Absolutetly cosmetic change, but let it be consistent with other checks
for optional attributes.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This is useful to go back in the past and check when was that prefix appeared,
changed, etc.
```
exit1-debian-9# show ip bgp 172.16.16.1/32
BGP routing table entry for 172.16.16.1/32, version 6
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
home-spine1.donatas.net(192.168.0.2) home-spine1.donatas.net(2a02:bbd::2)
65030
192.168.0.2 from home-spine1.donatas.net(2a02:bbd::2) (172.16.16.1)
Origin incomplete, metric 0, valid, external
Last update: Thu Apr 8 20:15:25 2021
65030
192.168.0.2 from home-spine1.donatas.net(192.168.0.2) (172.16.16.1)
Origin incomplete, metric 0, valid, external, best (Neighbor IP)
Last update: Thu Apr 8 20:15:25 2021
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Just to be more informant, copying from Cisco.
```
exit1-debian-9# sh ip bgp
BGP table version is 4, local router ID is 192.168.100.1, vrf id 0
Default local pref 100, local AS 65534
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
N*> 10.0.2.0/24 0.0.0.0 0 32768 ?
N*> 192.168.0.0/24 0.0.0.0 0 32768 ?
N*> 192.168.10.0/24 0.0.0.0 0 32768 ?
N*> 192.168.100.1/32 0.0.0.0 0 32768 ?
Displayed 4 routes and 4 total paths
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
set_vpn_nexthop/no_set_vpn_nexthop were failing due to missing
declarations and unused variables.
This adds the missing declaration and removes unused variables.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
New and improved submission for this commit -- updated to accommodate
changes from 4027d19b0.
Adds support for 'rd all' matching for EVPN and L3VPN show commands.
Introduces evpn_show_route_rd_all_macip().
Cleans up some show commands to use SHOW_DISPLAY string constants.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
During Review it was suggested that appending rpki_
to curr_state and target_state would be better
variable names. Instead of going and fixing
3 or so commits up. Just do this one.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the ability for the end operator to query the state of valid
or invalid or no information rpki prefix information.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When displaying data about the rpki state, use the
string `rpki validation-state` instead of `validation-state:`
to avoid confusion with `(valid)`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Setup a mh_info indirection in the path extra. This has been done to
avoid increasing evpn route's path size to add new (type based) pointers
in path_info_extra.
Ticket: CM-31398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
There are two changes in this commit -
1. Maintain a list of global MAC-IP routes per-ES. This list is maintained
for quick processing on the following events -
a. When the first VTEP/PE becomes active in the ES-VRF, the L3 NHG is
activated and the route can be sent to zebra.
b. When there are no active PEs in the ES-VRF the L3 NHG is
de-activated and -
- If the ES is present in the VRF -
The route is not installed in zebra as there are no active PEs for
the ES-VRF
- If the ES is not present in the VRF -
The route is installed with a flat multi-path list i.e. without L3NHG.
This is to handle the case where there are no locally attached L2VNIs
on the ES (for that tenant VRF).
2. Reinstall VRF route when an ES is installed or uninstalled in a
tenant VRF (the global MAC-IP list in #1 is used for this purpose also).
If an ES is present in the VRF we use L3NHG to enable fast-failover of
routed traffic.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This new BGP configuration is akin to "bgp bestpath aspath
multipath-relax". When applied, paths learned from different peer types
will be eligible to be considered for multipath (ECMP). Paths from all
of eBGP, iBGP, and confederation peers may be included in multipaths
if they are otherwise equal cost.
This change preserves the existing bestpath behavior of step 10's result
being returned, not the result from steps 8 and 9, in the case where
both 8+9 and 10 determine a winner.
Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
Adds support for 'rd all' matching for EVPN and L3VPN show commands.
Introduces evpn_show_route_rd_all_macip().
