VRF-specific - print VRF id in RIB debugs prior to prefix
(e.g., 4:37.1.1.0/28)
Ticket: CM-8110
Reviewed By: CCR-3765
Testing Done: Manual testing (2.5-br)
When a Quagga route that is currently installed is superceded by a
kernel route (connected or static route to same destination), the
Quagga route is not uninstalled from the kernel. Fix by ensuring
this case is handled correctly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7152
Reviewed By: CCR-3476
Testing Done: Manual tests and verify failed test.
Fixes: Replace route implementation (IPv4 and IPv6)
Zebra currently performs a delete followed by add when a route needs to be
modified. Change this to use the replace semantics of netlink so that the
operation can possibly be atomic.
Note: This patch handles IPv6 routes, IPv4 already performs a replace.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Ticket: CM-5597
Reviewed By: CCR-3407
Testing Done: Manual testing of various scearnios (Vivek, Satish)
Note: This is an import of patch zebra-ipv6-route-replace.patch from 2.5-br.
Zebra already knows if an interface is unnumbered or not. This
is communicated to OSPF.
OSPF would only send a NEXTHOP_TYPE_IPV4_ONLINK *if* the path
was unnumbered, which it learns from Zebra.
As such, Have OSPF use the normal NEXTHOP_TYPE_IPV4_IFINDEX
type for unnumbered paths. In Zebra, if the ifindex recieved
is unnumbered then assume that the link is NEXTHOP_FLAG_ONLINK.
Ticket: CM-8145
Reviewed-by: CCR-3771
Testing: See bug
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
After the optimization introduced by patch zebra-redist-update-fix.patch
which implements "replace" semantics for redistributed routes instead of
a delete followed by add, the code was passing an incorrect route for
redistribute deletion in one case. This is mainly inconsequential as of
now as the deletion process primarily cares about only the destination, but
the code needs to be corrected and that is done here.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fixes: zebra-redist-update-fix.patch
Ticket: CM-8112
Reviewed By: CCR-3760
Testing Done: Trivial
Note:
1. Needs changes after IPv6 route replace patches are included.
2. Imported from 2.5-br patch zebra-redist-delete-fix.patch
rib_bogus_ipv6 was removed upstream. We need to do the same thing
and ensure that our ipv6 multipath still works
Ticket: CM-8152
Reviewed by: CCR-3775
Testing: Ran all multipath tests
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch lets the netlink sockets work per VRF.
* The definition of "struct nlsock" is moved into zebra/rib.h.
* The previous global variables "netlink" and "netlink_cmd" now
become the members of "struct zebra_vrf", and are initialized
in zebra_vrf_alloc().
* All relative functions now work for a specific VRF, by adding
a new parameter which specifies the working VRF, except those
functions in which the VRF ID can be obtained from the interface.
* kernel_init(), interface_list() and route_read() are now also
working per VRF, and moved from main() to zebra_vrf_enable().
* A new function kernel_terminate() is added to release the
netlink sockets. It is called from zebra_vrf_disable().
* Correct VRF ID, instead of the previous VRF_DEFAULT, are now
passed to the functions of processing interfaces or route
entries.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Conflicts:
lib/memtypes.c
zebra/rib.h
zebra/rt_netlink.c
Conflicts:
zebra/if_netlink.c
zebra/if_sysctl.c
zebra/kernel_null.c
zebra/rib.h
zebra/rt_netlink.c
zebra/rt_netlink.h
zebra_vrf_enable() is the callback for VRF_ENABLE_HOOK.
It presently needs do nothing.
zebra_vrf_disable() is the callback for VRF_DISABLE_HOOK.
It presently withdraws routes, shuts down interfaces, and
clears the router-id candidates in that VRF.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Introduce new commands to configure static routes in any VRF, by
appending the old static route commands with a new parameter
"vrf N".
A new parameter "const char *vrf_id_str" is added to the functions
zebra_static_ipv4() and static_ipv6_func() to get the configured
VRF ID.
A new member "vrf_id" is added to the "struct static_ipv4" and
"struct static_ipv6", indicating which VRF this static route is
configured in.
But till now, no interface can exist in any non-default VRF. So
these static routes in non-default VRFs are kept inactive.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/zebra_rib.c
zebra/zebra_vty.c
Introduce a new "struct nexthop_vrfid" to specify a nexthop together
with the VRF ID it belongs to.
Thus in route_match_interface(), we can lookup the interface from
the correct VRF.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/zebra_rib.c
zebra/zebra_routemap.c
A new member "vrf_id" is added to "struct rib", reflecting the VRF
which it belongs to.
A new parameter "vrf_id" is added to the relative functions where
need, except those:
- which already have the parameter "vrf_id"; or
- which have a parameter in type of "struct rib"; or
- which have a parameter in type of "struct interface".
All incoming routes are set to default VRF.
In fact, all routes in FIB are kept in default VRF. And the logic
is not changed.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
[DL: conflicts fixed + compile warning fix]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/connected.c
zebra/kernel_socket.c
zebra/rib.h
zebra/rt_netlink.c
zebra/zebra_rib.c
zebra/zserv.c
Conflicts:
zebra/connected.c
zebra/interface.c
zebra/kernel_socket.c
zebra/rib.h
zebra/rt_netlink.c
zebra/rtread_getmsg.c
zebra/zebra_rib.c
zebra/zebra_vty.c
zebra/zserv.c
Previously "struct vrf" is defined locally in zebra. Now it is moved
to be a lib module.
This is the first step to support multi-VRF in quagga. The
implementation is splitted into small patches for the purpose of
easy review.
* lib:
"struct vrf" with basic members is defined in vrf.c. The member
"void *info" is for user data.
