These two debug messages are so verbose to a point they impact
performance when testing RLFA/TI-LFA on large-scale networks. Remove
them since they aren't really useful.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Always call vid2string() whenever necessary instead of trying to be
too clever and call it only once. The original assumption was that
"buf" only needed to be initialized when LFA debugging was enabled,
but we also need that buffer when logging one error message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remote LFA (RFC 7490) is an extension to the base LFA mechanism
that uses dynamically determined tunnels to extend the IP-FRR
protection coverage.
RLFA is similar to TI-LFA in that it computes a post-convergence
SPT (with the protected interface pruned from the network topology)
and the P/Q spaces based on that SPT. There are a few differences
however:
* RLFAs can push at most one label, so the P/Q spaces need to
intersect otherwise the destination can't be protected (the
protection coverage is topology dependent).
* isisd needs to interface with ldpd to obtain the labels it needs to
create a tunnel to the PQ node. That interaction needs to be done
asynchronously to prevent blocking the daemon for too long. With
TI-LFA all required labels are already available in the LSPDB.
RLFA and TI-LFA have more similarities than differences though,
and thanks to that both features share a lot of code.
Limitations:
* Only RLFA link protection is implemented. The algorithm used
to find node-protecting RLFAs (RFC 8102) is too CPU intensive and
doesn't always work. Most vendors implement RLFA link protection
only.
* RFC 7490 says it should be a local matter whether the repair path
selection policy favors LFA repairs over RLFA repairs. It might be
desirable, for instance, to prefer RLFAs that satisfy the downstream
condition over LFAs that don't. In this implementation, however,
RLFAs are only computed for destinations that can't be protected
by local LFAs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The "load-sharing" node is a boolean leaf that has a default
value. As such, it doesn't make sense to either create or delete
it. That node always exists in the configuration tree. Its value
should only be modified. Change the corresponding CLI wrapper
command to reflect that fact.
This commit doesn't introduce any change of behavior as the NB API
maps create/destroy edit operations to modify operations whenever
that makes sense. However it's better to not rely on that behavior
and always use the correct operations in the CLI commands.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When last area address is removed, resign if we were DR.
This fixes an issue where: when the ISIS area address is changed, ISIS fails
to elect a new DR.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Removing the obsolete ldp-sync periodic 'hello' message.
When ldp-sync is configured, IGPs take action if the LDP process goes down.
The IGPs have been updated to use the zapi client close callback to detect
the LDP process going down.
Signed-off-by: Karen Schoener <karen@voltanet.io>
In some extraordinary circumstances an LSP might not have any
TLV. Add a null check to prevent a crash when that happens.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When ldp-sync is configured, IGPs take action if the LDP process goes down.
Currently, IGPs detect the LDP process is down if they do not receive a
periodic 'hello' message from LDP within 1 second.
Intermittently, this heartbeat mechanism causes false topotest failures.
When the failure occurs, LDP is busy receiving messages from zebra for a
few seconds. During this time, LDP does not send the expected periodic
message.
With this change, IGPs detect LDP down via zapi client close message.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Instead of storing the LSP associated to pseudonodes only, store the
LSP associated to all SPF adjacencies instead.
