until now, the assumption was done in bgp flowspec code that the
information contained was an ipv4 flowspec prefix. now that it is
possible to handle ipv4 or ipv6 flowspec prefixes, that information is
stored in prefix_flowspec attribute. Also, some unlocking is done in
order to process ipv4 and ipv6 flowspec entries.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
While checking my BGP debugging settings at the console, I noticed
this message was missing a newline. Add it to be consistent with the
other similar messages.
Signed-off-by: Russell Bryant <rbryant@redhat.com>
when a plugin is attached, some debugs may be attached to that plugin.
For that, add one hook that is interacting with vty: a boolean indicates
what the usage is for: either for impacting the 'show running-config',
or for impacting the 'show debugging' command.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Defer the grabbing of the prefix for as long as is possible.
This is a long term rework of how we access the `struct bgp_node`
to only use accessor functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
* Added FSM for peer and global configuration for graceful restart
* Added debug option BGP_GRACEFUL_RESTART for logs specific to
graceful restart processing
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Executed some evpn related tests with valgrind and saw some errors
related to uninitialized memory and overlapping memcpy. This commit
fixes those.
Ticket: CM-21218
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8249
Adding EVPN prefix of Type 2, 3 and 5 routes to bgp updates
prefix filters.
Ticket:CM-14476
Testing Done:
Configure multiple evpn options under 'debug bgp updates prefix'.
Below is the running-config output.
MAC-IP route with just MAC:
debug bgp updates prefix l2vpn evpn type macip mac
00:02:00:0a:0a:0a
MAC-IP route with MAC and IP:
debug bgp updates prefix l2vpn evpn type macip mac
00:02:00:00:00:0c ip 45.0.1.9
MAC-IP route with just MAC and IPv6:
debug bgp updates prefix l2vpn evpn type
macip mac 00:02:00:00:00:0a ip 2001:fee1:0:1::8
Type-3:
debug bgp updates prefix l2vpn evpn type multicast ip 27.0.1.19
Type-5:
debug bgp updates prefix l2vpn evpn type prefix
ip 2060:1:1:1::/64
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Added following vty command:
[no] debug bgp pbr error
This permits dumping on the logs some errors related to PBR.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This command is used to troubleshoot the routes that are installed inbgp
pbr fib, before being injected in zebra.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
MPLS label pool backed by allocations from the zebra label manager.
A caller requests a label (e.g., in support of an "auto" label
specification in the CLI) via lp_get(), supplying a unique ID and
a callback function. The callback function is invoked at a later
time with the unique ID and a label value to inform the requestor
of the assigned label.
Requestors may release their labels back to the pool via lp_release().
The label pool is stocked with labels allocated by the zebra label
manager. The interaction with zebra is asynchronous so that bgpd
is not blocked while awaiting a label allocation from zebra.
The label pool implementation allows for bgpd operation before (or
without) zebra, and gracefully handles loss and reconnection of
zebra. Of course, before initial connection with zebra, no labels
are assigned to requestors. If the zebra connection is lost and
regained, callbacks to requestors will invalidate old assignments
and then assign new labels.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
The json format is returd when requested from the two commands:
- show bgp ipv4 flowspec
- show bgp ipv4 flowspec detail
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It is possible to enhance debug bgp flowspec feature by using vty
command. This command, if enabled, will dump the match/set couple of
information received on NLRI.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Received PMSI tunnel attributes (in EVPN type-3 route) were not recognized.
Parse them and display the tunnel type when looking at routes. Note that
the only tunnel type currently supported is ingress replication (IR). A
warning message will be logged if the received tunnel type is something
else, but the attribute is otherwise ignored.
Updates: a21bd7a (bgpd: add PMSI_TUNNEL_ATTRIBUTE to EVPN IMET routes)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Building a communities json object every time is
both expensive and memory wasteful. Modify
code to only build the json object when needed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
You could configure something bogus like "debug bgp updates prefix
10.1.1.1/16", this needs to be converted to "10.1.0.0/16"
Since we don't actually have a BGP context until we enter into the
`router bgp` node, debugging commands which use DECLVAR before that
happens will fail. This is just `no debug bgp` and `no debug bgp
updates`. Instead just iterate over all bgp instances and do the deed.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Most of the attributes in 'struct attr_extra' allow for
the more interesting cases of using bgp. The extra
overhead of managing it will induce errors as we add
more attributes and the extra memory overhead is
negligible on anything but full bgp feeds.
