Note that some of the validation checks that were previously
executed in the code have been moved to the YANG model.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
This is a simple command but with a complex callback, the only
one in isisd which uses the resource allocation API implemented
in the northbound (i.e. the PREPARE phase).
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
These are complex commands to retrofit, partly due to the number of
different callbacks they touch. Additionally, in FRR adding
an interface to an IS-IS area that does not exist also creates that
area. To make sure that this behavior is kept, while at the same
time keeping the northbound api consistent, we need to take extra
care to call the appropriate callbacks to update the YANG tree.
Note that many callbacks rely on the existence of the corresponding
IS-IS area; when these callbacks are joined together in a single
transaction, we need to ensure that the area creation is performed
first, or the config will fail. For this reason, the isis instance
create callback has been given a slightly lower priority than the
others.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
We should update our neighbors list immediately when an adjacency
changes state, not when we run SPF.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Also track when we received an LSP as do not reflood, as well as the
time when we last considered flooding it.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Finding an LSP by its id is useful not only for the
`show isis database` command.
So move it out into its own function to make it reusable.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
We should really populate the neighbor list for the flooding
optimization from our local adjacency database and not from
a one-hop SPF.
If we use SPF, we may end up never exchanging information with
some neighbors since the bidirectional connection check for spf
fails, since LSPs did not get exchanged.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To allow easier debugging of LSP transmission scheduling, add a debug
mode where all tx-queue insertions/deletions are logged.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add a function send_hello_sched so that the logic for scheduling a
hello is not replicated inconsistently into different locations.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This reverts commit 48944eb65e.
We're using GNU C, not ISO C - and this commit triggers new (real)
warnings about {0} instead of bogus ones about {}.
Signed-off-by: David Lamparter <equinox@diac24.net>
A while ago all FRR configuration commands were converted to use the
QOBJ infrastructure to keep track of configuration objects. This
means the configuration lock isn't necessary anymore because the
QOBJ code detects when someones tries to edit a configuration object
that was deleted and react accordingly (log an error and abort the
command). The possibility of accessing dangling pointers doesn't
exist anymore since vty->index was removed.
Summary of the changes:
* remove the configuration lock and the vty_config_lockless() function.
* rename vty_config_unlock() to vty_config_exit() since we need to
clean up a few things when exiting from the configuration mode.
* rename vty_config_lock() to vty_config_enter() to remove code
duplication that existed between the three different "configuration"
commands (terminal, private and exclusive).
Configuration commands converted to the new northbound model don't
need the configuration lock either since the northbound API also
detects when someone tries to edit a configuration object that
doesn't exist anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When we run in non-mt mode, we should consider links which have either
working IPv4 or IPv6 active and look at the neighbors nlpids to judge
wether a link is usable.
Fixes: #3336
We should only update and reflood our own LSPs when the received LSP
is newer than the local copy.
In all other cases, we should simply acknowledge it or resend our own
LSP.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Due to `lsp` getting shadowed, we would send each T0 its own LSP
whenever we actually wanted to flood a different LSP.
Fix this and set -Wshadow=local in my build environment. m(
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When receiving an LSP with same sequence number but different
checksum as in the local database, we would always treat it as
newer than the local LSP.
That behavior is incorrect if the local LSP is indeed a purged
LSP waiting for age-out and the received one is not.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Purged fragments would always be reoriginated by isisd. They
should only be purged once and never be reoriginated.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When `first` would be initialized to the same value as `last`, the
function would return incorrect results.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
It turns out 50ms is actually too short to aggregate all changes
in some cases, so allow for 100ms.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When there is a stream of events coming in, where IS-IS learns
about a lot of updates, IS-IS would regenerate its LSPs before
the updates have been processed completely.
This causes suboptimal convergence because the intermediate state
will be flooded. Only after the configured `lsp_gen_interval`, a
new update with the correct and final state will be generated.