Some basic functions are defined in vrf.c for adding/deleting/
looking up a VRF, scanning the VRF table and initializing the
VRF module.
The type "vrf_id_t" is defined specificly for VRF ID.
* zebra:
The previous "struct vrf" is re-defined as "struct zebra_vrf";
and previous "vrf" variables are renamed to "zvrf".
The previous "struct vrf" related functions are removed from
zbera_rib.c. New functions are defined to maintain the new
"struct zebra_vrf".
The names vrf_xxx are reserved for the functions in VRF module.
So:
- the previous vrf_table() are renamed to zebra_vrf_table();
- the previous vrf_static_table() are renamed to
zebra_vrf_static_table().
The main logic is not changed.
BTW: Add a statement to zebra_snmp.c telling that the SNMP is
running only for the MIBs in the default VRF.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
lib/Makefile.am
zebra/zebra_rib.c
zebra/zebra_vty.c
Conflicts:
lib/Makefile.am
lib/memtypes.c
zebra/rib.h
zebra/zebra_rib.c
zebra/zebra_rnh.c
zebra/zebra_rnh.h
zebra/zebra_vty.c
If you enter:
ipv6 route 2002:44:44:44::44/128 swp1 4
ipv6 route 2002:44:44:44::44/128 swp1 99
You get:
host-111# show ipv6 route
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv6, I - IS-IS, B - BGP, A - Babel, T - Table,
> - selected route, * - FIB route
S 2002:44:44:44::44/128 [99/0] is directly connected, swp1
S>* 2002:44:44:44::44/128 [4/0] is directly connected, swp1
This problem is fixed in the ipv4 code path. Copying the same
code from the ipv4 into the ipv6 code path fixes the issue.
With the fix:
host-111(config)# ipv6 route 2002:44:44:44::44/128 swp1 4
host-111(config)# do show ipv6 route
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv6, I - IS-IS, B - BGP, A - Babel, T - Table,
> - selected route, * - FIB route
S>* 2002:44:44:44::44/128 [4/0] is directly connected, swp1
C * fe80::/64 is directly connected, swp1
C>* fe80::/64 is directly connected, eth0
host-111(config)# ipv6 route 2002:44:44:44::44/128 swp1 99
host-111(config)# do show ipv6 route
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv6, I - IS-IS, B - BGP, A - Babel, T - Table,
> - selected route, * - FIB route
S>* 2002:44:44:44::44/128 [99/0] is directly connected, swp1
C * fe80::/64 is directly connected, swp1
C>* fe80::/64 is directly connected, eth0
host-111(config)#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct static_ipv4' and 'struct static_ipv6' structures
are essentially the same. Collapse them into one data structure
'struct static_route'.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7420
Reviewed By: Vivek, Donald
Testing Done: UT, verification of the fix + ospf and bgp smoke
On a link delete/down event, schedule only the prefixes which have a
static RIB too.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7309
Reviewed By: CCR-3448
Testing Done: passing route_ospf_route_thrash, the new redist test
When zebra was modified to have redistributed routes follow a replace
logic instead of the del-add, one case was missed. When a route is
replaced with a change only to the source protocol (say from static
to bgp), its possible that the new source protocol is not selected
for redistribution by a client. Since we did not delete the route
initially, if the add is not allowed for the new source protocol
for a client, we need to send a delete of that redistributed route.
This is what the patch fixes.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-6768
Reviewed By: CCR-3207
Testing Done: bgpsmoke, smoke, topo to create failure
Redistributing routes goes through a del/add cycle whenever a redistributed
is updated. This del/add cycle causes disruption by causing traffic loss
for brief/long periods of time(6-8 s in case of OSPF). The modifications in
this patch remove the del/add cycle to ensure that this disruption doesn't
happen.
Also fixed sending no forwarding address when announcing IPv4 routes with IPv6
nexthops, and sending nexthop only when there is a single path.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-6854
Reviewed By: CCR-3297
Testing Done: bgpsmoke, bgpclos to verify setting source (in 2.5-br)
Two pieces prevented the user from specifying a route-map with set src on
IPv4 routes learnt via BGP's RFC 5549 model (v4 prefix with v6 nexthop):
- There was code missing in the section specific to 5549 in setting
the src in the netlink message
- During RIB processing, route-map processing was ignored when the NH
was v6 and the route itself was v4.
As per the code, all route-map processing that uses nexthop validates the
NH type before applying the route-map and so there should be no errors
as a consequence of relaxing bullet 2 above.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket:
Reviewed By: CCR-3335
Testing Done: bgpsmoke, ENHE tests etc.
Add support for filtering routes from upper layer protocols to zebra
via route-maps for IPv6. The same functionality already existed for
IPv4.
In addition, add support for setting source of routes via IPv6 protocol
map.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Reviewed-by: Vipin Kumar <vipin@cumulusnetworks.com>
This adds support for BGP RFC 5549 (Extended Next Hop Encoding capability)
* send and receive of the capability
* processing of IPv4->IPv6 next-hops
* for resolving these IPv6 next-hops, itsworks with the current
next-hop-tracking support
* added a new message type between BGP and Zebra for such route
install/uninstall
* zserv side of changes to process IPv4 prefix ->IPv6 next-hops
* required show command changes for IPv4 prefix having IPv6 next-hops
Few points to note about the implementation:
* It does an implicit next-hop-self when a [IPv4 prefix -> IPv6 LL next-hop]
is to be considered for advertisement to IPv4 peering (or IPv6 peering
without Extended next-hop capability negotiated)
* Currently feature is off by default, enable it by configuring
'neighbor <> capability extended-nexthop'
* Current support is for IPv4 Unicast prefixes only.
