Description:
FRR doesn't re-install the routes, imported from a tenant VRF,
when bgp instance for source vrf is deleted and re-added again.
When bgp instance is removed and re-added, when import statement is already there,
then route leaking stops between two VRFs.
Every 'router bgp' command should trigger re-export of all the routes
to the importing bgp vrf instances.
When a router bgp is configured, there could be bgp vrf instance(s) importing routes from
this newly configured bgp vrf instance.
We need to export routes from configured bgp vrf to VPN.
This can impact performance, whenever we are testing scale from vrf route-leaking perspective.
We should not trigger re-export for already existing bgp vrf instances.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
Add transactional northbound callbacks for route-map
options for unnumbered neighbor and peer-group under
l2vpn-evpn address-family.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
When you use a single BGP session for both IPv4 and IPv6 it's a bit
annoying going into ipv6 address-family and explicitly activating it.
Let's get this automatically if enabled with `bgp default ipv6-unicast`.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
this particular callback had not been implemented in the northbound
conversion, so the command had no effect.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Add SNMP support for L3vpn Vrf table as defined in [RFC4382]
Keep track of vrf status for the table and for future traps.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
a missing '!' operator meant that correct rd strings were being
rejected in the destroy callback, making it impossible to remove
once configured.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
in the nortbound callback for the boolean leaf multi-path-as-set, the
actual value of the leaf was being ignored. As a result, going from
as-set to no-as-set was having no effect.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
- Move vtysh handler to DEFPY
- Convert neighbor route-map command to transactional cli.
- After nb conversion, remove not used apis.
- Implement NB callbacks for afi-safis
Signed-off-by: Chirag Shah <chirag@nvidia.com>
- Move vtysh handler to DEFPY
- Convert neighbor prefix-list command to transactional cli.
- After nb conversion, remove not used apis.
- implement NB apis for ipv4 afi-safis
Signed-off-by: Chirag Shah <chirag@nvidia.com>
There exists a path where we could possibly have a NULL deref
of a pointer. Prevent this from happening.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Reference: https://www.cmand.org/communityexploration
--y2--
/ | \
c1 ---- x1 ---- y1 | z1
\ | /
--y3--
1. z1 announces 192.168.255.254/32 to y2, y3.
2. y2 and y3 tags this prefix at ingress with appropriate
communities 65004:2 (y2) and 65004:3 (y3).
3. x1 filters all communities at the egress to c1.
4. Shutdown the link between y1 and y2.
5. y1 will generate a BGP UPDATE message regarding the next-hop change.
6. x1 will generate a BGP UPDATE message regarding community change.
To avoid sending duplicate BGP UPDATE messages we should make sure
we send only actual route updates. In this example, x1 will skip
BGP UPDATE to c1 because the actual route is the same
(filtered communities - nothing changes).
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When entering values for maximum-path if the user
has entered a value to respect from the bgp cli `-e X`
that is the maximum value we should use when accepting
values from the user.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a BGP vrf instance is deleted, the routes it exported into the
main VPN table are not deleted and they remain as stale routes
attached to an unknown bgp instance. When the new vrf instance comes
along, it imports these routes from the main table and thus we see
duplicatesalongside its own identical routes.
The solution is to call the unexport logic when a BGP vrf instance is
being deleted.
problem example
---------------
volta1# sh bgp vrf VRF-a ipv4 unicast
BGP table version is 4, local router ID is 18.0.0.1, vrf id 5
Default local pref 100, local AS 567
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 7.0.0.6/32 7.0.0.5@0< 10 100 0 ?
*> 7.0.0.8/32 18.0.0.8 0 0 111 ?
*> 18.0.0.0/24 18.0.0.8 0 0 111 ?
*> 56.0.0.0/24 7.0.0.5@0< 0 100 0 ?
Displayed 4 routes and 4 total paths
volta1# conf t
volta1(config)# no router bgp 567 vrf VRF-a
volta1(config)#
volta1(config)# router bgp 567 vrf VRF-a
volta1(config-router)# bgp router-id 18.0.0.1
volta1(config-router)# no bgp ebgp-requires-policy
volta1(config-router)# no bgp network import-check
volta1(config-router)# neighbor 18.0.0.8 remote-as 111
volta1(config-router)# !
volta1(config-router)# address-family ipv4 unicast
volta1(config-router-af)# label vpn export 12345
volta1(config-router-af)# rd vpn export 567:111
volta1(config-router-af)# rt vpn both 567:100
volta1(config-router-af)# export vpn
volta1(config-router-af)# import vpn
volta1(config-router-af)# exit-address-family
volta1(config-router)# !
volta1(config-router)# end
volta1# sh bgp vrf VRF-a ipv4 unicast
BGP table version is 4, local router ID is 18.0.0.1, vrf id 5
Default local pref 100, local AS 567
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 7.0.0.6/32 7.0.0.5@0< 10 100 0 ?
* 7.0.0.8/32 18.0.0.8 0 0 111 ?
*> 18.0.0.8@-< 0 0 111 ?
* 18.0.0.0/24 18.0.0.8 0 0 111 ?
*> 18.0.0.8@-< 0 0 111 ?
*> 56.0.0.0/24 7.0.0.5@0< 0 100 0 ?
Displayed 4 routes and 6 total paths
@- routes indicating unknown bgp instance are imported
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Addressed the gcc-10 buffer overflow warnings.
Put a sanity check of not using prefix for
neighbor update-source with interface option.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
The code is returning the group peer data structure, which
is what is happening but we should not have assignment statements
in this return statement for a `struct peer *` return.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
shorten prefix-limit's option name in yang model.
change restart timer to uint16.
Stubbed northbound callbacks with above changes.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Convert IPv4 and IPv6 unicast address family clis
to transactional clis and implementation of
northbound callbacks.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
In bgp global commands northbound local-as modify callback
check for backend db for checking existing bgp instance.
In an instance where no router bgp with old ASN cleaned up
followed by new bgp instance with new AS is created,
the nb_running_get_entry in validation phase returns stale
bgp reference, which leads to rejection of the router bgp command.
Uncovered via:
toptotest evpn_type5_test_topo1/test_evpn_type5_topo1.py
test_bgp_attributes_for_evpn_address_family_p1
Signed-off-by: Chirag Shah <chirag@nvidia.com>
move `router bgp` nb callback at `bgp` node level
to have access to bgp context at neighbor and peer-group
level and align create/destroy callbacks call during
no router bgp.
Earlier `no router bgp` is performed first global destroy
callback is called which essentially removes `bgp context`
then it calls to remove (parallel nodes) neighbor and peer-group
which does not have access to bgp context.
Moving router bgp at bgp solves this destroy callback ordering issue.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