Resolve this by holding off LSP generation while there are still
events coming in.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
lsp_l1_refresh and lsp_l2_refresh are identical apart from the
hardcoded IS-IS level they are referring to. So merge them and
pass the level as part of the argument.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
For debugging the timing of LSP generation, it is useful to know
which event caused a regeneration to be scheduled. Therefore, add
this information to the debug log.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
For debugging the scheduling of SPF, it is useful to see from
where an SPF run is scheduled. So add this information to the
log.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
IS-IS would ignore any area lsp-mtu setting configured after initial
creation of the LSP since move to the new tlv serialized/deserializer.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
isisd would crash when lsp fragments aged out, since they got freed
correctly, but were not removed from LSP0's linked list of fragments.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
rawlspid_print(), which uses a fixed-width 8-byte input, has been replaced with
a call to isis_format_id(), allowing giving the input size.
Signed-off-by: F. Aragon <paco@voltanet.io>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
With this commit, fabricd can run without any IPv4 addresses configured
except on loopback. There are two changes to achieve this:
a) If a circuit has no IPv4 address configured, fabricd will resort to
advertise the routers loopback IP in the OpenFabric hellos.
b) All the routes from OpenFabric are sent with ZEBRA_FLAG_ONLINK set,
so that zebra will install them into the fib without checking whether
the nexthop is reachable
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Have fabricd send out a CSNP whenever a circuit scoped LSP is received,
and log a warning if the CSNP showed resynchronization was necessary.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The OpenFabric draft prescribes that any IS-IS PDUs not needed for
OpenFabric operation MUST be ignored. So this commit makes fabricd
ignore any LAN IIHs and any L1 LSPs.
Also the draft specifies that any reachabilities given as narrow-metric
TLVs SHALL be ignored, so adhere to that too.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Implement RFC 6232, optionally allowing to flood isisd's NET and
hostname in purges it originates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Extend isisd's TLV parser to support the Prefix-SID subtlv as per
draft-ietf-isis-segment-routing-extensions-19
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add a command `debug openfabric flooding` to allow verification of
correct operation of the OpenFabric flooding optimization algorithm.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Regular IS-IS will flood any LSP updates out to all circuits except the
one where it was received on. This is done in `lsp_flood`.
Change `lsp_flood` for fabricd to use the optimized flooding algorithm
instead.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric uses a list of neighbors and neighbors neighbors to calculate
a set of designated reflooders.
While the draft prescribes that these lists should be built whenever an
LSP needs to be flooded, this implementation opted to build them only
when we ran an spf, given that they will only change when the topology
changes.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric requires knowledge of the first two hops on each path
calculated by spf to implement its flooding optimization. Extend the
hopcount-spf to build such a datastructure.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric makes use of flooding scope LSPs to reduce the amount of
reflooding caused by the update process. Implement transmission and
reception of such PDUs.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Before this commit, isisd/fabricd maintained a bitfield for each LSP
to track the SRM bit for each circuit, which specifies whether an LSP
needs to be sent on that circuit. Every second, it would scan over all
LSPs in `lsp_tick` and queue them up for transmission accordingly.
This design has two drawbacks: a) it scales poorly b) it adds
unacceptable latency to the update process: each router takes a random
amount of time between 0 and 1 seconds to forward an update. In a
network with a diamter of 10, it might already take 10 seconds for an
update to traverse the network.
To mitigate this, a new design was chosen. Instead of tracking SRM in a
bitfield, have one tx_queue per circuit and declare that an LSP is in
that queue if and only if it would have SRM set for that circuit.
This way, we can track SRM similarly as we did before, however, on
insertion into the LSP queue, we can add a timer for (re)transmission,
alleviating the need for a periodic scan with LSP tick and reducing the
latency for forwarding of updates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To avoid passing of traffic via leaf nodes in the fabric, OpenFabric
specifies that all links towards tier 0 nodes should be advertised with
a very high metric.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
If an OpenFabric router doesn't have its tier number configured
manually, try to execute the fabric locality calculation algorithm
whenever we have run spf.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
While OpenFabric calculates most tier numbers automatically by the
fabric locality calculation algorithm, that algorithm requires two
systems to be manually configured as tier 0, so it has reference points.
