Consolidate the routemap initialization into one
function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* zclient.c: prefix length on router-id and interface address add
messages not sanity checked. fix.
* */*_zebra.c: Prefix length on zebra route read was not checked, and
clients use it to write to storage. An evil zebra could overflow
client structures by sending overly long prefixlen.
Prompted by discussions with:
Donald Sharp <sharpd@cumulusnetworks.com>
Only one of these variables is in fact an interface index...
(this fixes -Werror build.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since recently zebra uses only the ZEBRA_REDISTRIBUTE_* messages
to advertise redistributed routes to its clientes. Now the old
ZEBRA_IPV*_ROUTE_* messages are only used for client->zebra communication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Move over to the new allocation counting added in the previous commit.
(This commit is mostly mechanical.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-12773
- change "as-ext" to "as-external"
- drop "grp-mbr" option, it does not have a handler
- drop "type7" option, it does not have a handler
When sending ancillary data on OpenBSD, we need to tell the compiler
that the ancillary data buffer should be aligned on the stack to the
minimum alignment of the first ancillary data object that will be sent.
Additionally, HAVE_SIN6_SCOPE_ID is not defined anywhere, check for
HAVE_STRUCT_SOCKADDR_IN6_SIN6_SCOPE_ID instead.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make it easier to see which bits in *_snmp.c are actually referenced
from non-SNMP parts of the code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- HAVE_POLL is overloaded by net-snmp
- missing includes
- ospf6_snmp converted to vrf_iflist()
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Added a default log file named /var/log/quagga/Quagga.log to every daemon
to capture log entries if no log file is defined. This also allows the
capture of logged information prior to reading each daemon's config file.
If a log file is defined manually, it will override this default file name.
Ticket: CM-10987
Signed-off-by: Don Slice
Reviewed By: Donald Sharp
Testing Done: Manual testing
Resolved several memory leaks caused by ifdown/ifup the vrf device or
a swp port. For bgp/zebra/ospf/ospf6, bouncing the vrf device would cause
a linked list, Interface, and route-table to get leaked. For ospf6,
bouncing the swp device also caused leaks of Connected and Prefix entries.
Ticket: CM-10841
Signed-off-by: Don Slice
Reviewed-By: Donald Sharp
Testing Done: Manual testing, bgp and ospf mins passed, smokes had fewer failures than base
Ticket: CM-11256
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
Testing: Unit, PTM smoke, OSPF smoke, BGP Smoke
Issue:
BFD client registrations are not being sent to PTM from BGP/OSPF clients when the quagga clients have no BFD configuration. This can create stale BFD sessions in PTM when BFD is removed from quagga configuration before quagga is restarted.
BFD client de-registrations from BGP/OSPF also go missing sometimes when quagga is restarted. This also will cause stale BFD sessions in PTM.
Root Cause:
BFD client registrations were being sent at the time of BGP/OSPF daemon initialization. But, they were being sent to zebra before the socket connection between zebra and BGP/OSPF was established. This causes the missing BFD client registrations.
BFD client de-registrations are sent from zebra when zebra detects socket close for BGP/OSPF daemons. Based on the timing, the de-registrations may happen after socket between PTM and zebra is closed. This will result in missing de-registrations.
Fix:
Moved sending of BFD client registration messages to zebra connected callback to make sure that they are sent after the BGP/OSPF daemons connect with zebra.
Added BFD client de-registrations for BGP/OSPF to be also sent when zebra daemon gets restart signal. They are sent from the signal handler only if it was not already handled in zebra client socket close callback.
Prior to this change, interface bandwidth could not be defined above 10G. With
the use of higher speed interfaces, the ability to effectively define the path
links was highly impacted. Additionally, the default auto-cost reference-bandwidth
for ospf and ospfv3 was set to 100M, which relects a much earlier time. Changed both
the range of interface bandwidth definitions and reference bandwidths to be up to
100G. Set the default interface bandwidth (if not defined) to 10G to make the ratio
continue to cause a cost of 10 as before. Manual testing as well as ospf-min and
ospf-smoke passed successfully.
Ticket: CM-10756
Signed-of-by: Don Slice
Reviewed-by: Donald Sharp
As the comments in if.h, it is better to call ifname2ifindex()
instead of if_nametoindex().
And ifname2ifindex() can work for VRF by appending a parameter
while if_nametoindex() can not.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 395828eea809e8b2b8c5824d3639cefedd7aa9f0)
There are preexisting fields u.lp.id and u.lp.adv_router in struct
prefix that do the same thing as these type-punning pointer derefs.
Use these and shut up the strict-aliasing warnings.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 0de0138a9146074f268245193e45c9376d998722)
Some places, particularly headers, were spewing warnings since they
don't include neccessary other headers to get struct/enum definitions.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 388f8857eb81ef75014060976776523a58a99389)
On higher warning levels, compilers expect %p printf arguments to be
void *. Since format string / argument warnings can be useful
otherwise, let's get rid of this noise by sprinkling casts to void *
over printf calls.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since we can't assume time_t to be long, int, or even long long, this
consistently uses %lld/long long (or %llu/unsigned long long in a few
cases) to print time_t/susecond_t values. This should fix a bunch of
warnings, on NetBSD in particular.
(Unfortunately, there seems to be no "PRId64" style printing macro for
time_t...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit ef008d2f8dc8f7160d8a3d24a15f2fad79ef3242)
Quagga was using a mix of srand/rand and srandom/random.
Consolidate to use srandom/random which are the POSIX
versions of random number generators
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
INCLUDES in configure.ac was not used at all, and INCLUDES in
Makefile.am is supposed to be AM_CPPFLAGS these days.
Reduces warnings spewed during bootstrap/autoreconf.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Greg Troxel <gdt@ir.bbn.com>
Acked-by: Feng Lu <lu.feng@6wind.com>
Acked-by: Paul Jakma <paul@jakma.org>
(cherry picked from commit 237aac56960575f6ad2451ba2796d94bd5ae4b33)
