The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Received PMSI tunnel attributes (in EVPN type-3 route) were not recognized.
Parse them and display the tunnel type when looking at routes. Note that
the only tunnel type currently supported is ingress replication (IR). A
warning message will be logged if the received tunnel type is something
else, but the attribute is otherwise ignored.
Updates: a21bd7a (bgpd: add PMSI_TUNNEL_ATTRIBUTE to EVPN IMET routes)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
1. Added default gw extended community
2. code modification to handle sticky-mac/default-gw-mac as they go together
3. show command support for newly added extended community
4. State in zebra to reflect if a mac/neigh is default gateway
5. show command enhancement to refelect the same in zebra commands
Ticket: CM-17428
Review: CCR-6580
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Some of the deprecated stream.h macros see such little use that we may
as well just remove them and use the non-deprecated macros.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Move and modify all network input related code to bgp_io.c
* Add a real input buffer to `struct peer`
* Move connection initialization to its own thread.c task instead of
piggybacking off of bgp_read()
* Tons of little fixups
Primary changes are in bgp_packet.[ch], bgp_io.[ch], bgp_fsm.[ch].
Changes made elsewhere are almost exclusively refactoring peer->ibuf to
peer->curr since peer->ibuf is now the true FIFO packet input buffer
while peer->curr represents the packet currently being processed by the
main pthread.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
So we have the ability to apply speculative route-maps to
neighbor display to see what the changes would look like
via some show commands. When we do this we make a
shallow copy of the attr data structure and then pass
it around for applying the routemap. After we've applied
this route-map and displayed it we really need to clean
up memory that the route-map application applied.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A crafted BGP UPDATE with a malformed path attribute length field causes
bgpd to dump up to 65535 bytes of application memory and send it as the
data field in a BGP NOTIFY message, which is truncated to 4075 bytes
after accounting for protocol headers. After reading a malformed length
field, a NOTIFY is generated that is supposed to contain the problematic
data, but the malformed length field is inadvertently used to compute
how much data we send.
CVE-2017-15865
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This issue was discovered on a live session with an extremely
old cisco 7206VXR router running 12.2(33)SRE4. The sending router
is sending us an empty NLRI that is MP_REACH. From RFC
exploration(thanks Russ!) it appears that this was
considered a 'valid' way to send EOR.
Following discussion decided that we should treat
this situation as a EOR marker instead of bringing
down the session.
Applying this fix on the FRR router seeing this issue
allows it to continue it's peering relationship with
the ASR. Since this is a point fix I do not see
a high likelihood of further fallout.
Fixes: #1258
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit 8c9cc7bbf6 changed the size
of the `struct bgp_attr_encap_subtlv` type to be a zero length
array at the end instead of having a 1 byte. All memory allocations
for this subsuquently were off by 1 byte since those were not
adjusted either.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
stlv_last is initialized with the loops. No need to reset it.
Its scope is local to the use with the loops.
Signed-off-by: Vincent Jardin <vincent.jardin@6wind.com>
These are now unused. route-maps can't modify these attributes, so
there is no need for _dup functions.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bgp_attr_deep_dup is based on a misunderstanding of how route-maps work.
They never change actual data, just pointers & fields in "struct attr".
The correct thing to do is copy struct attr and call bgp_attr_flush()
afterwards.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This attempt at optimization has cost us more than a week's worth of
time on several people hunting down the subtle bug that it was missing
an increment on attr->lcommunity.
This is absolutely not worth the maintenance cost.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1) Add hash names to all hash_create calls
2) Fix community_hash, ecommunity_hash and lcommunity_hash key
creation
3) Fix output of community and lcommunity iterators( why would
we want to see the memory location of the backet? ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A prior change broke the nexthop setting for labeled-unicast
address-family in a RFC-5549 scenario (IPv4 prefixes exchanged
with IPv6 next hops). This commit fixes the issue.