Also, completely manual configuration is possible.
To support this, introduce appropriate CLI commands and flood the
configured information.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To flood the tier calculated by the fabric locality detection,
OpenFabric makes use of TLV 150, defined in
draft-shen-isis-spine-leaf-ext-06, so add support for that TLV.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
By moving the spf datastructures to a header, fabricd can access the
results of the spf run for flooding optimization or fabric locality
calculation.
While this was deemed a sensible choice in this case, when compared with
the option of adding a lot of OpenFabric specific code to isis_spf.c,
the datastructures should still not be accessed randomly all over the
code base. To make this more clear, the new header was called
isis_spf_private.h (Think of a friend class)
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric uses an spf with the metric for all links set to one,
both for flooding optimization and for fabric locality detection.
So extend isisd's spf code to allow running it with such a metric
and have it run whenever normal spf runs.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric changes IS-IS's initial database synchronization. While
regular IS-IS will simultaneuously exchange LSPs with all neighboring
routers during startup, this is considered too much churn for a densely
connected fabric.
To mitigate this, OpenFabric prescribes that a router should only
bring up an adjacency with a single neighbor and perform a full
synchronization with that neighbor, before bringing up further
adjacencies.
This is implemented by having a field `initial_sync_state` in the
fabricd datastructure which tracks whether an initial sync is still
pending, currently in progress, or complete.
When an initial sync is pending, the state will transition to the
in-progress state when the first IIH is received.
During this state, all IIHs from other routers are ignored. Any
IIHs transmitted on any link other than the one to the router with
which we are performing the initial sync will always report the far
end as DOWN in their threeway handshake state, avoiding the formation of
additional adjacencies.
The state will be left if all the SRM and SSN flags on the
initial-sync circuit are cleared (meaning that initial sync has
completed). This is checked in `lsp_tick`. When this condition occurrs,
we progress to the initial-sync-complete state, allowing other
adjacencies to form.
The state can also be left if the initial synchronization is taking too
long to succeed, for whatever reason. In that case, we fall back to the
initial-sync-pending state and will reattempt initial synchronization
with a different neighbor.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric specifies that it should always be run with wide metrics via
P2P links and only as Level-2. Implement this as default and remove all
the knobs from fabricd which allow other configuration.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The 'no ip router isis' command would incorrectly output the afi if the
area to delete does not exist. Make it output the area name instead.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Remove isis_vty.c and create three new files isis_vty_common.c,
isis_vty_fabricd.c and isis_vty_isisd.c which are built into both
daemons, only fabricd and only isisd, respectively.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes multiple issues and inefficiencies regarding the usage of
route_tables in isis_route.c and removes some memory leaks.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Take the source-prefix sub-TLV into consideration when running SPF
and support creation/deletion of dst-src routes as result.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Instead of using the address family to determine which spftree structure
should be used, specify it explicitly. With the advent of ipv6 dst-src
routing, the tree cannot be uniquely determined from the family.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Have an array of spftrees instead of a separate spftree and an
spftree6 for which all the code gets duplicated.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This addresses two issues for L1L2 operation:
a) If an L1 route has ROUTE_ACTIVE unset and an L2 route for the same
destination has ROUTE_ACTIVE set, isisd would still put the L1 route
into the merged table. This causes the route for the destination to
get uninstalled from zebra until the next SPF run, which is incorrect.
To fix this, look at the ROUTE_ACTIVE flag and allow L2 routes to win
against L1 routes, when the L1 has ROUTE_ACTIVE unset.
b) If an L1 route wins against an existing L2 route, the ZEBRA_SYNCED
flag would remain on the L2 route. This leads to the problem that when
the L1 route disappears again, the L2 doesn't get reinstalled, since
isisd assumes it's already in the RIB because ZEBRA_SYNCED is set.
