There exists a state where we may have a rd node but no individual
evpn prefix nodes in the two level table:
(gdb) bt
at bgpd/bgp_evpn_vty.c:1190
filter=FILTER_RELAXED) at lib/command.c:1060
at lib/command.c:1119
vtysh=vtysh@entry=0) at lib/command.c:1273
(gdb) f 5
at bgpd/bgp_evpn_vty.c:1190
1190 bgpd/bgp_evpn_vty.c: No such file or directory.
(gdb) p buf
$1 = "[2]:[0]:[48]:[00:00:00:00:00:00]", '\000' <repeats 240 times>...
(gdb) p json_nroute
$2 = (json_object *) 0x0
(gdb) p rd_header
$3 = 1
(gdb) p buf
$4 = "[2]:[0]:[48]:[00:00:00:00:00:00]", '\000' <repeats 240 times>...
(gdb)
I'm not entirely sure that this is not a `different` problem in that the
rd node should have been removed. But I think preventing the crash
in a show command is probably the right thing to do here.
Fixes: #4501
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Instead of just passing in the prefix, pass in the particular
bgp_node we are using.
This is setup for a future commit to use this data.
The long term goal is to collect data about why
a particular bgp_path_info was selected as best and
to display that reason.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Bug: If there are 2 different prefixes under an rd, the
output of "show bgp l2vpn evpn json" would print only one of the
prefixes.
RCA: prefix info was added to the json_object once per rd. Hence,
prefix and rd were added just once, as the loop iterated over all
the prefixes and paths.
This is related to my earlier commit that went in via PR 4283:
https://github.com/FRRouting/frr/pull/4283
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
The vpn variable in bgp_evpn_advertise_svi_ip_vni must
be non-null as such it is impossible to ever need the
!vpn test case.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If PIM-SM if used for BUM flooding the multicast group address can be
configured per-vxlan-device. BGP receives this config from zebra via
the L2 VNI add/update.
Sample output -
root@TORS1:~# vtysh -c "show bgp l2vpn evpn vni 1000" |grep Mcast
Mcast group: 239.1.1.100
root@TORS1:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This command is added to provide detailed information. It will be
useful in troubleshooting as we will be able to dump all detailed info
using a single command.
"show bgp l2vpn evpn route [detail] ...". Additional filtering
can be done by providing type of the route.
Command will display the detailed content for all rd and macs-ip as
displayed by "show bgp l2vpn evpn route rd <> mac <>" for a single
rd, mac, ip from the global bgp routing table.
Ticket: CM-24397
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by:
Testing-Done:
This command is added to provide detailed information. It will be
useful in troubleshooting as we will be able to dump all detailed info
using a single command.
"net show bgp evpn route vni <all|id> [detail]". Additional filtering
can be done by providing vtep ip.
Command will display the detailed content for all vni and macs as
displayed by "net show bgp evpn route vni <> mac <> ip <>" for a single
vni, mac, ip.
Ticket: CM-24397
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by:
Testing-Done:
This replaces manual checks of the flag with a wrapper macro to convey
the meaning "is evpn enabled on this vrf?"
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
During L3VNI add, non-default RD value is not replayed
correctly. Instead of picking non-default value it picks
up auto RD value which is derived based on router-id.
Indentation issue: Remove additional space from
L3VNI running config output.
Ticket:CM-24320
Reviewed By:CCR-8437
Testing Done:
Bring up evpn configuration with L3vni up with non-default
RD value, perform peerlink flap, l3vni flap which removes
all VNIS and readds with RD and RT values.
The configured RD and RTs are replayed.
Post L3VNI flap
router bgp 5546 vrf vrf2
!
address-family l2vpn evpn
rd 45.0.66.2:6
route-target import 20001:1
route-target export 20001:1
exit-address-family
TORC11# show bgp l2vpn evpn vni 4002
VNI: 4002 (known to the kernel)
Type: L3
Tenant VRF: vrf2
RD: 45.0.66.2:6
Originator IP: 36.0.0.11
Advertise-gw-macip : n/a
Import Route Target:
20001:1
Export Route Target:
20001:1
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Rename {bgp,zvrf}_def{ault} to {bgp,zvrf}_evpn where it makes sense,
i.e. when they contain the EVPN instance.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
If the EVPN VRF is not the default one (i.e. with advertise-all-vni),
this allows showing its information with `show bgp l2evpn evpn ...`
commands. They do not require adding `vrf VRFNAME` since we only
support a single EVPN VRF. The same is true for zebra-specific commands
(e.g. `show evpn ...`).
