We should never pass pointers to local variables to thread_add_* family.
When an event is executed, the library writes into this pointer, which
means it writes into some random memory on a stack.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
frrmod_load() attempts to dlopen() several possible paths
(constructed from its basename argument) until one succeeds.
Each dlopen() attempt may fail for a different reason, and
the important one might not be the last one. Example:
dlopen(a/foo): file not found
dlopen(b/foo): symbol "bar" missing
dlopen(c/foo): file not found
Previous code reported only the most recent error. Now frrmod_load()
describes each dlopen() failure.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
If LDP is miss configured in a setup and the router has LSPs with no remote
label, this code installs the LSP with a pop instruction of the top-level
label so the packet can be forwarded using IP. This is a best-effort
attempt to deliver labeled IP packets to their final destination instead of
dropping them. If this config is turned off the code will only install
LSPs that have a valid remote label.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Add support for read-only snmp mib objects as described in RFC 3815,
excluding statistics.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
Add an API that allows IGP client daemons to register/unregister
RLFAs with ldpd.
IGP daemons need to be able to query the LDP labels needed by RLFAs
and monitor label updates that might affect those RLFAs. This is
similar to the NHT mechanism used by bgpd to resolve and monitor
recursive nexthops.
This API is based on the following ZAPI opaque messages:
* LDP_RLFA_REGISTER: used by IGP daemons to register an RLFA with ldpd.
* LDP_RLFA_UNREGISTER_ALL: used by IGP daemons to unregister all of
their RLFAs with ldpd.
* LDP_RLFA_LABELS: used by ldpd to send RLFA labels to the registered
clients.
For each RLFA, ldpd needs to return the following labels:
* Outer label(s): the labels advertised by the adjacent routers to
reach the PQ node;
* Inner label: the label advertised by the PQ node to reach the RLFA
destination.
For the inner label, ldpd automatically establishes a targeted
neighborship with the PQ node if one doesn't already exist. For that
to work, the PQ node needs to be configured to accept targeted hello
messages. If that doesn't happen, ldpd doesn't send a response to
the IGP client daemon which in turn won't be able to activate the
previously computed RLFA.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
LDP would mark all routes as learned on a non-ldp interface. Then
when LDP was configured the labels were not updated correctly. This
commit fixes issues 6841 and 6842.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Clean up the temp zlog dirs in /var/tmp/frr/ that the ldpd
child processes were leaving. The child processes do a non-
standard lib init/deinit, so they need to explicitly deinit
the zlog module.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Don't crash when trying to `show running-config` because of missing
filter northbound integration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Changes to ACL rules were not applied to LDP. This fix allows
LDP to be notified when a rule in an ACL filter is modified by
the user. The filter is properly applied to the LDP session.
The filter may cause a LDP session to go down/up or to remove/add
labels being advertised/received from a neighbor.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
Stop sleeping if synchronous label-manager zapi session
has trouble during init: retry using a timer instead. Move
initial label-block request to a point where the LM zapi
session is known to be running. Remove the use of the
daemon 'instance' - we're using the session_id to distinguish
the LM zapi session.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
There is configuration in LDP to only create labels for
host-routes. If the user remove this configuration the code
was not readvertising non-host routes to it's LDP neighbors.
The issue is the same in reverse also. If the user adds this
configuration on an active LDP session the non-host routes were
not withdrawn.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
LDP ordered label distribution control only binds a label to
a FEC if it is the egress LSR, or the router received a label
binding for a FEC from the next hop router. In this mode,
an MPLS router will create a label binding for each FEC and
distribute it to its neighbors so long as he has a entry in
the RIB for the destination.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
The lif variable was being set in the if statement and
immediately copied into from xf. No need to do this
twice.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
LDP opens two sockets to zebra, one through ldpd (always using
instance 0) and another through lde (using whatever instance
was set through the -n command line parameter). If no instance
was set, both connections would use the same protocol and instance,
making it impossible to distinguish them through zserv_find_client.
This meant that a response to a lm connect would erroneously go to
the wrong process. Fix this by having a default instance value of 1,
in case the user does not specify a different one.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
If --ctl_socket is used this will override any other option and will
be used
If -N <namespace> is used, then we will setup the LDPD_SOCKET
in $frr_statedir/<namespace>/ldpd.sock
If neither option is used, then we will use $frr_statedir/ldpd.sock
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A while ago all FRR configuration commands were converted to use the
QOBJ infrastructure to keep track of configuration objects. This
means the configuration lock isn't necessary anymore because the
QOBJ code detects when someones tries to edit a configuration object
that was deleted and react accordingly (log an error and abort the
command). The possibility of accessing dangling pointers doesn't
exist anymore since vty->index was removed.
Summary of the changes:
* remove the configuration lock and the vty_config_lockless() function.
* rename vty_config_unlock() to vty_config_exit() since we need to
clean up a few things when exiting from the configuration mode.
* rename vty_config_lock() to vty_config_enter() to remove code
duplication that existed between the three different "configuration"
commands (terminal, private and exclusive).
Configuration commands converted to the new northbound model don't
need the configuration lock either since the northbound API also
detects when someone tries to edit a configuration object that
doesn't exist anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With commit e94b38d94b5 we are now scheduling the read
of vty config until after the startup of main thread
processing. It now becomes necessary to move the
application of the config until after the read
in of the config from a file if we are using a
non-integrated config.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