IMPORTANT NOTE:
This patch alone isn't enough to have IPv4->IPv6 routes installed into
the kernel. A separate patch is needed for that to work for the netlink
interface.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Vivek Venkatraman <vivek@cumulusnetworks.com>
Donald Sharp <sharpd@cumulusnetworks.com>
interface or nexthop status. However, this route may not be selected as
the best and may not be the prior best. The flag needs to be reset
after evaluating the route as not doing so may prevent future nexthop
validation for this route.
Zebra currently performs a delete followed by add when a route needs to be
modified. Change this to use the replace semantics of netlink so that the
operation can possibly be atomic.
Note: Only implemented for IPv4 currently.
When a path of a static route is deleted, there is no need to reschedule and
run the RIB selection again, it is sufficient to just delete this path.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Satish Ashok <sashok@cumulusnetworks.com>
Ensure that resolution of a nexthop using a default route is not done in the
nexthop validation/update code in zebra_rib.c also. This is an addition to
the zebra-nht-no-default.patch which made the checks only in the NHT code. In
the case of scenarios like interface down, this nexthop update code will kick
in first to update the route before the NHT code comes into play; without the
additional fix, this code could incorrectly resolve the nexthop over a default
route, even when disallowed by the administrator.
BGP: Fix network import check use with NHT instead of scanner
When next hop tracking was implemented and the bgp scanner was eliminated,
the "network import-check" command got broken. This patch fixes that
issue. NHT is used to not just track nexthops, but also the static routes
that are announced as part of BGP's network command. The routes are
registered only when import-check is enabled. To optimize performance,
we register static routes only when import-check is enabled.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
When NHT calls rib_process() to be invoked for a prefix, the RIB has already
been marked as having NH changes. The first call to nexthop_active_update
clears this flag and attempts to re-determine if there are any NH changes for
a prefix. However, when the NH is recurisve, this fails. Furthermore, since
NHT has already determined that this RIB has NH changes, there's no need to
ascertain that again. The original patch used static route as the proxy to
skip this call which was incorrect since rib_process can be invoked for
static routes for reasons other than NHT. So, this patch removes the check
for static route and directly checks if the NH changed flag has been set.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
The code is structured in a way that ends up invoking zebra_delete_rnh()
multiple times which can lead to crashes and asserts. This patch fixes
the issue by setting a flag when an RNH structure is being deleted and
ignores any further attempts to delete the structure.
When a route is resolved recursively, and the recursively resolved nexthop
has the onlink attribute, the route is not programmed with the nexthop with
the onlink attribute. This patch addresses that.
Zebra: Redistribute routes from non-main kernel table to main.
This can be the basis for many interesting features such as variations
of redistribute ARP, using zebra as the RIB in the presence of multiple
routing protocol stacks etc. The code only supports IPv4 for now, but
the infrastructure is in place for IPv6.
Usage:
There is a new route type introduced by this model: TABLE. Routes
imported from alternate kernel tables will have their protocol type set to
TABLE.
Routes from alternate kernel tables MUST be first imported into the main
table via "ip import-table <table id>". They can then be redistributed via
a routing protocol via the "redistribute table" command. Each imported table
can an optional administrative distance specified. In Zebra, a route with a
lower distance is chosen over routes with a higher distance. So, distance
is how the user can choose to prioritize routes from a particular table over
routes from other tables or routes learnt another way in zebra.
Route maps for imported tables are specified via "ip protocol" command in
zebra. Route maps for redistributed routes within a routing protocol are
subject to the route map options supported by the protocol. The
"match source-protocol" option in route maps can match against "table"
to filter routes learnt from alternate kernel routing tables.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
——————————————-------------
- etc/init.d/quagga is modified to support creating separate ospf daemon
process for each instance. Each individual instance is monitored by
watchquagga just like any protocol daemons.(requires initd-mi.patch).
- Vtysh is modified to able to connect to multiple daemons of the same
protocol (supported for OSPF only for now).
- ospfd is modified to remember the Instance-ID that its invoked with. For
the entire life of the process it caters to any command request that
matches that instance-ID (unless its a non instance specific command).
Routes/messages to zebra are tagged with instance-ID.
- zebra route/redistribute mechanisms are modified to work with
[protocol type + instance-id]
- bgpd now has ability to have multiple instance specific redistribution
for a protocol (OSPF only supported/tested for now).
- zlog ability to display instance-id besides the protocol/daemon name.
- Changes in other daemons are to because of the needed integration with
some of the modified APIs/routines. (Didn’t prefer replicating too many
separate instance specific APIs.)
- config/show/debug commands are modified to take instance-id argument
as appropriate.
Guidelines to start using multi-instance ospf
---------------------------------------------
The patch is backward compatible, i.e for any previous way of single ospf
deamon(router ospf <cr>) will continue to work as is, including all the
show commands etc.
To enable multiple instances, do the following:
1. service quagga stop
2. Modify /etc/quagga/daemons to add instance-ids of each desired
instance in the following format:
ospfd=“yes"
ospfd_instances="1,2,3"
assuming you want to enable 3 instances with those instance ids.
3. Create corresponding ospfd config files as ospfd-1.conf, ospfd-2.conf
and ospfd-3.conf.
4. service quagga start/restart
5. Verify that the deamons are started as expected. You should see
ospfd started with -n <instance-id> option.
ps –ef | grep quagga
With that /var/run/quagga/ should have ospfd-<instance-id>.pid and
ospfd-<instance-id>/vty to each instance.
6. vtysh to work with instances as you would with any other deamons.