Configuration commands are not restricted to the default VRF but to
the EVPN one, that is to the one bearing `advertise-all-vni`.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
This makes the instance bearing the advertise-all-vni config option
register to zebra as the EVPN one, forwarding it the option.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
After a router reboot the L3 network via it converges before the L2
network. This is because MLAG intentionally holds down bridge-access
and vxlan-network ports for some time (MLAG init-delay) to prevent traffic
from switching to a router that is not fully ready. This also means that
routes (from vrf-peering sessions) that qualify for evpn type-5
advertisments are available long before the L3-VNI is available for that
tenant VRF. In these windows bgpd was adding these evpn-type-5 routes with
a L3-VNI of 0 (which was not fixed up after the L3-VNI became available) -
BGP routing table entry for 100.0.0.1:2:[5]:[0]:[0]:[32]:[200.1.1.1]
Paths: (1 available, best #1)
Advertised to non peer-group peers:
MSP1(uplink-1) MSP2(uplink-2)
Route [5]:[0]:[0]:[32]:[200.1.1.1] VNI 0 >>>>>>>>
65001 65535
36.0.0.9 from 0.0.0.0 (27.0.0.9)
Origin incomplete, metric 0, valid, sourced, local, bestpath-from-AS 65001, best
Extended Community: ET:8 RT:5544:4001 Rmac:44:38:39:ff:ff:01
AddPath ID: RX 0, TX 327
Last update: Wed Feb 27 18:37:10 2019
Fix is to defer creating type-5 routes till the L3-VNI is available for
that tenant VRF (this was already being done for most cases; fixup takes
care of some that missed the check).
Ticket: CM-24022
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Made changes and updated the routemap applied counter in the following flows.
1.Increment when route map attached to a list.
2.Decrement when route map removed / modified from a list.
3.Increment/decrement when route map create/delete callback triggered.
4.Besides ,This counter need not be updated when a route map is got updated.
i.e changing/adding a match value to the existing routemap.
In BGP , same update api called for all three add/delete/update operation .
But this counter have to be updated only for routemap addition.
Addressed this specific change by identifying the routemap operation based
on routemap pointer.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
Certain EVPN configuartions should only be applied
under DEFAULT VRF bgpd instance.
reject the cli for non default bgp instance
Ticket:CM-18950
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
During L3VNI add delete, configured non-default
route-target is not replayed correctly.
Non-default route-target should only be deleted
during unconfiguring under bgp vrf instance,
during delete of l3vni only unmap from the VRF.
during addition of l3vni map back to the VRF
Ticket:CM-21482
Testing Done:
Bring up evpn configuration with L3vni up with
non-default route-target.
Perform delete/add of L3vni and validated non-default
route-target is mapped back to vrf.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When "default-originate ipv4" is configured, a type-5 route is installed in
the local node and advertised to the peer with auto-rd.
When the above was followed by configuring an RD in IP VRF, Type-5 are
generated for only the non-default routes.
Fixed this issue by withdrawing the default route with auto-rd and advertising
the route with confiured RD.
Signed-off-by: Kishore Aramalla karamalla@vmware.com
When a VNI is unconfigured it deletes all of its import and export
route-targets. There is a export route-target link list and import
route-target linked list. There are redudant loops in the
route-target deletion code. In the first iteration it deleted the
route-target and freed the RT node, but not list node.
In the 2nd iteration it tries to free the RT node again, resulting in
the double free of RT node.
Signed-off-by: "Kishore Aramalla karamallavmware.com"
Duplicate address detection configuration clis
under bgp l2vpn evpn config mode.
- Enabled/Disable (global knob) for feature.
- Configure cli for duplicate detection action
freeze and freze until time (auto-recovery).
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The bgp_info data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the '[no] flood <disable|head-end-replication>' command
to the l2vpn evpn afi/safi sub commands for bgp. This command
when entered as 'flood disable' will turn off type 3 route
generation for the transmittal of the type 3 route necessary
for BUM replication on the remote VTEP. Additionally it will
turn off the BUM handling via the new zebra command,
ZEBRA_VXLAN_FLOOD_CONTROL.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Scan all bgp vrf instances and respective L3VNI against the VNI which is being configured.
Ticket:CM-21859
Testing Done:
Configure l3vni,
try to configure same vni as l2vni under router bgp, address-family
l2vpn evpn.
The configuration is rejected.
show evpn vni
VNI Type VxLAN IF # MACs # ARPs # Remote VTEPs Tenant VRF
4001 L3 vx-4001 0 0 n/a vrf1
TOR(config)# router bgp 5546
TOR(config-router)# address-family l2vpn evpn
TOR(config-router-af)# vni 4001
% Failed to create VNI
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In order to make EVPN behavior work without special casing
the code, bring the evpn commands under HAVE_CUMULUS into
the fold.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
