Add a bit of debug to show the listener sockets and who created them
to associate with strace output for a developer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This directive was undocumented, but is the way to configure the
next-hop to be left unchanged for ipv6 setups (in ipv4, a route-map with
`set next-hop unchanged` works fine, but this is unavailable for ipv6) .
Signed-off-by: Raphael Bauduin <rb@raphinou.com>
This change list contains the documentation of BGP Greacful Restart
feature and all the commnads to enable/disable the feature
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
The bgp neighbor password command was not documented additionally
the fact that you may need to instruct the kernel to have more
memory available for tcp sockets when using this feature on a large
number of peers.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
doc/user/bgp.rst:420: WARNING: Title underline too short.
Reject routes with AS_SET or AS_CONFED_SET types
-------------------------------
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
FRR supports the ability to turn off the negotation of bgp capabilities.
Provide a few bread crumbs to the operator that it might not be as
useful as they would hope.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Update the user docs to have information about the `show bgp update-group..
group of commands.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In a data center, having 32-128 peers is not uncommon. In such a situation, to find a
peer that has failed and why is several commands. This hinders both the automatability of
failure detection and the ease/speed with which the reason can be found. To simplify this
process of catching a failure and its cause quicker, this patch does the following:
1. Created a new function, bgp_show_failed_summary to display the
failed summary output for JSON and vty
2. Created a new function to display the reset code/subcode. This is now used in the
failed summary code and in the show neighbors code
3. Added a new variable failedPeers in all the JSON outputs, including the vanilla
"show bgp summary" family. This lists the failed session count.
4. Display peer, dropped count, estd count, uptime and the reason for failure as the
output of "show bgp summary failed" family of commands
5. Added three resset codes for the case where we're waiting for NHT, waiting for peer
IPv6 addr, waiting for VRF to init.
This also counts the case where only one peer has advertised an AFI/SAFI.
The new command has the optional keyword "failed" added to the classical summary command.
The changes affect only one existing output, that of "show [ip] bgp neighbors <nbr>". As
we track the lack of NHT resolution for a peer or the lack of knowing a peer IPv6 addr,
the output of that command will show a "waiting for NHT" etc. as the last reset reason.
This patch includes update to the documentation too.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
Problem reported that "clear bgp *" only cleared ipv6 peers.
Changed the logic to clear all afi/safis of all peers in
that case. Also improved the operation of clearing
individual afi/safi using soft/in/out to do the right thing.
Ticket: CM-25887
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 3 : show related changes for match clause
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 2 : CLI related changes for match clause
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
The `bgp multiple-instance` command has been removed but
we did not properly update the documentation. Let's do so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FRR has no option for the as-set for aggregate route
under IPV6 address family. Added the command to
configure the as-set option for IPV6.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
The current wording can sometimes be misinterpreted to mean that this
command is optional, but for an MPLS-VPN to function a VPN label MUST be
assigned to routes exported from the VPN.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Some draft ietf are not handle by :rfc: keyword. A workaround is
proposed, like it has been done for flowspec.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Documentation on how to use multiple autonomous systems was inaccurate
and a bit scattered. Clarify usage of VRFs with multiple autonomous
systems, how to configure them, and their distinction from views. Also
moves a block on L3VPN VRFs out of the 'Basic Concepts' section.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Coded as part of #2684 and most code written while participating at
BornHack@2018.
bgp.rst: Explain what the communities does and a summarized edition of
the communities purpose.
Signed-off-by: Christoffer <netravnen@gmail.com>
Add some information to inform the user that one can either display ipv4
or ipv6 routing table, with the above commands.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This doc needed (and still needs) a lot of love.
* Reorganize doc into logical sections
* Clean up lots of grammatical mistakes and misspellings
* Clean up lots of bad formatting
* Remove non-existent configuration options and commands
* Mark deprecated configuration options as deprecated
* Fix all cross-references to follow a standard format
* Fix capitalization on section and subsection titles
* Fix section and subsection level underlines
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Note that these commands:
bgp config-type cisco
no bgp multiple-instance
are now deprecated and will be removed in a future version of FRR.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit brings some information about BGP VRF case with peering
using multiple VRF instances.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Run sphinxcontrib-spelling over docs
* Correct spelling errors
* Compile a dictionary for future spellchecking efforts
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add support for CLI "auto" keyword in vrf->vpn export label:
router bgp NNN vrf FOO
address-family ipv4 unicast
label vpn export auto
exit-address-family
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Short and long form options can be written on the same line, Sphinx
understands how to cross-reference using either one of them. Also
replace some - with _ where appropriate.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add the documentation for 'remote-as [internal|external]`
Cleanup some old obsolete information
Specify that interfaces can be used as a peer in bgp
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
At some point the routeserver docs got lost, converted those from texi
and put them back. Also fixed some broken cli xrefs.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is an incomplete stub of a chapter and goes under BGP docs anyway.
Also fix an include statement for RPKI.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Automatically translated all Texinfo files to RST using a script found
on the GCC mailing list[0]. Some formatting manually corrected.
Also created index.rst for building as well as boilerplate Sphinx
conf.py and Makefile.
[0] https://gcc.gnu.org/ml/gcc-patches/2015-11/msg01095.html
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