7. Overall most quagga semantics are the same working with the instance
deamon, like it is for any other daemon.
NOTE:
To safeguard against errors leading to too many processes getting invoked,
a hard limit on number of instance-ids is in place, currently its 5.
Allowed instance-id range is <1-65535>
Once daemons are up, show running from vtysh should show the instance-id
of each daemon as 'router ospf <instance-id>’ (without needing explicit
configuration)
Instance-id can not be changed via vtysh, other router ospf configuration
is allowed as before.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Honor setting source via route map and pushing that to the kernel.
With recursive routes, the ability to set the source IP address of a route
via a routemap has been broken. This patch fixes that.
To allow route map to set a source and then to unapply the route map and
have the source be taken out, I've introduced a new field in the nexthop
data structure called rmap_src. This field is zero'd before invoking the
route map apply function.
Today, no protocol daemon specifies the src in its route update to zebra.
If that happens, I didn't want to stomp on it and so have left the src
field intact instead of reusing that for the routemap to play with.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Zebra: Gather and display detailed info about clients of Zebra
The display of zebra client info is rather paltry: just the name and the FD.
For troubleshooting and general helpfulness, its useful to gather more info
about each client and display that. This patch does just that.
Zebra: Add route-map support for Next Hop Tracking
It is sometimes useful to restrict the resolution of recursive routes
to only specific via's. For example, in some configurations resolving
a route through a default route is not acceptable.
This patch adds a new route-map attach point, to zebra's next-hop-tracking
server. Whenever NHT is considering sending notification of a route
resolution, it applies a specified route-map and only if it passes, is the
NHT reachable message sent to the appropriate client protocol (BGP, OSPF etc.).
If the route-map filters the resolution, then a withdraw is sent to the
client protocol.
The route-map is sent the ip address of the route via which the resolution is
happening as well as the valid NHs associated with that route.
We also add support for matching on IP addr prefix len and source protocol
to ensure that resolution happens only via a very specific route.
Credit
------
A huge amount of credit for this patch goes to Piotr Chytla for
their 'route tags support' patch that was submitted to quagga-dev
in June 2007.
Documentation
-------------
All ipv4 and ipv6 static route commands now have a "tag" option
which allows the user to set a tag between 1 and 65535.
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag ?
<1-65535> Tag value
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag 40
quagga(config)#
quagga# show ip route 1.1.1.1/32
Routing entry for 1.1.1.1/32
Known via "static", distance 1, metric 0, tag 40, best
* 10.1.1.1, via swp1
quagga#
The route-map parser supports matching on tags and setting tags
!
route-map MATCH_TAG_18 permit 10
match tag 18
!
!
route-map SET_TAG_22 permit 10
set tag 22
!
BGP and OSPF support:
- matching on tags when redistribing routes from the RIB into BGP/OSPF.
- setting tags when redistribing routes from the RIB into BGP/OSPF.
BGP also supports setting a tag via a table-map, when installing BGP
routes into the RIB.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
BGP: Reprocess the trigger points when an attached route map changes
Currently, modifications to route maps do not affect already processed
routes; they only affect new route updates. This patch addresses this
limitation.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
quagga: nexthop-tracking.patch
Add next hop tracking support to Quagga. Complete documentation in doc/next-hop-tracking.txt.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
from the protocols have ifindices and nexthop addresses in two different
structures. This patch combines them to ensure that the correct APIs can
be called. Also, given that IPV6 Linux implementation does not support the
rta_XXX APIs for multipath, the communication with the kernel is in terms
of a single nh/ifindex pair.
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
strip the explicit __func__ present on all calls and make the prefix
argument a transparent union.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Feng Lu <lu.feng@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Change the datastructure for recursive routes. This brings the following
benefits:
By using struct nexthop also to store nexthops obtained by recursive
resolution, we can get rid of quite a bit of code duplication in the fib
management. (rt_netlink, rt_socket, ...)
With the new datastructure we can make use of all available paths when
recursive routes are resolved with multipath routes.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
zebra was not checking afi/safi values. This was leading to crashes where
these values were coming directly from some protocol's on-wire fields.
Safeguarding them in zebra is a good start.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Enhance zebra to send routes to the (optional) Forwarding Path Manager
component using the interface defined by fpm/fpm.h.
* configure.ac
- Add --enable-fpm flag.
The FPM-related code in zebra is activated only if the build is
configured with '--enable-fpm'.
- Add HAVE_NETLINK automake conditional.
This allows us to conditionally build netlink-dependent C code.
* zebra/{rib.h,zebra_rib.c}
- Add the 'fpm_q_entries' field to the rib_dest_t structure. This
allows dests to be placed on the fpm queue.
- Define a couple new rib_dest_t flags that hold FPM-related
state.
- Invoke the zfpm_trigger_update() function for a route_node
whenever the information to be sent to the FPM changes.
- rib_can_delete_dest(): Return FALSE if we have to update the FPM
about the given dest. This ensures that the dest is not deleted
even if there are no ribs hanging off of it.
* zebra/zebra_fpm.c
This file holds most of the code for interacting with the FPM.
- If quagga was configured with '--enable-fpm', periodically try
to connect to the FPM.
- When the connection comes up, enqueue all relevent dests to the
FPM queue.
- When the FPM socket is readable, dequeue the next rib_dest_t
from the FPM queue, encode it in to a message and send the
message to the FPM.
- When the connection to the FPM goes down, remove all dests from
the FPM queue, and then start trying to connect to the FPM
again.
- Expose the following new operational commands:
show zebra fpm stats
clear zebra fpm stats
* zebra/zebra_fpm_netlink.c
- zfpm_netlink_encode_route(): Function to encode information
about a rib_dest_t in netlink format.