Cleanup some show commands to use SHOW_DISPLAY string constants.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
When dumping data about prefixes in bgp. Let's dump the
rpki validation state as well:
Output if rpki is turned on:
janelle# show rpki prefix 2003::/19
Prefix Prefix Length Origin-AS
2003:: 19 - 19 3320
janelle# show bgp ipv6 uni 2003::/19
BGP routing table entry for 2003::/19
Paths: (1 available, best #1, table default)
Not advertised to any peer
15096 6939 3320
::ffff:4113:867a from 65.19.134.122 (193.72.216.231)
(fe80::e063:daff:fe79:1dab) (used)
Origin IGP, valid, external, best (First path received), validation-state: valid
Last update: Sat Mar 6 09:20:51 2021
janelle# show rpki prefix 8.8.8.0/24
Prefix Prefix Length Origin-AS
janelle# show bgp ipv4 uni 8.8.8.0/24
BGP routing table entry for 8.8.8.0/24
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
100.99.229.142
15096 6939 15169
65.19.134.122 from 65.19.134.122 (193.72.216.231)
Origin IGP, valid, external, best (First path received), validation-state: not found
Last update: Sat Mar 6 09:21:25 2021
Example output when rpki is not configured:
eva# show bgp ipv4 uni 8.8.8.0/24
BGP routing table entry for 8.8.8.0/24
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
janelle(192.168.161.137)
64539 15096 6939 15169
192.168.161.137(janelle) from janelle(192.168.161.137) (192.168.44.1)
Origin IGP, valid, external, bestpath-from-AS 64539, best (First path received)
Last update: Sat Mar 6 09:33:51 2021
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
'show bgp l2vpn evpn statistics' was returning 0 for all stats
because bgp_table_stats_walker bailed out if afi != AFI_IP or AFI_IP6.
Add case condition to catch AFI_L2VPN.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
If we are filtering a route due to any of the filter reasons
we should not be setting the BGP_NODE_FIB_INSTALL_FIB_PENDING
flag. This is especially evident with say a loopback that
is covered by a network statement. When we receive the route
back from our peer we should not be setting the
BGP_NODE_FIB_INSTALL_PENDING flag on it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
'show bgp ipv[46] vpn neighbors ... advertised-routes' was displaying
empty output due to new command syntax using show_adj_routes() which
assumed each bgp_table was single-tier (not nested). This fixes that
assumption for safis with a two-tier bgp_table (SAFI_MPLS_VPN,
SAFI_ENCAP, and SAFI_EVPN).
Before:
ub18# show bgp ipv6 vpn neighbors 2001:db8:cafe::2 advertised-routes
ub18#
After:
ub20# show bgp ipv6 vpn neighbors 2001:db8:cafe::1 advertised-routes
BGP table version is 2, local router ID is 100.64.0.222, vrf id 0
Default local pref 100, local AS 1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 30:30
*> 2::2/128 :: 0 100 32768 i
*> 2::22/128 :: 0 100 32768 i
Route Distinguisher: 33:33
*> 2::2/128 :: 0 100 32768 i
*> 2::22/128 :: 0 100 32768 i
Total number of prefixes 4
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
`same_attr` has been computed and `hook_call(bgp_process)` (calling
BMP module) would not change it. We could reuse the value to filter
same attribute updates, avoiding an extra comparison.
Signed-off-by: zyxwvu Shi <i@shiyc.cn>
Already not necessary, because if BGP aggregator AS attribute is with
value of 0, then the attribute is already discarded at early processing.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Description:
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Problem Description/Summary :
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Fix: When clear ip bgp dampening, route are put for route-calculation as
that it is install in the Zebra and adv to neighbor.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
If we are using a nexthop for a MPLS VPN route make sure the
nexthop is over a labeled path. This new check mirrors the one
in validate_paths (where routes are enabled when a nexthop
becomes reachable). The check is introduced to the code path
where routes are added and the nexthop is looked up.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
community_str2com("no-export"); returns ALWAYS non-NULL.
If NULL returned here, we really have a bigger problems in the call path.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
RFC says to prevent propagation of the prefix outside the local AS.
So, let's use NO_EXPORT.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Issue: bgpd got kill due to out of memory, when show bgp
neighbor json and show ip bgp neighbor <ip> routes json
commands executed multiple times in a setup having 320554
routes.
RCA: Heap allocated for bgpd keeps increasing. This is verified
using top command and show memory command.
Memleak Fix-1: show ip bgp route json command
When dumping a large bit of table data via bgp_show_route
and if there is no information to display for a particular
struct bgp_node *` the data allocated via json_object_new_array()
is not freed. This is resolved now.
Memleak Fix-2:
The function bgp_peer_counts() doesn't free the memory allocated for
json_loop when there is No such neighbor or address family. This is
fixed now.
Signed-off-by: Sarita Patra <saritap@vmware.com>