Solve this by clearing ZEBRA_SYNCED on L2 routes, if they lose against
an L1 route.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
There was an off-by-one error in redist_delete, so that routes redistributed
into level-2 could never be withdrawn.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
As isisd's route_tables are directly related to spf trees, move
the route tables into the spftree instead of maintaining them
alongside of the spftrees.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
isisd verifies whether the neighboring IPv4 addresses overlap with its own
unless the interface is running in unnumbered mode. If no overlap is found
and IPv6 is also not enabled, IIHs will be ignored.
Add a debug message for this case, to avoid people wondering why adjacencies
are not coming up.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When isis_sock_init fails in isis_circuit_up, isis_circuit_down would
be called to cancel timers which were scheduled. However
isis_circuit_down would immediately return, since the state had not been
changed to 'UP' yet.
Fix this by having isis_circuit_down always cancel all the timers.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This correction fixes three bugs detected by Clang scan:
Bug Group: Logic error
Bug Type: Dereference of null pointer
File: bgpd/bgp_evpn.c
Function: bgp_evpn_unconfigure_import_rt_for_vrf
Line: 4246
File: isisd/isis_spf.c
Function: isis_print_paths
Line: 69 (two bugs of same type in one line)
Signed-off-by: F. Aragon <paco@voltanet.io>
This correction fixes two bugs detected by Clang scan:
Bug Group: Dead store
Bug Type: Dead assignment
File: zebra/kernel_netlink.c
Function: netlink_parse_extended_ack
Line: 548
Bug Type: Dead increment
File: isisd/isis_lsp.c
Function: lsp_bits2string
Line: 625
Signed-off-by: F. Aragon <paco@voltanet.io>
issue found by cppcheck
[isisd/dict.c:1320] -> [isisd/dict.c:1065]:
(warning) Either the condition '!dn' is redundant or
there is possible null pointer dereference: newnode.
[isisd/dict.c:1320] -> [isisd/dict.c:1068]:
(warning) Either the condition '!dn' is redundant or
there is possible null pointer dereference: newnode.
Signed-off-by: Ilya Shipitsin <chipitsine@gmail.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The circuit->area value is always true in every code path
to isis_circuit_af_set( isis_vty.c ). Therefore was_enabled
will always be true.
If was_enabled ever became false then the area->ip_circuits
and area->ipv6_circuits lines would segfault.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The v4 and v6 prefixes were created but not deleted on
shutdown properly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 25b1001dc9)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Allow other supported Operating Systems (OS) to use file descriptor
polling, instead of doing timed fd checks. This should improve
performance greatly on modern OSes (e.g. that support polling on
filtered sockets).
The known OS that doesn't support this is FreeBSD < 5.0, but even then
FRR doesn't compile in these versions. OSes using DLPI method (e.g
Solaris) does not support select()/poll()ing fds as well, so it will be
disabled for it.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
None of these variables can actually be used before being initialized,
but unfortunately some old compilers are not smart enough to detect that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reverts commit d9e5b00955.
ETH_ALEN is not equivalent to ETHER_HDR_LEN. ETHER_HDR_LEN is the
definition for the length of the full ethernet header, meanwhile
ETH_ALEN is just the length of the ethernet address.
Here is the OpenBSD/FreeBSD definition for ETHER_HDR_LEN:
#define ETHER_ADDR_LEN 6 /* Ethernet address length */
#define ETHER_TYPE_LEN 2 /* Ethernet type field length */
#define ETHER_HDR_LEN ((ETHER_ADDR_LEN * 2) + ETHER_TYPE_LEN)
(OpenBSD's definition is at net/if_ether.h, FreeBSD's is at
net/ethernet.h)
Linux definitions can be found at: net/ethernet.h
#define ETHER_ADDR_LEN ETH_ALEN /* size of ethernet addr */
#define ETHER_TYPE_LEN 2 /* bytes in type field */
#define ETHER_HDR_LEN ETH_HLEN /* total octets in header */
net/if_ether.h:
#define ETH_HLEN 14 /* Total octets in header. */
#define ETH_ALEN 6 /* Octets in one ethernet addr */
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add a timestamp information for level 2 circuits, otherwise if the
circuit is marked as already processed on level 1 we will not process
level 2 areas.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Use the thread cached clock to use as start time. It will save a call to
clock_gettime() and also provide a more 'accurate' time measurement from
the start of the procedure.