The upcoming LFA work will need to have that piece of information
for all SPF adjacencies in order to know which ones have the overload
bit set or not. Other use cases might arise in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Rename "debug isis ti-lfa" to "debug isis lfa". Having different
debug guards for different kinds of LFA (classic, remote and TI-LFA)
doesn't make sense since all LFA solutions share code to certain
extent.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Those constants are also useful in contexts other than LDP-IGP
Synchronization (e.g. the upcoming LFA work will need them). Move
them to a more general header to reflect that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do not attempt to install a TI-LFA backup nexthop if its number of
labels exceeds the locally configured MSD (Maximum Stack Depth). The
idea is to prevent forward-plane installation failures before they
happen. The MSD check should also allow the "show isis fast-reroute
summary" command (not implemented yet) to display the actual
protection coverage provided by TI-LFA, which might not be 100%
if the MSD isn't big enough.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Commit 4c75f7c773 fixed a bug in which the TI-LFA repair paths
weren't preserving the original Prefix-SID of the routes. That
commit, however, didn't update the zebra interface code to account
for backup nexthops that don't have a repair list but do have a
SR label. As a consequence, backup nexthops that didn't have any
repair label were not preserving the original Prefix-SID of the
corresponding routes. Fix this and update the TI-LFA topotest
accordingly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
vertex->N is an union whose "id" and "ip" fields are only valid
depending on the vertex type (IS adjacency or IP reachability
information). As such, add a vertex type check before consulting
vertex->N.id in order to prevent unexpected behavior from happening.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The "ifp" variable returned by nb_running_get_entry() might be
NULL when using the transactional CLI mode. Make the required
modifications to avoid null pointer dereferences.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once the remote end of a connected link is shut down (or lose
its address), isisd will remove the corresponding route from its
RIB after SPF runs. A new route for the same destination should
be computed based on the local LSP, and that route by definition
doesn't have any nexthop. The problem is that, when isisd tries
to replace the old route by the new one, it fails because routes
without nexthops can't be installed. That causes the old invalid
route to remain in the RIB when it shouldn't. To fix this problem,
change the zebra interface code to uninstall a route whenever it
can't be installed (because it lacks nexthops) instead of doing
nothing in that case.
This change should fix occasional failures of the test_isis_sr_topo1
topotest.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The `enum zclient_send_status` enum needs to be extended
throughout the code base to use the new states and
to fix up places where we tested against the return
value being non zero.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
On redistribution into isis we were creating a table for
handling the redistributed routes, but never cleaning them
up on shutdown properly. Do so.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When isis is being shutdown the area->spf_timer thread has
special data assigned to that was never being freed.
Free this data.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a second iteration of commit 10bdc68f0c. Some recent
commits introduced zlog calls in the northbound callbacks
inadvertently.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
isisd relies on its YANG module to prevent the same SID index
from being configured multiple times for different prefixes. It's
possible, however, to have different routers assigning the same SID
index for different prefixes. When that happens, we say we have a
Prefix-SID collision, which is ultimately a misconfiguration issue.
The problem with Prefix-SID collisions is that the Prefix-SID that
is processed later overwrites the previous ones. Then, once the
Prefix-SID collision is fixed in the configuration, the overwritten
Prefix-SID isn't reinstalled since it's already marked as installed
and it didn't change. To prevent such inconsistency from happening,
add a safeguard in the SPF code to detect Prefix-SID collisions and
handle them appropriately (i.e. log a warning + ignore the Prefix-SID
Sub-TLV since it's already in use by another prefix). That way,
once the configuration is fixed, no Prefix-SID label entry will be
missing in the LFIB.
Reported-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The fields in the broadcast/p2p union struct in an isis circuit are
initialized when the circuit goes up, but currently this step is
skipped if the interface is passive. This can create problems if the
circuit type (referred to as network type in the config) changes from
broadcast to point-to-point. We can end up with the p2p neighbor
pointer pointing at some garbage left by the broadcast struct in the
union, which would then cause a segfault the first time we would
dereference it - for example when building the lsp, or computing the
SPF tree.
compressed backtrace of a possible crash:
#0 0x0000555555579a9c in lsp_build at frr/isisd/isis_lsp.c:1114
#1 0x000055555557a516 in lsp_regenerate at frr/isisd/isis_lsp.c:1301
#2 0x000055555557aa25 in lsp_refresh at frr/isisd/isis_lsp.c:1381
#3 0x00007ffff7b2622c in thread_call at frr/lib/thread.c:1549
#4 0x00007ffff7ad6df4 in frr_run at frr/lib/libfrr.c:1098
#5 0x000055555556b67f in main at frr/isisd/isis_main.c:272
isis_lsp.c:
1112 case CIRCUIT_T_P2P: {
1113 struct isis_adjacency *nei = circuit->u.p2p.neighbor;
1114 if (nei && nei->adj_state == ISIS_ADJ_UP
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
There exists a code path where we would allocate memory
then test a variable and then immediately return NULL.
