There exist systems that do not explicity have a python soft-link
on their system. Let's explicity call out which python we want
to be using with exabgp.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
For IPv4 matching, we have "match ip next-hop address A.B.C.D".
For IPv6 matching, we have "match ipv6 next-hop X:X::X:X".
To have consistency, let's add "address" keyword to IPv6 commands.
Old commands are preserved as hidden for backward compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The bgp gr topotests had run times that were greater than 10 minutes each.
Just brute force break up the tests to 4 different sub parts.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
When changing the area from normal to NSSA, previous area's
ASBR router's type-5 also calculated and added to routing table along
with Type-7 lsas.
Made a change in route calculation such that it will not consider Type-5
lsas in calculation if it is originated from NSSA ASBR router.
These lsas will be age out at MAX age.
log:
frr(config-router)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
K>* 0.0.0.0/0 [0/0] via 10.112.157.253, ens160, 00:32:47
C>* 10.112.156.0/23 is directly connected, ens160, 00:32:47
S>* 22.22.22.2/32 [1/0] is directly connected, ens192, weight 1, 00:20:03
O>* 33.33.33.0/24 [110/20] via 100.1.1.220, ens192, weight 1, 00:08:55
via 100.1.1.220, ens192, weight 1, 00:08:55
O 100.1.1.0/24 [110/10] is directly connected, ens192, weight 1, 00:21:32
C>* 100.1.1.0/24 is directly connected, ens192, 00:23:11
frr(config-router)# do show ip ospf route
============ OSPF network routing table ============
N 100.1.1.0/24 [10] area: 0.0.0.1
directly attached to ens192
============ OSPF router routing table =============
R 2.2.2.2 [10] area: 0.0.0.1, ASBR
via 100.1.1.220, ens192
============ OSPF external routing table ===========
N E2 33.33.33.0/24 [10/20] tag: 0
via 100.1.1.220, ens192
via 100.1.1.220, ens192
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Problem Statement:
==================
on rp_change, PIM processes all the upstream in a loop and for selected
upstreams PIM has to send join/prune based on the RPF changed.
join and prune packets are not getting aggregated in a single packet.
Root Cause Analysis:
====================
on pim_rp_change pim_upstream_update() gets called for selected upstreams.
This API calculates to whom it has to send join and to whom it has to
send prune via API pim_zebra_upstream_rpf_changed(). This API peprares
the upstream_switch_list list per interface and inserts the group and
sources.
Now PIM is still in the pim_upstream_update() API context, i.e PIM
is still processing the same upstream. In the last there is a
call to pim_zebra_update_all_interfaces() which processes the
upstream_switch_list list, sends the packets out and clears the list.
Fix:
====
Don't process the upstream_switch_list in the upstream context.
process all the upstreams prepare the upstream_switch_list and then
process in one go. This will club all the S,G entries.
It also saves list cleanup with respect to memory allocation and
deallocation multiple times.
Signed-off-by: Vishal Dhingra <rac.vishaldhingra@gmail.com>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Description:
- Changing the expected output for selected route in the script.
- With our changes for VRF-Lite fix best path selection,
during best path selection, while comparing the paths for imported routes,
we should correctly refer to the original route i.e. the ultimate path.
In this case, when we have ibgp route and imported ibgp route
for the same prefix, we do compare IGP metric which is same for both,
So we proceed to comparing router-ids and selecting the best path.
- Before our changes, ibgp route was preferred because of IGP metric.
With our fix, expected output for selected route is changed to
imported ibgp route because of the lower router-id.
- Corresponding changes for expected advertised route and
the large community are made.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Description:
EVPN routes marked as imported routes,
having bgp path info's extra, where as
they are not truly imported routes,
so original bgp info will be null.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Description:
Added a macro which optimises some part of the code.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Description:
Incorrect behavior during best path selection for the imported routes.
Imported routes are always treated as eBGP routes.
Change is intended for fixing the issues related to
bgp best path selection for leaked routes:
- FRR does ecmp for the imported routes,
even without any ecmp related config.
If the same prefix is imported from two different VRFs,
then we configure the route with ecmp even without
any ecmp related config.
- Locally imported routes are preferred over imported
eBGP routes.
If there is a local route and eBGP learned route
for the same prefix, if we import both the routes,
imported local route is selected as best path.
- Same route is imported from multiple tenant VRFs,
both imported routes point to the same VRF in nexthop.
- When the same route with same nexthop in two different VRFs
is imported from those two VRFs, route is not installed as ecmp,
even though we had ecmp config.
- During best path selection, while comparing the paths for imported routes,
we should correctly refer to the original route i.e. the ultimate path.
- When the same route is imported from multiple VRF,
use the correct VRF while installing in the FIB.
- When same route is imported from two different tenant VRFs,
while comparing bgp path info as part of bgp best path selection,
we should ideally also compare corresponding VRFs.
See-also: https://github.com/FRRouting/frr/files/7169555/FRR.and.Cisco.VRF-Lite.Behaviour.pdf
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
the fix consists in parsing the ext community list ipv6 by taking
account the size of the ecommunity val size.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
During zebra shutdown, we clear out the LSP workqueue. The LSPs
will be uninstalled and freed during the shutdown process, so
just ignore any LSPs that happen to be on the workqueue.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
`pim_ifchannel_ifjoin_switch()` changes flags that `pim_forward_stop()`
looks at. This leads to data flow continuing until we have some reason
to sync state again.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(This is mostly just to exercise the code, the actual replacement needs
to be a cocci script.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... these should probably have been added ages ago.
`json_object_string_addf(json, "key", "%pFX", prefix)` is super useful.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... this is copypasted all over the codebase & should've been a helper
to begin with really.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Somewhere along the line core-files stopped being generated
with the running of the topotests. With this change we now
see this:
sharpd@eva /t/topotests> find . -name '*.dmp' -print
./ospfv3_basic_functionality.test_ospfv3_asbr_summary_topo1/r0/ospf6d_core-sig_6-pid_430478.dmp
sharpd@eva /t/topotests> sudo gdb /usr/lib/frr/ospf6d ./ospfv3_basic_functionality.test_ospfv3_asbr_summary_topo1/r0/ospf6d_core-sig_6-pid_430478.dmp
GNU gdb (Debian 10.1-1.7) 10.1.90.20210103-git
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/lib/frr/ospf6d...
[New LWP 430478]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospf6d --log file:ospf6d.log --log-level debug -d'.
Program terminated with signal SIGABRT, Aborted.
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) bt
(gdb)
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