The $Id: lines would allow code kept in cvs to substitute
the file version upon checkout. Since we are not using
cvs there is no need to keep these lines anymore.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
IFINDEX_DELETED is not necessary anymore as we moved from a global
list of interfaces to a list of interfaces per VRF.
This reverts commit 84361d615.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
tlvs is not used after extracting the last TLV. So,
let's tell to the compiler that it is expected.
Signed-off-by: Vincent Jardin <vincent.jardin@6wind.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
While vertizes should be strictly ordered on insertion, deletion
will of course encouter equality.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When we receive or generate new versions of fragments which are
curently pending for age out, we need to ensure that they are correctly
linked to their lsp0.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
isis_spf_schedule gets called in states where an immediate spf run
will lead to crashes, e.g. from lsp_destroy. Delay the spf execution
until the event calling isis_spf_schedule has run to completion to
avoid this.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
There is no point in building a multipath route via one neighbor
if there is only one link to the neighbor, but the neighbor has
multiple IPs on that link. So only create one nexthop per link.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Standard IS-IS only supports up to 256 fragments per router. Recognize
when the information we want to advertise exceeds 256 fragments and
print a warning in this case instead of overflowing the fragment counter
and overwriting existing LSP fragments.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
SPF maintains a datastructure which is never actually read. I think
we can spend CPU more sensibly.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This is a fallout from PR #1022 (zapi consolidation). In the early days,
the client daemons would allocate enough memory to send all nexthops
to zebra. Then zebra would add all nexthops to the RIB and respect
MULTIPATH_NUM only when installing the routes in the kernel. Now things
are different and the client daemons can send at most MULTIPATH_NUM
nexthops to zebra, and failure to respect that will result in a buffer
overflow. The MULTIPATH_NUM limit in the new zebra API is a small price
we pay to avoid allocating memory for each route sent to zebra.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There are 3 different implementations of is_prefix.
Standardize on is_prefix_default and fix it's implementation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Specifically, gcc 4.2.1 on OpenBSD 6.0 warns about these; they're bogus
(gcc 4.2, being rather old, isn't quite as "intelligent" as newer
versions; the newer ones apply more logic and less warnings.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This method is intended to be only used for debugging as per the author
and profiling shows we are spending a lot of cycles on it. Remove it for
regular builds by guarding it with a define.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
We only needed to add/change the vrf callbacks when we initialize
the vrf subsystem. As such it is not necessary to handle the callbacks
in any other way than through the init function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Contains the fetch-and-run-thread logic, and vty startup (which is the
last thing happening before entering the main loop).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Centralise read_config/daemonize/dryrun/pidfile/vty_serv into libfrr.
This also makes multi-instance pid/config handling available as part of
the library. It's only wired up in ospfd, but the code is in lib/.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Start centralising startup & option parsing into the library.
FRR_DAEMON_INFO is a bit weird, but it will become useful later (e.g.
for killing the ZLOG_* enum, and having the daemon name available)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- SPF is now per level only (no more per family)
- t_spf and pending removed from struct spftree and moved to
spf_timer field in struct isis_area
- show isis summary output changed to accomodate the per level SPF
- isis_spf_schedule6 and isis_run_spf6_lx functions are removed,
isis_run_spf_lx now calls isis_run_spf for both INET and INET6
- lsp related functions now call isis_spf_schedule only
The library libzebra that is installed with FRR will
conflict with Quagga. So let's rename it to libfrr.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This introduces ZAPI_MESSAGE_SRCPFX, and if set adds a source prefix
field to ZAPI IPv6 route messages sent from daemons to zebra. The
function calls all have a new prefix_ipv6 * argument specifying the
source, or NULL. All daemons currently supply NULL.