Prevent memory from leaking in this situation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
valgrind is showing a usage of uninited memory:
==935465== Conditional jump or move depends on uninitialised value(s)
==935465== at 0x159E17: tlvs_area_addresses_to_adj (isis_tlvs.c:4430)
==935465== by 0x15A4BD: isis_tlvs_to_adj (isis_tlvs.c:4568)
==935465== by 0x1377F0: process_p2p_hello (isis_pdu.c:203)
==935465== by 0x1391FD: process_hello (isis_pdu.c:781)
==935465== by 0x13BDBE: isis_handle_pdu (isis_pdu.c:1700)
==935465== by 0x13BECD: isis_receive (isis_pdu.c:1744)
==935465== by 0x49210FF: thread_call (thread.c:1585)
==935465== by 0x48CFACB: frr_run (libfrr.c:1099)
==935465== by 0x1218C9: main (isis_main.c:272)
==935465==
==935465== Conditional jump or move depends on uninitialised value(s)
==935465== at 0x483EEC5: bcmp (vg_replace_strmem.c:1111)
==935465== by 0x15A290: tlvs_ipv4_addresses_to_adj (isis_tlvs.c:4512)
==935465== by 0x15A4EB: isis_tlvs_to_adj (isis_tlvs.c:4570)
==935465== by 0x1377F0: process_p2p_hello (isis_pdu.c:203)
==935465== by 0x1391FD: process_hello (isis_pdu.c:781)
==935465== by 0x13BDBE: isis_handle_pdu (isis_pdu.c:1700)
==935465== by 0x13BECD: isis_receive (isis_pdu.c:1744)
==935465== by 0x49210FF: thread_call (thread.c:1585)
==935465== by 0x48CFACB: frr_run (libfrr.c:1099)
==935465== by 0x1218C9: main (isis_main.c:272)
Effectively we are reallocing memory to hold data. realloc does not
set the new memory to anything. So whatever happens to be in the memory
is what is there. after the realloc happens we are iterating over the
memory just realloced and doing memcmp's to values in it causing these
use of uninitialized memory.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
==935465== 40 bytes in 1 blocks are definitely lost in loss record 71 of 546
==935465== at 0x483AB65: calloc (vg_replace_malloc.c:760)
==935465== by 0x48D6611: qcalloc (memory.c:110)
==935465== by 0x48CFE02: list_new (linklist.c:32)
==935465== by 0x15DBF0: isis_new (isisd.c:213)
==935465== by 0x15DAC4: isis_global_instance_create (isisd.c:179)
==935465== by 0x121892: main (isis_main.c:264)
==935465== 64 (40 direct, 24 indirect) bytes in 1 blocks are definitely lost in loss record 101 of 546
==935465== at 0x483AB65: calloc (vg_replace_malloc.c:760)
==935465== by 0x48D6611: qcalloc (memory.c:110)
==935465== by 0x48CFE02: list_new (linklist.c:32)
==935465== by 0x15DBE3: isis_new (isisd.c:212)
==935465== by 0x15DAC4: isis_global_instance_create (isisd.c:179)
==935465== by 0x121892: main (isis_main.c:264)
On isis shutdown we are seeing the above memory leaks. Modify
the code to start cleaning this up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the "n-flag-clear" option to the "segment-routing prefix"
command. The only thing that option does is to clear the node
flag of the Prefix-SID, even if it corresponds to a local loopback
address. No changes are necessary other than that in order to fully
support Anycast-SIDs. isisd already supports multiple routers
advertising the same route with the same Prefix-SID after the recent
refactoring. Clearing the node flag for such anycast routes isn't
strictly required, but failure to do so can lead to problems like
TI-LFA picking the wrong Prefix-SID when calculating repair paths.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When computing backup nexthops for routes that contain a Prefix-SID,
the original Prefix-SID label should be present at the end of
backup label stacks (after the repair labels). This commit fixes
that oversight in the original TI-LFA code. The SPF unit tests and
TI-LFA topotes were also updated accordingly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Embed Prefix-SID information inside SPF data structures so that
Prefix-SIDs can be installed together with their associated routes
at the end of the SPF algorithm. This is different from the current
implementation where Prefix-SIDs are parsed and processed separately,
which is vastly suboptimal.
