Remove two unused functions in `zebra/rt_socket.c`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit 914fea09d9)
`sockaddr` `len` field is the address type size and not the mask length.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit a6c0003182)
`gate_buf` should be big enough to hold IPv6 addresses and `inet_ntop`
should be run in the correct `sockaddr` struct member.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Debug messages should use `prefix_buf` and `prefix2str` should only be
called once in `kernel_rtm`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We were sending ZEBRA_INTERFACE_LINK_PARAMS messages under the
following circumstances:
* New interface was created (via kernel or config);
* Interface went from down to up;
* Update in the link-params configuration.
Now also send ZEBRA_INTERFACE_LINK_PARAMS messages whenever a zclient
connects and sends a ZEBRA_INTERFACE_ADD request. Without this fix,
the client daemons don't receive interface link parameters if they
are configured in the zebra startup configuration.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
client->ifinfo is a VRF bitmap, hence we need to use
vrf_bitmap_check() to check if a client is subscribed to receive
interface information for a particular VRF. Just checking if
the client->ifinfo value is set will always succeed since it's
a pointer initialized by zserv_client_create(). With this fix,
we'll stop sending interface messages from all VRFs to all clients,
even those that didn't subscribe to it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Future commits are going to introduce more rigor in
state setting in the case of received results from
the data plane. So let us move the DPLANE_OP_ROUTE_DELETE
state check to the same spot as the rest of the code that
is handling a particular operation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the status flag from 8 bits to 32 bits and to add
a few new flags that will be used in future commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the meta_queue insertion such that we only enqueue
the route_node into one meta_queue instead of several.
Suppose we have multiple route_entries associated with
a particular node from rip, bgp, staticd. If we receive a
route update from rip, we would enqueue the route_node into
the 1, 2, 3 meta-nodes. Which means that we would run
the entire process of figuring out a route 3 times, while
nothing would change the second two times.
Modify the code to choose the lowest meta-queue and
install it into that one for processing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a dataplane provider/plugin registers, return the new
handle/object - that's needed to use some provider apis
later on.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Pass lists of results back to zebra from the dataplane subsystem
(and pthread). This helps reduce the lock/unlock cycles when
zebra is busy. Also remove a couple of typedefs that made their
way into the dataplane header file - those violate the FRR style
guidelines.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
if the default vrf name is manually set, by passing -o parameter to
zebra, then this should be detected when walking the list of netns
available in the system. If a netns called vrf0 is present, then it
should be ignored.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when zebra is run, by using vrf netns backend mode, then the parser
detector of netns is run before forcing the default vrf to a possible
value. In that case, there is a possibility that the forced '-o' option
will create a second vrf with same name, whereas this option should be
there to uniquely have a default vrf with a value.
To make things consistent, the forced value will be priorised. Then, the
notifier will attempt to create vrf contexts. The expectation is that
the creation will fail, due to an already present vrf with same name.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When an empty netmask a wrong end size is calculated, lets handle this
corner case to avoid spurious warning messages.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Handle corner case where a warning log message is issued on interface
address netmask handling with sockaddr type AF_LINK: it may come empty
or with match all (all 0xFF).
In the first case all lengths are zero and we only need to copy the
first bytes, second case it comes with a zero index and all 0xFF bytes.
In any case we only need to figure out a few of the first bytes instead
of all data.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When porting routing socket macro data handling to functions, the
attribute function was forgotten. The only difference between the
attribute and address handler is the family type check.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
For neigh check duplicate flag as it can be inherited from
duplicate detected MAC (count could be 0).
Ticket:CM-23316
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Below are cases where EVPN duplicate detection
Freeze and Unfreeze required fixes:
Auto recovery needs to check neighbor's duplicate flag
to take action, as neigh could be marked duplicate
via inherited from MAC where IP detection count could be 0.
MAC duplicate detection needs to set flag to true
if freeze action is configured.
Local MAC add update should not send update to bgp
if MAC is in frozen state.
Remote MAC-IP update should not process neigh update if MAC
is detected as duplicate during remote update.
Ticket:CM-23344
Testing Done:
Trigger duplicate detection via both local and remote update trigger,
Validate clear command and other changes expected behavior.
Auto-recovery takes appropriate action on inherited IPs.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add the ability to retrieve the current role of mlag for this machine.
If mlag is not setup we will always return MLAG_ROLE_NONE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zebra_delete_rnh function is not needed to be exposed
to the entire world. Limit it's scope.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The deletion of a rnh is always proceeded by the same checks
to see if it is done. Just let zebra_delete_rnh do this test.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we call zebra_vrf_table_create, we've already created the info
pointer in zebra_router_get_table, so properly set the info->safi
and just store the zvrf->table[afi][safi] value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When handling events from /var/run/netns folder, if several netns are
removed at the same time, only the first one is deleted in the frr. Fix
this behaviour by applying continue in the loop.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Duplicate address detection should operate
at default vrf instance.
For mac and neigh show command, auto recovery and few places
where tanent vrf_id used for zvrf instead use default
vrf instance. Use vxlan_if's or VRF_DEFAULT vrf_id to
fetch zebra's default vrf instance.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
zebra uses the SIOCETHTOOL ioctl with the ETHTOOL_GSET command to
fetch the speed of interfaces from the kernel. The only problem is
that ETHTOOL_GSET returns EOPNOTSUPP when the given interface is a
virtual interface. This leads to zebra emitting warnings like this
at startup:
ZEBRA: IOCTL failure to read interface lo speed: 95 Operation not supported
ZEBRA: IOCTL failure to read interface dummy0 speed: 95 Operation not supported
ZEBRA: IOCTL failure to read interface ovs-system speed: 95 Operation not supported
Silence these warnings by ignoring EOPNOTSUPP errors, since we know
they are harmless. This is similar to how we handle EINVAL errors
from the BSD SIOCGIFMEDIA ioctl (commit c69f2c1ff).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Unlike the other interface zapi messages, ZEBRA_INTERFACE_VRF_UPDATE
identifies interfaces using ifindexes and not interface names. This
is a problem because zebra always sends ZEBRA_INTERFACE_DOWN
and ZEBRA_INTERFACE_DELETE messages before sending
ZEBRA_INTERFACE_VRF_UPDATE, and the ZEBRA_INTERFACE_DELETE callback
from all daemons set the interface index to IFINDEX_INTERNAL. Hence,
when decoding a ZEBRA_INTERFACE_VRF_UPDATE message, the interface
lookup would always fail since the corresponding interface lost
its ifindex. Example (ospfd):
OSPF: Zebra: Interface[rt1-eth2] state change to down.
OSPF: Zebra: interface delete rt1-eth2 vrf default[0] index 8 flags 11143 metric 0 mtu 1500
OSPF: [EC 100663301] INTERFACE_VRF_UPDATE: Cannot find IF 8 in VRF 0
To fix this problem, use interface names instead of ifindexes to
indentify interfaces like the other interface zapi messages do.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The route_info data structure already had a mapping of route type
to admin distance. Consolidate the meta_queue_map information
into this route_info data structure. This is to reduce the number
of places we need to remember to touch when adding a new routing
protocol.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