Zebra support for processing the field was added in the previous patch,
however, zebra does not do anything useful with the value yet.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Somewhere in the past we switched from
using the auto-generated redistribute statements
to a non-generated version. This caused us to
loose new protocols to redistribute as they are
added. Put it back.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Conflicts (CLI vs. atol()):
- bgpd/bgp_vty.c
- ospfd/ospf_vty.c
- zebra/zebra_vty.c
NB: pull req #65 (LabNConsulting/working/2.0/afi-safi-vty/c) was
excluded from this merge.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* lib/if.h: Remove LP_TE as Link Parameters is set if different from 0
See IS_LINK_PARAMS_SET macro and use LP_TE_METRIC to determine if TE metric
is set or not
* lib/if.c: replace LP_TE by LP_TE_METRIC in default LP status
* zebra/interface.c: replace LP_TE by LP_TE_METRIC and check if TE metric
is equal to standard metric or not
* ospfd/ospf_te.c: replace LP_TE by LP_TE_METRIC
* isisd/isis_te.c: replace LP_TE by LP_TE_METRIC
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
All of the autogenerated macros in lib/route_types.pl are now called
FRR_* instead of QUAGGA_*.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This replaces Quagga -> FRR in most configure.ac settings as well as
a handful of preprocessor macros in the source code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
VTY_DECLVAR_CONTEXT already contains a NULL check, vty warning message
and return statement. These are not needed.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Remove unnecessary debug from isis write mem.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This reduces code duplication and the likelihood of a bug like 186534
("isisd: fix loss of packets after circuit is brought up") to happen
again.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There's no need to provide two definitions of the isis_receive()
function (one for GNU_LINUX and the other for !GNU_LINUX). Both differ
only slightly so it makes more sense to define isis_receive() just once
and use a smaller #ifdef to account for these differences. This improves
code readability.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The last parameter of THREAD_TIMER_ON() is the timeout, and we were
using circuit->fd for that. So, when a circuit was brought up, isisd
would miss all received packets on this circuit for quite a few seconds,
slowing down the convergence process.
To fix this, use the same logic we use in isis_receive() to calculate
this timeout.
This bug doesn't happen on Linux, which uses a different method to read
packets from the network.
Fixes the following ANVL tests on FreeBSD: ISIS-17.1, ISIS-18.6 (and
probably others too).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
we *really* don't want to receive every single packet (of any protocol
type) coming in on an IS-IS enabled interface.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bgpd/bgpd.c had a typo
zebra/zebra_mpls_netlink.c was derived from rt_netlink.c
isisd/include-netbsd/* are not needed (2 constants moved over)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code should check for the existance of the correct list prior to
accessing it.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Consolidate the routemap initialization into one
function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Finally, this disables the config editing lock for isisd. It also
enables deprecation warnings for the lib/ and isisd/ to catch accidental
uses of vty->index.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This converts all uses of vty->index over to qobj. With this, isisd now
supports concurrent configuration editing as there are no more unsafe
references held anywhere while in config-edit mode.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Wire up all neccessary isisd first-class objects to be able to use qobj
safe-pointers on them.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* zclient.c: prefix length on router-id and interface address add
messages not sanity checked. fix.
* */*_zebra.c: Prefix length on zebra route read was not checked, and
clients use it to write to storage. An evil zebra could overflow
client structures by sending overly long prefixlen.
Prompted by discussions with:
Donald Sharp <sharpd@cumulusnetworks.com>
icc (the Intel C Compiler) "knows" that assert() can be disabled by
setting specific optimisation flags, and therefore emits a warning about
missing a return value after an "always-error" assert.
