Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem Statement:
==================
RFC 7166 support for OSPF6 in FRR code.
RCA:
====
This feature is newly supported in FRR
Fix:
====
Core functionality implemented in previous commit is
stitched with rest of ospf6 code as part of this commit.
Risk:
=====
Low risk
Tests Executed:
===============
Have executed the combination of commands.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Add the ability to specify the router-id/area-id when deleting the debug
ospf6 configuration.
The new commands are as follow:
no debug ospf6 border-routers router-id [A.B.C.D]
no debug ospf6 border-routers area-id [A.B.C.D]
Update the doc as well.
Signed-off-by: Ahmad Caracalli <ahmad.caracalli@6wind.com>
Problem Statement:
Multiple struct compare using memcmp, which might result in issue due to
structure padding/alignment.
Fix:
The code changes involve structure member by member comparison to
remove any issues related to padding/alignment.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
(cherry picked from commit 67db821a1d6d68b19862d50b68ed19278c5f2422)
When looking up the o_path->ls_prefix if it is not found
the debug statement was using a buf that was never initialized.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
RFC 5187 specifies the Graceful Restart enhancement to the OSPFv3
routing protocol. This commit implements support for the GR
restarting mode.
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ipv6
ospf` EXEC-level command needs to be issued before restarting the
ospf6d daemon (there's no specific requirement on how the daemon
should be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospf6d is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The route linked list in ospf6d is ordered in prefix batches which
are associated with a the route node denoting the prefix. So if
you look up the prefix in the tree and start walking the list, if you
find a prefix which differs from the one you are interested in then
you have gone beyond the batch of routes for that prefix.
In some cases the route database linked list is used on a per-prefix
basis. The existing code simply does a continue when the prefix does
not match and continues to walk. This works with small numbers of
routes because the walk continues through unrelated prefix batches and
never finds anything to operate on. However if we have many thousands
of routes these walks become expensive and can cause the SPF thread
(amongst others) to run very long, causing issues with adjacencies
where the dead timer is short.
Add a break to these prefix-based loops to exit early if we get a
prefix mismatch to avoid continuing down the route list if we have
overshot.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Prefix options are per-prefix, not per-path. As evident by the fact
that the field is never used on ECMP paths. Move it where it belongs.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The logging in ospf6 is very verbose. If you turn on logging on a scaled
system you get too many logs. The problem is that there are some errors
that occur that are hidden behind the debug flags, and to see these errors
we currently need to turn on the debug logging. This change converts these
error logs to warnings and removes the debug flags.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
The ospf6_is_router_abr is checking to see if ospfv3 is an abr router
and also setting values. Let's rename it too `ospf6_check_and_set_router_abr`
to more accurately reflect what it is doing.
Additionally fix coverity #1505176 where we were not checking the return
value of ospf6_is_router_abr like we did every other time. In this
case we don't care about the return value so indicate that we do not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The following is implemented.
1. Configuring area as NSSA.
2. Generating Type 7 LSA.
3. Conversion of Type 7 to Type 5 ( Default Behavior).
4. NSSA ABR selection.
Reviewed-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Co-authored-by: Kaushik <kaushiknath.null@gmail.com>
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Kaushik <kaushiknath.null@gmail.com>
The code had no limits on addresses configured on an interface running
ospf6d. The code would crash when more than 100 addresses were added.
This change limits the number of interface address to 100 if mtu is set
to the default value. If the mtu is set to a jumbo packet size or larger
we will support 200 interface addresses.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
When an "export-filter" or "filter-list out" was configured on an area the
filter was not applied to existing database. The user would either have
to restart the neighboring router in the other area or issue a "clear ipv6
ospf6 interface" to cause the neighbor router to resend it's LSAs. The
new filter would then be applied to these LSAs and permit or deny summary
LSAs from being added/removed from the database. The code now applies the
filters to the existing database without user needing to take any action
to clear ospfv3 adjacencies.
The second part of the problem was if a rule changed the updated filter was
not applied. The code has been modifed to now process the rule update and
reapply the filter.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Issue: When a path in the inter area ecmp route is deleted, the route is removed
Fix: The fix is to remove the specific path from the inter area route using
ospf6_abr_old_route_remove() when abr route entry is not found.
In the function ospf6_abr_old_route_remove() the path to be removed needs
to match adv router and link state ID
Fixed memory leak in ospf6_intra_prefix_update_route_origin() caused by
route node lock not getting released.
Signed-off-by: kssoman <somanks@gmail.com>
Make return values for lh_get_prefix_str LSA handlers consistent, i.e.
return NULL in case of error without having written to the passed buffer
and non-NULL (address of buffer) if a string was written to the buffer.
Previously, it was possible in certain cases (bogus LSAs) to not initialize
(and 0-terminate) the buffer but still return non-NULL, causing the caller
to print random junk.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Check whether full struct ospf6_router_lsdesc/ospf6_prefix is accessible
before accessing its contents. Previously, we only checked for the first
byte in ospf6_router_lsa_get_nbr_id() or not even that (due to an additional
off-by-one error) in ospf6_link_lsa_get_prefix_str() and
ospf6_intra_prefix_lsa_get_prefix_str().
Also check *before* accessing the first prefix instead of starting the
checks only at the 2nd prefix.
The previous code could cause out-of-bounds accesses with valid LSAs in case
of ospf6_link_lsa_get_prefix_str() and
ospf6_intra_prefix_lsa_get_prefix_str() and with specially crafted LSAs
(bad length field) in case of ospf6_router_lsa_get_nbr_id().
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Some prefixes were not shown in the link database
show command, due to issues with pointer calculation.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Some prefixes were not shown in the intra-prefix database
show command, due to issues with pointer calculation.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
1. All the changes are related to handle ospf6 with different vrf.
2. The dependancy of global ospf6 is removed.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>
Signed-off-by: harios_niral <hari@niralnetworks.com>
Issue: When ospfv3 is configured on interface between routers in different network,
the intra area route for the remote connected prefix is not installed in ospf
route table and zebra
Fix: When the advertising router is directly connected but in different network
the interface lookup in the intra area lsa processing does not provide
the matching interface and valid nexthop. Therefore the nexthop is
copied from the link state entry which contains valid
ifindex required for installing the route.
Signed-off-by: kssoman <somanks@gmail.com>