Advantages of the new code:
* No need to parse the LSPDB an additional time to detect and process
SR-related changes;
* Routes are installed with their Prefix-SID labels in the same ZAPI
message. This can prevent packet dropping for a few milliseconds
after each SPF run if there are BGP-labeled routes (e.g. L3VPN) that
recurse on IGP labeled routes;
* Much easier to support Anycast-SIDs, as the SPF code will naturally
figure out the best nexthops and use only them (that can't be done
in any reasonable way if the Prefix-SID Sub-TVLs are processed
separately);
* Less code to maintain and reduced memory footprint;
The "show isis segment-routing prefix-sids" command was removed as
it doesn't make sense anymore now that "show isis route" exists.
Prefix-SIDs are a property of routes, so what was done was to extend
the "show isis route" command with a new "prefix-sid" option that
changes the output table to show the Prefix-SID information associated
to each route.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is preparatory change for the upcoming SR Prefix-SID
refactoring.
Since Prefix-SID information will be stored inside IS-IS routes
(instead of being maintained separately), it will be necessary to
have local routes in order to store local Prefix-SID information.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When both old and new-style TLVs exist for a particular prefix, give
precedence to the new-style TLV (like JUNOS does) when generating
routes from the SPT. This changes the current behavior which is to
generate a route for both TLVs, whereas the first is overwritten by
the second in a non-deterministic order (i.e. either the old-style
or the new-style TLV can "win" depending on how the SPF TENTative
list is arranged).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Interface area-tag is not supposed to be modified once defined, but the
necessary check is currently broken, because the circuit is never in
init_circ_list if the area-tag is already configured for the interface.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
TI-LFA is a modern fast-reroute (FRR) solution that leverages Segment
Routing to pre-compute backup nexthops for all destinations in the
network, helping to reduce traffic restoration times whenever a
failure occurs. The backup nexthops are expected to be installed
in the FIB so that they can be activated as soon as a failure
is detected, making sub-50ms recovery possible (assuming an
hierarchical FIB).
TI-LFA is a huge step forward compared to prior IP-FRR solutions,
like classic LFA and Remote LFA, as it guarantees 100% coverage
for all destinations. This is possible thanks to the source routing
capabilities of SR, which allows the backup nexthops to steer traffic
around the failures (using as many SIDs as necessary). In addition
to that, the repair paths always follow the post-convergence SPF
tree, which prevents transient congestions and suboptimal routing
from happening.
Deploying TI-LFA is very simple as it only requires a single
configuration command for each interface that needs to be protected
(both link protection and node protection are available). In addition
to IPv4 and IPv6 routes, SR Prefix-SIDs and Adj-SIDs are also
protected by the backup nexthops computed by the TI-LFA algorithms.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The code in isisd uses `circuit->area->isis` all the time
but we know that circuit now has a valid `circuit->isis` pointer
so let's use that and cleanup the long dereference.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There are code paths where we were not always setting the
circuit->isis on creation. Fix that up so it will always
happen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Lookup in C_STATE_NA must be made before the new circuit creation, or it
will be leaked if the isis instance is not found. All other lookups are
unnecessary - we just need to remember the previously used instance.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
* add files to vtysh_scan when building only fabricd
* don't add isisd/fabricd commands when daemon build is disabled
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
An adjacency should be removed when the holdtimer expires, but if the
system is overloaded we may end up doing it late. In the meanwhile vtysh
will display an incorrect value in the show isis neighbor output, due to
an overflow of the unsigned variable used to display the Holdtime, e.g.:
pe1# show isis neighbor
Area test:
System Id Interface L state Holdtime SNPA
Spirent-1 2.201 1 Down 26 2020.2020.2020
Spirent-1 2.203 1 Up 21 2020.2020.2020
Spirent-1 2.204 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.207 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.208 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.209 1 Up 0 2020.2020.2020
Spirent-1 2.210 1 Up 18446744073709551615 2020.2020.2020
pe2 12.200 1 Up 30 2020.2020.2020
Guard against that by printing an "Expiring" message instead.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
There is no need to call isis_adj_state_change_hook once per level
in isis_adj_state_change, we can just do it once at the end.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
suppress route-event logs that are uninformative and add more info to
the ones that matter, i.e. hints on what changed in a route update. The
suppressed logs can be enabled by defining EXTREME_DEBUG to 1, similarly
to what is done elsewhere in isisd (e.g. in isis_spf.c)
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Currently, when the is-type of an area is changed and its circuits resign,
we are not resetting the DIS flag. Consequently, if the area type is reverted
we are not running the DR election and not regenerating the pseudonode LSP.