* zebra/zebra_fpm_private.h
Private header file for the zebra FPM module.
* zebra/zebra_fpm.h
Header file exported by zebra FPM module to the rest of zebra.
* zebra/debug.c
Add the 'debug zebra fpm' command.
* zebra/main.c
Initialize the zebra-FPM code on startup.
* zebra/misc_null.c
Add stub for zfpm_trigger_update().
* zebra/Makefile.am
- Include new file zebra_fpm.c in build.
- Include zebra_fpm_netlink.c in build if HAVE_NETLINK is defined.
* vtysh/Makefile.am
Include zebra_fpm.c in list of files that define cli commands.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* zebra/{rib.h,zebra_rib.c}
Add nexthop_type_to_str(), which returns a human-readable string
corresponding to a nexthop type.
* zebra/rt_netlink.[hc]
- Add new header file that exposes some existing and new
netlink-related functions from rt_netlink.c to the rest of
zebra.
addattr32
addattr_l
rta_addattr_l
nl_msg_type_to_str (new)
nl_rtproto_to_str (new)
- Use nexthop_type_to_str() instead of the static array
'nexthop_types_desc'.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* lib/zebra.h
Add macro ZEBRA_NUM_OF, which returns the number of elements in a
static array.
* zebra/rib.h
Add the rib_tables_iter_t structure and associated functions,
which allow one to walk all tables in the rib.
* zebra/zebra_rib.c
- Add vrf_id_get_next() to retrieve the first VRF id (if any) that
is greater than a given VRF id.
- Add rib_tables_iter_next().
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add some code that allows us to determine which VRF and AFI/SAFI a
given RIB table corresponds to.
* zebra/rib.h
Add rib_table_info_t structure, which contains information about
the VRF, AFI and SAFI that a table is for.
* zebra/zebra_rib.c
- Add the vrf_table_create() function, which creates a table and
sets its 'info' pointer to a newly created rib_table_info_t.
The 'info' pointer allows us to go from a route_node or a table
to the associated vrf.
- vrf_alloc(): Use vrf_create_table() to create tables.
* lib/memtypes.c
Add memory type for rib_table_info_t.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add the rib_dest_t structure to hold per-prefix state in the routing
information base. This gives us an appropriate place to maintain the
queueing state of a route_node. Queuing state was previously being
stored on the first rib in the list of ribs hanging off the
route_node.
* zebra/rib.h
- Add new structure rib_dest_t.
- Remove the rn_status field from 'struct rib', it is no longer
required.
- Add macros (RNODE_FOREACH_RIB, RNODE_FOREACH_RIB_SAFE) for
walking all 'struct ribs' corresponding to a route_node. These
hide the fact that there is an intermediate rib_dest_t
structure.
- Add a few utility inlines to go between a rib_dest_t and
associated structures.
* zebra/zebra_rib.c
- rib_link()/rib_unlink()
Tweak for new behavior, where the 'info' pointer of a route_node
points to a rib_dest_t. The list of ribs for a prefix now hangs
off of the dest.
Change the way we ref count route_nodes. We now hold a single
ref count on a route_node if there is a corresponding
rib_dest_t.
- Maintain the queuing state of a route_node on the flags field of
the rib_dest_t.
- Add the rib_gc_dest() function, which deletes a rib_dest_t if it
is no longer required. A rib_dest_t can be deleted iff there are
no struct ribs hanging off of it.
- Call rib_gc_dest() any time we unlink a rib from the
rib_dest_t. Currently we only need to call it once, just before
we return from rib_process().
* zebra/{redistribute,zebra_rib,zebra_snmp,zebra_vty}.c
Use new macros to walk over route_node ribs.
* lib/memtypes.c
Add memory type for rib_dest_t.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Use the array_size() helper macro. Replaces several instances of local
macros with the same definition.
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Make static routes respect non-default routing tables.
BEFORE PATCH
------------
! in zebra.conf
table 1
! add static route
vtysh> ip route 10.0.0.0/30 eth0
cumulus@net-top0:~$ ip route
default via 192.168.0.2 dev eth0
10.0.0.0/30 dev eth0 proto zebra
192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15
! nothing in table 1
cumulus@net-top0:~$ ip route show table 1
AFTER PATCH
-----------
! in zebra.conf
table 1
! add static route
vtysh> ip route 10.0.0.0/30 eth0
cumulus@net-top0:~$ ip route
default via 192.168.0.2 dev eth0
192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15
! static route in table 1
cumulus@net-top0:~$ ip route show table 1
10.0.0.0/30 dev eth0 proto zebra
Signed-off-by: Nolan Leake <nolan@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit af56d404cd,
which was accidentally duplicating functionality from commit
2ea1ab1 "zebra: ZEBRA_HELLO and mopping up routes (BZ#448)"
Conflicts:
zebra/zebra_rib.c
Signed-off-by: David Lamparter <equinox@diac24.net>
The steps were:
$ git checkout google-is-is
$ git merge quagga
$ git checkout google-is-is -- isisd
# Resolve conflicts in the following:
lib/md5.h
zebra/rt_netlink.c
zebra/zebra_rib.c
zebra/zserv.c
Note that the content in the isisd directory is left unchanged in the
merge. As a result, changes made to isisd as part of the following
commits on the quagga mainline are dropped.