Workaround by returning a value - this probably needs discussion and a
better fix (for all places where the code needs to abort due to internal
errors).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
I have a fix for 2 segmentation fault scenarios on the isis daemon:
1. When running a command "isis passive" on an interface in the
following context:
"end"
"configure terminal "
"interface dummy0"
"isis passive"
The trace back collected:
isis_adjacency.c:521
family=2,
root_sysid=0x20aee6d0 "", parent=0x20af4d68) at isis_spf.c:999
sysid=0x20aee6d0 "")
at isis_spf.c:1217
isis_spf.c:1372
isis_lsp.c:416
isis_lsp.c:1660
isis_main.c:368
The fix location:
file name: isisd/isis_adjacency.c
routine name: isis_adj_build_up_list
2. When deleting the existing isis router instance:
"end"
"configure terminal "
"no router isis DEAD"
The fix location:
isisd/isis_events.c, routine circuit_resign_level
isisd/isis_lsp.c, routine lsp_destroy
isisd/isis_route.c, isis_route_validate
The trace back collection:
"DEAD") at isisd.c:252
argc=1, argv=0xbfc39054) at isisd.c:1520
vty=0x20d6f528, cmd=0x0) at command.c:2121
cmd=0x0, vtysh=0) at command.c:2155
isis DEAD") at vty.c:433
isis_main.c:368
and
"DEAD") at isisd.c:260
argc=1, argv=0xbfd6cf54) at isisd.c:1520
vty=0x208cb528, cmd=0x0) at command.c:2121
cmd=0x0, vtysh=0) at command.c:2155
isis DEAD") at vty.c:433
isis_main.c:368
The patch is included.
patchwork #833: http://patchwork.quagga.net/patch/833/
Since recently zebra uses only the ZEBRA_REDISTRIBUTE_* messages
to advertise redistributed routes to its clientes. Now the old
ZEBRA_IPV*_ROUTE_* messages are only used for client->zebra communication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Move over to the new allocation counting added in the previous commit.
(This commit is mostly mechanical.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
The regular expression for finding DEFUN/ALIAS in
extract.pl looks for "DEFUN (" or "ALIAS (" if
the *.c file does not have this then it will just
silently ignore the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Apparently extract.pl requires in it's regular expression
a space after the DEFUN or ALIAS before the opening (
or it completely skips the command. Brilliant?
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
draft-ietf-isis-te-metric-extensions-11 has been published as RFC 7810
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
(cherry picked from commit b2d48d2838ef4813f4c7c7d0ce1d55dc25e3acf1)
These patches is an implementation of RFC5305 that enable the
support of Traffic Engineering in IS-IS
* isisd/Makefile.am: Add new files isis_te.c and isis_te.h
* isisd/isis_circuit.[c,h]: Add new mpls_te_circuit structure to isis_circuit
structure to handle new Traffic Engineering TLVs
* isisd/isis_lsp.c: Update LSP handler to mux/demux Traffic Engineering TLVs
* isisd/isis_main.c: Add initialisation of ISIS TE
* isisd/isis_pdu.c: Update function process_p2p_hello() to retrieve remote IP
address to populate Traffic Engineering TLV.
* isisd/isis_te.[c,]: Implementation of RFC5305
* isisd/isis_tlv.[c,h]: Update TLV definition and function to handle
Traffic Engineering ones
* isisd/isis_zebra.c: Add new function isis_zebra_link_params() to retrieve
the link parameters of interfaces from ZBus to populate the Traffic Engineering
TLVs
* isisd/isisd.[c,h]: Add Traffic Engineering support with new debug command
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This removes the BSD specific usage of struct sockaddr_dl
hardware address. This unifies to use explict hw_addr member for
the address, and zebra specific enumeration for the link layer
type.
Additionally the zapi is updated to never send platform specific
structures over the wire, but the ll_type along with hw_addr_len
and hw_addr are now sent for all platforms.
Based on initial work by Paul Jakma.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be kept; you may remove them yourself if you want to.