Also adding event debug logs for circuit commence/resign.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
1. Added isis with different vrf and it's dependecies.
2. Added new vrf leaf in yang.
3. A minor change for IF_DOWN_FROM_Z passing argrument is
replaced with ifp pointer in api "isis_if_delete_hook()".
4. Minor fix in the isisd spf unit test.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
RFC 7490 says:
"The reverse SPF computes the cost from each remote node to root. This
is achieved by running the normal SPF algorithm but using the link
cost in the direction from the next hop back towards root in place of
the link cost in the direction away from root towards the next hop".
Support for reverse SPF will be necessary later as it's one of the
algorithms used to compute R-LFA/TI-LFA repair paths.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Now that the IS-IS SPF code is more modular, write some unit tests
for it.
This commit includes a new test program called "test_isis_spf" which
can load any test topology (there are 13 different ones available)
and run SPF on any desired node. In the future this same test program
and topologies will also be used to test reverse SPF and TI-LFA.
The "test_common.c" file contains helper functions used to parse the
topology descriptions from "test_topologies.c" into LSP databases
that can be used as an input to the SPF code.
This commit also introduces the F_ISIS_UNIT_TEST flag which is used
to prevent the IS-IS code from scheduling any event when running
under the context of an unit test.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The goal of modularizing the SPF code is to make it possible for
isisd to run SPF in the behalf of other nodes in the network, which
is going to be necessary later when implementing the R-LFA/TI-LFA
solutions. On top of that, a modularized SPF opens the door for
much needed unit testing.
Summary of the changes:
* Change the isis_spf_preload_tent() function to use the local LSP
as an input (as per the ISO specification) instead of populating
the TENT based on the list of local interfaces;
* Introduce the "isis_spf_adj" structure to represent an SPF
adjacency. SPF adjacencies are inferred from the LSPDB, different
from normal adjacencies formed using IIH messages;
* Introduce the F_SPFTREE_NO_ROUTES flag to control whether the
SPT should create routes or not;
* Introduce the F_SPFTREE_NO_ADJACENCIES flag to specify whether
IS-IS adjacency information is available or not. When running SPF
in the behalf of other nodes, or under the context of an unit test,
no adjacency information will be present.
* On isis_area_create(), move some code around so that the area's isis
backpointer is set as early as possible.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce the "show isis route" command to display the routes
associated to an SPF tree. Different from the "show ip route" command,
"show isis route" displays the L1 and L2 routes separately (and not
the best routes only).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Bring back some consts that were removed;
* Replace ALL_LIST_ELEMENTS by ALL_LIST_ELEMENTS_RO whenever
possible;
* Fix some CLI return values;
* Remove some unnecessary initializations.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is mostly a cosmetic change to make the code more modular,
more elegant and easier to understand.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Iterating over all IP or IS reachability information from a given
LSP isn't a trivial task. That information is scattered throughout
different TLV types, and which ones need to be used depend on
multiple variables (e.g. the SPF tree address family, MT-ID,
etc). This not to mention that an LSP might consist of multiple
fragments.
Introduce the following two LSP iteration function to facilitate
obtaining IP/IS reachability information from a given LSP:
* isis_lsp_iterate_ip_reach()
* isis_lsp_iterate_is_reach()
These functions will be used extensively by the upcoming TI-LFA
code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Always fill the buffer provided by the user to prevent unexpected
results and make the function fully reentrant.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Don't use the same starting time for all SPF trees otherwise the
results won't be accurate (they will accumulate instead of being
computed separately).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This should simplify all code that needs to iterate over all
adjacencies of a given area (iterating over all adjacencies of all
circuits is cumbersome).
While here, repurpose isis_adj_exists() into a lookup function,
making it more generally useful.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