# 8ced4e82 is the merge base, e96b3121 is the current quagga master
$ git log --oneline --reverse 8ced4e82..e96b3121 -- isisd
5574999 isisd: fix crash on "no router isis" (BZ#536)
8998075 isisd: raise hello rate for DIS (BZ#539)
306ca83 isisd: include hash.h, not hash.c
b82cdeb delete CVS keywords
2f65867 isisd: indent longopts array
b511468 quagga: option "-z" ("--socket <path>") added
05e54ee build: delete .cvsignore files
b4e45f6 fix zebra protocol after MP-BGP changes
7fd6cd8 isisd: fix circuit state machine
907fd95 isisd: send proper LSP after DIS election
d034aa0 isisd: fix wrong next-hops from SPF
c25eaff isisd: unexpected kernel routing table (BZ#544)
e6b03b7 isisd: implement MD5 circuit authentication
* zebra/zebra_rib.c: Add code to clean up routes added by a client
(as identfied by 'rib type').
* zebra/zserv.[ch]: Maintain the type of the routes added by a
client on the 'zserv' structure -- assume that a given client uses
a single route type for now.
Clean up routes from a client when the client goes away (in
zebra_client_close()).
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
* zebra/rt_netlink.c:
- Pick up the hardware address of an interface when we receive a
netlink link change message. Extract code for parsing the
link-layer hardware address into a new function so we can reuse
it.
- netlink_routing_table(): Update to handle multipath routes.
- netlink_route_change(): Update to handle multipath routes. Fix
problem where the metric was not being read out.
* zebra/zebra_rib.[ch]: Extern nexthop_ipv4_ifindex_add() -- it is
now called from the netlink code.
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
* Initial import of the Babel routing protocol, ported to Quagga.
* LICENCE: Update the original LICENCE file to include all known potentially
applicable copyright claims. Ask that any future contributors to babeld/
grant MIT/X11 licence to their work.
* *.{c,h}: Add GPL headers, in according with the SFLC guidance on
dealing with potentially mixed GPL/other licensed work, at:
https://www.softwarefreedom.org/resources/2007/gpl-non-gpl-collaboration.html
This patch contains the following:
1. Addition of IPv6 SAFI_MULTICAST BGP routes into the RTM's RIB.
2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the RTM's RIB.
This patch contains the following:
1. Addition of IPv4 SAFI_MULTICAST BGP routes into the RTM's RIB.
2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the RTM's RIB.
When the same ip address is used on several interfaces,
and one of them gets deleted (or equivalent: set to down and
then address removed), rib_delete_ipv[46] will also remove
the connected route from other interfaces.
rib_delete_ipv[46] is called twice when an interface is
deleted:
- for the "ifdown" event
- for the address removal
(note: this may be specific to the netlink interface of linux)
The second call does not find the connected route to that same
ifindex anymore, but deletes similar connected routes to any
other ifindex instead.
Reason: the ifindex check is on the same level as the check
for ZEBRA_ROUTE_CONNECT/NEXTHOP_TYPE_IFINDEX. If everything
matches except for the ifindex, the "else" part (intended for
different route types) is executed, thus removing the route
from the wrong interface.
fix: move ifindex check inside the "then" part of the check
for ZEBRA_ROUTE_CONNECT/NEXTHOP_TYPE_IFINDEX. Now connected
routes to other ifindexes will not spill over to the "else"
part for different route types anymore.
ZEBRA_HELLO message is used by routing daemons to inform zebra
what type of routes daemon will be announcing to zebra. Also
zebra uses route_type_oaths array to track which daemon announces
which protocol. Zebra mops up routes if daemon didn't for some
reason.
adding protocols and forgetting to update zebra_rib.c currently causes
a beyond end of array access for the default distance value. fix by
making 150 the default distance for unknown routing protocols.
150 is higher than all other IGPs but lower than iBGP (200)
* zebra/zebra_rib.c
* nexthop_active_update(): make local int vars unsigned
* nexthop_active_check(): return unsigned for consistency
* rib_dump(): cast time in printf format
* vrf_free(): remove unused function
* vrf_lookup_by_name(): idem
* rib_if_up(): idem
* rib_if_down(): idem
A static route like below: ip route 172.16.1.0/30 192.168.101.162 11
does not move properly to a new interface when the
interface used goes down. Zebra reports that it have
moved but kernel isn't informed so the route is lost.
* zebra_rib.c: (nexthop_active_update) if ifindex has changed, then the
route should be considered to have changed.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Do some cleanup work on recently added meta-queue code:
* use table rather than switch
* indent with quagga standard indentation
* since meta_queue_new is only used at initialization
allocation failure should be fatal.
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra_rib.c: When doing a RIB update, routes in process of removal
should be ignored. This fixes bugs where a route is removed but a
recursive route is not changed.
Signed-off-by: Paul Jakma <paul@quagga.net>
2008-01-08 Michael Larson <mike@vyatta.com>
* zebra_rib.c: (nexthop_active_check) Replace if_is_up with
if_is_operative to solve problems with static interface
routes not behaving properly with link-detect.
2007-06-25 Denis Ovsienko
* zebra_rib.c: (rib_add_ipv4_multipath) Loop through RIB
is using 'same' variable, but RIB_ENTRY_REMOVED check
is testing the constant 'rib' variable, fix. Impact
unknown at this point.
2007-05-01 David L Stevens <dlstevens@us.ibm.com>
* (general) These changes collectively add route-map and
prefix-list support to zebra and fix a bug in "show
route-map" (with no argument).
* doc/main.texi: added route-map, prefix-list, ip protocol
and set src documentation
* lib/command.h: added PROTOCOL_NODE type
* lib/log.c: (proto_name2num) new function, protocol name to
number translation.
