External libraries can re-enter the FRR code through a hook function. A
crash occurs when logging from this hook function if the library has
initiated a new pthread, as the FRR RCU context is not initialized for
this thread.
Add frr_pthread_non_controlled_startup() function to initialize a valid
RCU context within a FRR pthread context, originating from an external
pthread.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
It's unlikely that an operator will ever set a fd
limit of over 100k. Let's warn the operator that
things are in a bit of a wonky state.
Fixes: #15280
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Remove operational data check from CLI command. It never works in mgmtd
and it is not needed in backend daemons because it's done in
`lib_vrf_destroy` callback.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, staticd configuration is tightly coupled with VRF existence.
Because of that, it has to use a hack in NB infrastructure to create a
VRF configuration when at least one static route is configured for this
VRF. This hack is incompatible with mgmtd, because mgmtd doesn't execute
configuration callbacks. Because of that, the configuration may become
out of sync between mgmtd and staticd. There are two main cases:
1. Create static route in a VRF. The VRF data node will be created
automatically in staticd by the NB hack, but not in mgmtd.
2. Delete VRF which has some static routes configured. The static route
configuration will be deleted from staticd by the NB hack, but not
from mgmtd.
To fix the problem, decouple configuration of static routes from VRF
configuration. Now it is possible to configure static routes even if the
VRF doesn't exist yet. Once the VRF is created, staticd applies all the
preconfigured routes.
This change also fixes the problem with static routes being preserved in
the system when staticd "control-plane-protocol" container is deleted
but the VRF is still configured.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When interface is not set in "ip route" command, CLI passes "(null)" as
an interface name instead of an empty string. The actual code in turn
uses "nh->ifname[0] != 0" to check if the interface name was set. Fix
the problem by changing the "(null)" string into an empty string when
populating the nexthop structure.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This reverts commit 76b2bc97e7.
This change is wrong for several reasons:
- it is backwards incompatible - previously it was always possible to
create blackhole/reject routes using shortened versions of the words
and it suddenly became impossible if there's an interface in the
system with the same name
- it uses operational data for validation which is prohibited
- it doesn't really solve the problem with inability to create routes
using interface names like `bla` or `rej`
Create a single registry of default port values that daemons
are using. Most of these are vty ports, but there are some
others for features like ospfapi and zebra FPM.
Signed-off-by: Mark Stapp <mjs@labn.net>
Structure size of bgp_path_info_extra when compiled
with vnc is 184 bytes. Reduce this size to 72 bytes
when compiled w/ vnc but not necessarily turned
on vnc.
With 2 full bgp feeds this saves aproximately 100mb
when compiling with vnc and not using vnc.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
pahole reports that the hash_bucket has 2 4 byte holes
in the data structure. Let's reorganize this a bit
and save 8 bytes per hash_bucket instance.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add tests in bgp_vrf_route_leak_basic topotest to check that route
leaking from the default VRF results in an operational route.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add a test in bgp_vrf_route_leak_basic topotest to check that route
leaking from a non existing VRF results in an inactive route.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Update bgp_vrf_route_leak_basic to set up the VRF interfaces. Otherwise
the routes to the VRF interface are inactives.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Previously, routes leaked from one VRF to another VRF were associated
with the original nexthop interface.
Due to this change, the `bgp_srv6l3vpn_route_leak` topotest always fails
because it still expects the nexthop interface.
This commit fixes the expected interface name in the
`bgp_srv6l3vpn_route_leak` topotest.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Leaked connected routes have now the following nexthop interfaces:
- lo for routes imported from the default VRF
- or the VRF interface for routes imported from the other VRFs.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Leaked routes from prefixes defined with 'network <prefix>' are inactive
because they have no valid nexthop interface.
> vrf r1-cust1
> ip route 172.16.29.0/24 192.168.1.2
> router bgp 5227 vrf r1-cust1
> no bgp network import-check
> address-family ipv4 unicast
> network 172.16.29.0/24
> rd vpn export 10:1
> rt vpn import 52:100
> rt vpn export 52:101
> export vpn
> import vpn
> exit-address-family
> exit
> !
> router bgp 5227 vrf r1-cust4
> bgp router-id 192.168.1.1
> !
> address-family ipv4 unicast
> network 192.0.2/24
> rd vpn export 10:1
> rt vpn import 52:101
> rt vpn export 52:100
> export vpn
> import vpn
> exit-address-family
> exit
Extract from the routing table:
> VRF r1-cust1:
> S>* 172.16.29.0/24 [1/0] via 192.168.1.2, r1-eth4, weight 1, 00:47:53
>
> VRF r1-cust4:
> B 172.16.29.0/24 [20/0] is directly connected, unknown (vrf r1-cust1) inactive, weight 1, 00:03:40
Routes imported through the "network" command, as opposed to those
redistributed from the routing table, do not associate with any specific
interface.
When leaking prefix from other VRFs, if the route was imported from the
network statement (ie. static sub-type), set nh_ifindex to the index of
the VRF master interface of the incoming BGP instance.
The result is:
> VRF r1-cust4:
> B>* 172.16.29.0/24 [20/0] is directly connected, r1-cust1 (vrf r1-cust1), weight 1, 00:00:08
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
It allows people not familiar with libyang and FRR internals to use
mgmtd FE API by looking only at `mgmt_msg_native.h` header. We still use
the same values to avoid a lot of mapping code, and ensure that any
change doesn't slip unnoticed by using static asserts.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We don't need to create an actual tree to print an empty tree, libyang
handles NULL just fine. The actual problem is that `yang_dnode_new`
creates a tree by validating it, and the validation creates all implicit
default nodes. Therefore, when called with "with-default" flags, instead
of getting an empty tree, we get a tree with all top-level default set.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
