Consolidate the routemap initialization into one
function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
distribute.c doesn't allow to manage both v4 and v6 distribute lists. This
patch fix this problem by having 4 DISTRIBUTE* values in the enumeration instead
of two. The code in all daemons using distribute.c is adapted.
* zclient.c: prefix length on router-id and interface address add
messages not sanity checked. fix.
* */*_zebra.c: Prefix length on zebra route read was not checked, and
clients use it to write to storage. An evil zebra could overflow
client structures by sending overly long prefixlen.
Prompted by discussions with:
Donald Sharp <sharpd@cumulusnetworks.com>
* rip_interface.c: Default for split_horizon_default differed between
rip_interface_new and rip_interface_reset, causing at least some issues
after interface events. See patchwork #604. Fix, and consolidate code.
(rip_interface_{reset,clean}) rename these to 'interface', as that's more
appropriate. Spin the ri specific bodies of these functions out to
rip_interface_{reset,clean} helpers. Factor out the overlaps, so
rip_interface_reset uses rip_interface_clean.
(rip_interface_new) just use rip_interface_reset.
* ripd.h: Update for (rip_interface_{reset,clean})
Reported by xufeng zhang, with a suggested fix on which this commit expands.
See patchwork #604. This commit addresses only the split-horizon
discrepency, issue #2. The other issue they reported, #1, is not addressed,
though suggested fix seems inappropriate.
Cc: xufeng.zhang@windriver.com
Since recently zebra uses only the ZEBRA_REDISTRIBUTE_* messages
to advertise redistributed routes to its clientes. Now the old
ZEBRA_IPV*_ROUTE_* messages are only used for client->zebra communication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Move over to the new allocation counting added in the previous commit.
(This commit is mostly mechanical.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
OpenBSD doesn't support the "ifindex hack" derived from RFC 1724 which
allows an ifindex to be encoded in the imr_interface field (in_addr)
of the ip_mreq structure. OpenBSD also doesn't support the RFC3678
Protocol-Independent socket API extensions, which allows an interface
to be specified by its ifindex. With that said, in OpenBSD we still need
to specify an interface by its IP address. This patch adds an exception
in the multicast sockopt functions to handle this case.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make it easier to see which bits in *_snmp.c are actually referenced
from non-SNMP parts of the code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Added a default log file named /var/log/quagga/Quagga.log to every daemon
to capture log entries if no log file is defined. This also allows the
capture of logged information prior to reading each daemon's config file.
If a log file is defined manually, it will override this default file name.
Ticket: CM-10987
Signed-off-by: Don Slice
Reviewed By: Donald Sharp
Testing Done: Manual testing
Quagga was using a mix of srand/rand and srandom/random.
Consolidate to use srandom/random which are the POSIX
versions of random number generators
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
INCLUDES in configure.ac was not used at all, and INCLUDES in
Makefile.am is supposed to be AM_CPPFLAGS these days.
Reduces warnings spewed during bootstrap/autoreconf.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Greg Troxel <gdt@ir.bbn.com>
Acked-by: Feng Lu <lu.feng@6wind.com>
Acked-by: Paul Jakma <paul@jakma.org>
(cherry picked from commit 237aac56960575f6ad2451ba2796d94bd5ae4b33)
Introduce a new command "[no] allow-ecmp" to enable/disable the
ECMP feature in RIP. By default, ECMP is not allowed.
Once ECMP is disabled, only one route entry can exist in the list.
* rip_zebra.c: adjust a debugging information, which shows the number
of nexthops according to whether ECMP is enabled.
* ripd.c: rip_ecmp_add() will reject the new route if ECMP is not
allowed and some entry already exists.
A new configurable command "allow-ecmp" is added to control
whether ECMP is allowed.
When ECMP is disabled, rip_ecmp_disable() is called to
remove the multiple nexthops.
* ripd.h: Add a new member "ecmp" to "struct rip", indicating whether
ECMP is allowed or not.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 0b74a0a5db7bcf65bf68c44b547b02b1310b5cdb)
* Each node in the routing table is changed into a list, holding
the multiple equal-cost paths.
* If one of the multiple entries gets less-preferred (greater
metric or greater distance), it will be directly deleted instead
of starting a garbage-collection timer for it.
The garbage-collection timer is started only when the last entry
in the list gets INFINITY.
* Some new functions are used to maintain the ECMP list. And hence
rip_rte_process(), rip_redistribute_add() and rip_timeout() are
significantly simplified.
* rip_zebra_ipv4_add() and rip_zebra_ipv4_delete() now can share
the common code. The common part is moved to rip_zebra_ipv4_send().
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit b397cf4f0fc484c5ebfc8a680090055c8e6cbe32)
Conflicts:
ripd/rip_zebra.c
batch-fix all warnings that come up when enabling AgentX SNMP support.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit dfee58f1d41a2e36c7f5f38a3ef5712224131824)
These pre-initialized arrays are not modified.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Feng Lu <lu.feng@6wind.com>
(cherry picked from commit 88d37b902bc8127379d3293b9671aa6a11479c23)
RIP_MAX_RTE is defined in ripd.h as 25 but is in fact the
result of a formula. More over it is not used in the code:
the code itself includes the fomula. This makes it un-clear
for maintenance.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 342a31bfda)
* Remove the old change from '08 to add in PIE arguments at automake level.
Versions of libtool since then know how to deal with -fpie and do the right
thing according to whether its building shared or executable objects.
So just pass '-fpie' as CFLAG and let libtool do its thing.
The connected_lookup_address function should really
be a connected_lookup_prefix function. Refactor
the code to use it.
Ticket: CM-10890
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