* lib/routemap.c: (vty_show_route_map) fixed "show route-map"
without route-map name
* lib/routemap.h: added RMAP_ZEBRA type
* lib/zebra.h: added proto_name2num() prototype
* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and
plist
* vtysh/Makefile.am: added zebra_routemap.c
* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP
* zebra/connected.c: (connected_up_ipv4) added src preference argument
to rib_add_ipv4()
* zebra/kernel_socket.c: (rtm_read) ditto
* zebra/main.c: added prefix list initialization
* zebra/Makefile.am: added zebra_routemap.c source file
* zebra/rib.h: added generic address union "g_addr" and use in
existing places that had an explicit union.
Added "src" to struct nexthop.
Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4.
* zebra/rt_netlink.c: (netlink_routing_table) set preferred source on
netlink messages.
(netlink_route_change) ditto
(netlink_route_multipath) ditto.
* zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to
rib_add_ipv4() call.
* zebra/rtread_proc.c: (proc_route_read) ditto
* zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument.
(nexthop_ipv4_ifindex_add) ditto
(rib_add_ipv4) ditto
(nexthop_active_check) Add route-map processing.
* zebra/zebra_routemap.c: new file for zebra route-map commands.
* zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol
(vty_show_ip_route_detail) added "src" printing
(vty_show_ip_route) ditto
(show_ip_protocol_cmd) new command, list routemaps.
(config_write_protocol) write out routemap protocl config.
(zebra_vty_init) Install the new routemap protocol commands.
* zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg
(zebra_init) init zebra route-maps.
* zebra/zserv.h: add zebra_route_map_init
2006-12-08 Piotr Chytla <pch@packetconsulting.pl>
* zebra_rib.c: (static_install_ipv{4,6}) Case where existing
RIB is updated must explicitely rib_addqueue the route_node,
to ensure the update actually takes effect.
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* rib.h: (struct rib) Add a route_node rn_status flag field,
this has to be copied every time head RIB of a route_node
changes.
Remove the rib lock field, not needed - see below.
Add a status field for RIB-private flags.
* zebra_rib.c: Add a global for the workqueue hold time, useful
for testing.
(general) Fix for bug #268. Problem originally
detailed by Simon Bryden in [quagga-dev 4001].
Essentially, add/delete of a RIB must happen /before/ the
queue. Best-path selection (ie rib_process) and reaping of
freed RIBs can then be done after queueing. Only the route_node
is queued - no important RIB state (i.e. whether a RIB is to be
deleted) is queued.
(struct zebra_queue_node_t) Disappears, no longer need to
track multiple things on the queue, only the route_node.
(rib_{lock,unlock}) removed, RIBs no longer need to be
refcounted, no longer queued.
(rib_queue_qnode_del) Removed, deleted RIBs no longer deleted
via the queue.
(rib_queue_add_qnode) deleted
(rib_queue_add) Only the route_node is queued for best-path
selection, we can check whether it is already queued or
not and avoid queueing same node twice - struct rib * argument
is not needed.
(rib_link/unlink) (un)link RIB from route_node.
(rib_{add,del}node) Front-end to updates of a RIB.
(rib_process) Reap any deleted RIBs via rib_unlink.
Unset the route_node 'QUEUED' flag.
(General) Remove calls to rib_queue_add where add/del node was
called - not needed, update calls where not.
Ignore RIB_ENTRY_REMOVEd ribs in loops through route_nodes
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* {ioctl,kernel}_null.c: Dummy/Null kernel method implementations,
useful for testing zebra code that calls such methods.
* {redistribute,misc}_null.c: Dummy/Null methods, as above. But
for zclient, and for various misc functions.
* test_main.c: Test harness for zebra, currently just to test the
RIB.
* Makefile.am: Build testzebra using above.
* zebra_rib.c: Add a global for the workqueue hold time, useful
for testing.
2006-07-27 Rumen Svobodnikov <rumen@telecoms.bg>
* connected.c: (connected_up_ipv4) interface connected routes always
go to table main (or otherwise they cannot be used by linux as
nexthops)
* zserv.c: (zread_ipv4_add) send route to the correct routing table
* zebra_rib.c (static_install_ipv4) set routing table
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* rt_netlink.c: (netlink_interface_addr) Fix CID #104, can not
proceed if addr is NULL.
* zebra_rib.c: (static_add_ipv6) Fix CID #18, double check
required arguments are supplied for the given nexthop type.
2006-01-30 Paul Jakma <paul.jakma@sun.com>
* zebra_rib.c: (rib_process) Fourth time lucky on this jinxed
commit, last commit had a hole that could allow connected
route selection to escape beyond the connected route logic.
This time I cross-checked with Gunnar first. ;)
2006-01-25 Gunnar Stigen <gunnar.stigen@axxessit.no>
* zebra_rib.c: (rib_process) Application of Gunnar's earlier
metric selection RIB change included incorrect tidy-ups made
by commiter. Fix. (NB: any errors here are again due to paul).
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
* zebra_rib.c: (rib_process) convert to new workqueue specs and
shut up gcc, which complains about cast from void via
function parameters, for some dumb reason. Do the cast
inside the function instead.
(rib_queue_qnode_del) ditto.
(rib_queue_init) no need for the casts anymore.
* zebra_rib.c: (static_uninstall_ipv{4,6}) Fix regression wrt
removal of static routes with multiple-hops introduced with
the workqueue conversion. We should free the relevant
nexthop and then get rib_process to run, otherwise we just
get same static route back again (with no way to unconfigure
it, because its already deleted from configuration).
rib_add_ipv6() function so that IPv6 routes in RIB can have correct
metric. No IPv6 routing daemon uses distance yet though.
* zserv.c, connected.c, kernel_socket.c, rt_netlink.c,
rtread_proc.c,zserv.c: Pass metric and distance info to the
rib_add_ipv6().