Additionally this greatly simplifies the code for
the handling of data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
bgpd: Fix missing label set
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
(This was intended as further demonstration of the DEFPY code, but it
might as well go into the tree.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Originally we used the 'peer' parameter for this:
if (peer_sort (peer) == BGP_PEER_IBGP)
snprintf (buf + strlen (buf), size - strlen (buf), ", localpref %d",
attr->local_pref);
Now we have this:
if (CHECK_FLAG (attr->flag, ATTR_FLAG_BIT (BGP_ATTR_LOCAL_PREF)))
snprintf (buf + strlen (buf), size - strlen (buf), ", localpref %u",
attr->local_pref);
Remove the now useless 'peer' parameter.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
The initial implementation was against draft-keyupate-idr-bgp-prefix-sid-02
This updates our label-index implementation up to draft-ietf-idr-bgp-prefix-sid-05
- changed BGP_ATTR_LABEL_INDEX to BGP_ATTR_PREFIX_SID
- since there are multiple TLVs in BGP_ATTR_PREFIX_SID you can no longer
rely on that flag to know if there is a label-index for the path. I
changed bgp_attr_extra_new() to init the label_index to
BGP_INVALID_LABEL_INDEX
- put some placeholder code in for the other two TLVs (IPv6 and
Originator SRGB)
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
The define is added in order to be reused, when one wants to display
addpath identifier as a string with some comment.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It seems these two were at some point copied in from rsync; replace with
more recent versions that will hopefully become available in glibc as
well.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
lib/zebra.h has FILTER_X #define's. These do not belong there.
Put them in lib/filter.h where they belong.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 0490729cc033a3483fc6b0ed45085ee249cac779)
While processing references to the macro PEERAF_FOREACH(), aggressive loop
optimization by gcc 4.9.x (probably 4.8 and greater) was resulting in the
generated code not checking on the index as well as eliminating some code.
This was leading to a dereference of invalid memory when a BGP peer came up.
The fix is to scrap this convoluted macro. Two other changes done are to
eliminate overloading of "afindex" and make the loop iterator an integer.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Dave Olson <olson@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-8889
Reviewed By: CCR-4018
Testing Done: Verified failure scenario
Note: This code was added as part of update-groups implementation; when
upstreaming update-groups, this patch should also be included.
will be deprecated in the future
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-8144
As part of the debian build process for jessie we are seeing
some compile issues. This addresses these issues
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7439
Reviewed By: Donald Sharp
Testing Done:
If a session was reset due to a NOTIFICATION the "show ip bgp
neighbor" output would not display details on what the
notification actually was. This patch changes that. Example:
superm-redxp-05# show ip bgp neighbors 20.1.2.2
BGP neighbor is 20.1.2.2, remote AS 21, local AS 10, external link
[snip]
Last reset 01:05:07, due to NOTIFICATION sent (OPEN Message Error/Bad Peer AS)
This patch adds a hostname capability. The node's hostname and
domainname are exchanged in the new capability and used in show command
outputs based on a knob enabled by the user. The hostname and domainname
can be a maximum of 64 chars long, each.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Ticket: CM-5660
Reviewed By: CCR-2563
Testing Done:
Ticket: CM-7177
Reviewed-by: CCR-3396
Testing: See bug
This code change does several small things:
(A) Fix a couple detected memory leaks
(B) Fix all malloc operations to use the correct XMALLOC operation in bgpd and parts of lib
(C) Adds a few new memory types to make it easier to detect issues
bgpd: Exchange hostname capability and display hostnames in outputs
This patch adds a hostname capability. The node's hostname and
domainname are exchanged in the new capability and used in show command
outputs based on a knob enabled by the user. The hostname and domainname
can be a maximum of 64 chars long, each.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