# An empty message aborts the commit.
#
# Author: Timo Teräs <timo.teras@iki.fi>
#
# rebase in progress; onto 9c2f85d
# You are currently editing a commit while rebasing branch 'renato' on '9c2f85d'.
#
# Changes to be committed:
# modified: isisd/isis_circuit.c
# modified: lib/if.c
# modified: lib/if.h
# modified: lib/zclient.c
# modified: zebra/interface.c
# modified: zebra/interface.h
# modified: zebra/kernel_socket.c
# modified: zebra/rt_netlink.c
# modified: zebra/rtadv.c
# modified: zebra/zserv.c
#
# Untracked files:
# "\033\033OA\033OB\033"
# 0001-bgpd-fix-build-on-Solaris.patch
# ldpd/
# redhat/ldpd.init
# redhat/ldpd.service
# tags
#
Use the 'enum nexthop_types_t' instead of
the zebra.h #defines. And remove code from
zebra.h that does not belong there.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Instead of later tripping over an assert, add a proper warning for
interfaces whose MTU is too low.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Code's "is_type" is "circuit-type" in CLI, "circuit_type" is "network"
(type) in CLI, and the function to change is_type is
isis_event_circuit_type_change()... *headdesk*
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
A newly-created circuit will be in enabled state but have neither IPv4
nor IPv6 configured. The logic in isis_circuit_af_set assumed that
"enabled" is equivalent to "ip || ipv6".
This is the only place where this distinction is currently relevant, as
the CLI won't allow enabling an interface without enabling either IPv4
or IPv6; and it will also disable a circuit when both are deconfigured.
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Between the awkwardly managed CSM and the tacked-on IPv6 support, the
simplified logic to setup a circuit wasn't quite right.
Note that the API essentially allows creating a circuit without enabling
either IPv4 or IPv6. This wasn't possible before and probably breaks
isisd in 'interesting' ways. The CLI won't do this, so it's only an
issue when adding on other configuration mechanisms.
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Expense, Error and Delay metrics never quite made it into the real
world. Either way isisd does nothing useful with them, so let's drop
them from the code. If someone wants to implement them, this patch can
still be reverted.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Last isisd CLI cleanup for now. This also folds L1 & L2 configs into
common functions, reducing CLI function bloat by a bit.
(This patch contains changes authored by both Christian Franke and David
Lamparter.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
No setters needed since change of fields doesn't require any
specific action to make it apply. Just move the CLI defs to isis_vty.c.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This cleans up circuit password configuration a little bit.
(Restructured several times by both Christian Franke and David
Lamparter.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Move out basic area configuration (metric type, overload and attachment
bits, dynamic hostname extension enable) into isis_vty.c.
[v2: moved stuff back here that accidentally was in the previous patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Create isis_vty.c and start moving off CLI functions into that. These
then call newly-added "nice" API wrappers.
Patch contains significant work authored by Christian Franke.
[v2: removed stuff that crept in from the next patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- list_add_node_next was in fact unused
- list_add_node_prev performs a subset of listnode_add_before and
its only use in isisd replaced with that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Added a default log file named /var/log/quagga/Quagga.log to every daemon
to capture log entries if no log file is defined. This also allows the
capture of logged information prior to reading each daemon's config file.
If a log file is defined manually, it will override this default file name.
Ticket: CM-10987
Signed-off-by: Don Slice
Reviewed By: Donald Sharp
Testing Done: Manual testing
zebra.h pulls in config.h, which results in fiddling with things like
__FILE_OFFSET_BITS. It must always be included first, in order to set
flags that influence the compiler via <features.h>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 821df2cf18e5978cc7ab532a8695444380d08270)
isisd had a few places that mixed up size_t vs. unsigned long, and %zd
vs. %ld. Clean out.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 01da6176b88fe59b3c6ceaf3630df88046c83159)
This just mops up a few warnings in isisd.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit f50ee93d12f8213a048a04fcf7d73e12662288e5)
y1 and yn are POSIX standard names for Bessel functions. For
consistency, just rename all of these variables from "y" to "yy".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