Forwardport from stable branch.
* (global) Extern and static'ification, with related fixups
of declarations, ensuring files include their own headers, etc.
if_ioctl.c: (interface_info_ioctl) fix obvious arg mis-order in
list loop
* rib.h: (struct rib) Add lock field for refcounting.
* zserv.h: (struct zebra_t) Add a ribq workqueue to the zebra
'master' struct.
* zserv.c: (zread_ipv4_add) XMALLOC then memset should be XCALLOC.
* zebra_rib.c: Clean up refcounting of route_node, make struct rib
refcounted and convert rib_process to work-queue. In general,
rib's should be rib_addnode'd and delnode'd to route_nodes, and
these symmetrical functions will manage the locking of referenced
route_node and freeing of struct rib - rather than having users
manage each seperately - with much scope for bugs..
(newrib_free) removed and replaced with rib_lock
(rib_lock) new function, check state of lock and increment.
(rib_unlock) new function, check lock state and decrement. Free
struct rib if refcount hits 0, freeing struct nexthop's, as
newrib_free did.
(rib_addnode) Add RIB to route_node, locking both.
(rib_delnode) Delete RIB from route_node, unlocking each.
(rib_process) Converted to a work-queue work function.
Functional changes are minimal, just arguments, comments and
whitespace.
(rib_queue_add_qnode) Helper function to setup a ribq item.
(rib_queue_add) Helper function, same arguments as old
rib_process, to replace in callers of rib_process.
(rib_queue_qnode_del) ribq deconstructor.
(rib_queue_init) Create the ribq.
(rib_init) call rib_queue_init.
(remainder) Sanitise refcounting of route_node's. Convert to
rib_queue_add, rib_addnode and rib_delnode. Change XMALLOC/memset
to XCALLOC. Remove calls to nexthop_delete and nexthop_free.
* (global) update all c files to match the lib/vector.h rename of
(struct vector).active to max, and vector_max macro to
vector_active.
* lib/vector.h: Rename to (struct vector).max to slightly less
confusing active, for the number of active slots, distinct from
allocated or active-and-not-empty. Rename vector_max to
vector_active for same reason.
- add privs support
- use misc quagga's definitions
- make it compile"able"
- fix segfault cases related to hostname()
- add debug isis xxx command
This patch has been approved by Paul Jakma.
* zebra/zebra_rib.c: Revert patch (dating from zebra.org) which
caused zebra to read all routes in all tables, rather than just
the main table. See [quagga-dev 280].
* zebra/zebra_rib.c: (nexthop_active_update) Check for multipath
limit when setting changed flag to avoid spurious changes.
(static_install_ipv{4,6}) dont uninstall by default, might not be
required - avoid spurious uninstalls.
(static_uninstall_ipv{4,6}) only uninstall the route if its
actually FIB route.
* zebra/zebra_rib.c: Fix possible dangling reference to rib
route_nodes - unlock it the appropriate number of times. (twice,
because of the implicit lock). see [quagga-dev 251].
* lib/version.h: add ZEBRA_URL (unused for now)
* lib/vty.c: CMD_ERR_NOTHING_TODO when reading conf file should not
be fatal. slight reformating.
* ospfd/ospf_zebra.c: ignore reject/blackhole routes if zebra sends
these type of routes. probably should be a new type of route to
allow daemons to more easily choose whether to redistribute them
- rathen than just a flag (eg for reject/blackhole).
reorder the is_prefix_default test for ZEBRA_IPV4_ROUTE_DELETE to
avoid the inverted test - slightly more readable.
* redhat/zebra.spec.in: Add ospfapi port to services file, if
with_ospfapi.
* zebra/rib.h: Change nexthop types to an enum.
* zebra/rt_netlink.c: run it through indent -nut.
Add nexthop_types_desc[] descriptive array for nexthop types.
(netlink_route_multipath) debug statements indicate which branch
they are in and print out nexthop type.
* zebra/zebra_rib.c: slight reformatting.
* zebra/zebra_vty.c: Pass ZEBRA_FLAG_BLACKHOLE flag to
static_add_ipv4() if Null0 route is configured. print out Null0 if
STATIC_IPV4_BLACKHOLE route, and ignore flags (shouldnt be
possible to set flags from vty) for config and show route.
* zebra/rt_netlink.c: Debug statements added to
netlink_route_multipath()
* zebra/zebra_rib.c: If route has a gateway, delete only existing
route with that specified gateway.
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global,
pass the thread master in explicitly to vty_init. Sort out some
header dependency problems with lib/command.h
* zebra/: Move globals to struct zebrad. Update vty_init().
* (.*)/\1_main.c: update call to vty_init().
Subject: [zebra 19084] Re: suspected memory leakage upon static route
I believe this is a more complete patch, it also addresses
allocating/freeing of nexthop->ifname string buffer (1) using
XSTRDUP/XFREE macros (thus correctly updating memory statistics), and
(2) for all nexthop->type cases that carry an ifname string.
Subject: [zebra 19080] suspected memory leakage upon static route deletion
upon deletion of a static route entry, at the end of
zebra/zebra_rib.c/static_delete_ipv4(), there's a call to XFREE to
deallocate the 'struct static_ipv4'. However, in the case of a static with
ifname as nexthop (type==STATIC_IPV4_IFNAME), this struct holds a pointer to
a dynamically allocated ifname string buffer (si->gate.ifname, see its
allocation within static_add_ipv4() using XSTRDUP). IMO, the attached patch
is required.
Notes: the same applies to IPv6 statics as well (fix included in patch);
and, I admit I haven't yet tested that, but it seems simple enough to be
working... ;->