Fixes: "bgpd: Fix next hop setting for EVPN"
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Commit c8e7b895 ("bgpd: use Jenkins hash for BGP transit, cluster and
attr hashes") changed attrhash_key_make() to use Jenkins hash, commit
c8f3fe30 ("bgpd: Remove AS Path limit/TTL functionality") introduced
a bogus change with a snippet of code that was deleted in the first
one.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most of the attributes in 'struct attr_extra' allow for
the more interesting cases of using bgp. The extra
overhead of managing it will induce errors as we add
more attributes and the extra memory overhead is
negligible on anything but full bgp feeds.
Additionally this greatly simplifies the code for
the handling of data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
bgpd: Fix missing label set
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement support for sticky (static) MACs. This includes the following:
- Recognize MAC is static (using NUD_NOARP flag) and inform BGP
- Construct MAC mobility extended community for sticky MACs as per
RFC 7432 section 15.2
- Inform to zebra that remote MAC is sticky, where appropriate
- Install sticky MACs into the kernel with the right flag
- Appropriate handling in route selection
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Core EVPN route handling functionality. This includes support for the
following:
- interface with zebra to learn about local VNIs and MACIPs as well as
to install remote VTEPs (per VNI) and remote MACIPs
- create/update/delete EVPN type-2 and type-3 routes
- attribute creation, route selection and install
- route handling per VNI and for the global routing table
- parsing of received EVPN routes and handling by route type
- encoding attributes for EVPN routes and EVPN prefix creation (for
Updates)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
The next hop for EVPN routes must be an IPv4 or IPv6 address as per
RFC 7432. Ensure this is correctly handled. Also, ensure there
are correct checks for AFI_L2VPN and nexthop AFI is not AFI_L2VPN.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
The bpacket_reformat_for_peer() function rewrites the nexthop of outgoing
route updates on a per-peer basis in order to handle route-maps ("set
ip next-hop") and locally-originated routes missing a nexthop.
In the latter case, RFC 4271 says the following: "When announcing a
locally-originated route to an internal peer, the BGP speaker SHOULD use
the interface address of the router through which the announced network
is reachable for the speaker as the NEXT_HOP".
We were doing this for regular IPv4/IPv6 routes, but not for
VPN/EVPN/ENCAP routes, which were being announced with invalid nexthops
(0.0.0.0 or ::).
This patch fixes this problem.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Added bgp_nexthop_afi() to have one place that determines what the
Nexthop AFI is for bgp_packet_mpattr_start()
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
The initial implementation was against draft-keyupate-idr-bgp-prefix-sid-02
This updates our label-index implementation up to draft-ietf-idr-bgp-prefix-sid-05
- changed BGP_ATTR_LABEL_INDEX to BGP_ATTR_PREFIX_SID
- since there are multiple TLVs in BGP_ATTR_PREFIX_SID you can no longer
rely on that flag to know if there is a label-index for the path. I
changed bgp_attr_extra_new() to init the label_index to
BGP_INVALID_LABEL_INDEX
- put some placeholder code in for the other two TLVs (IPv6 and
Originator SRGB)
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- cleaned up the "show bgp ipv4 labeled-unicast x.x.x.x" output
- fixed some json keys to use camelCase
- bgp_attr_label_index() was clearing BGP_ATTR_LABEL_INDEX because it
was comparing mp_update->afi against SAFI_LABELED_UNICAST instead of
mp_update->safi
- added BGP_ATTR_LABEL_INDEX to attr_str
Labeled-unicast updates were being sent with an ipv6 nexthop due to
not setting the mp_nexthop_len or nh_afi. On the receive side, the
prefix length was being incorrectly determined and has been fixed.
Also the stream for bgp_label_buf was not created. All resolved.
Ticket: CM-15260
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by:
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement support for negotiating IPv4 or IPv6 labeled-unicast address
family, exchanging prefixes and installing them in the routing table, as
well as interactions with Zebra for FEC registration. This is the
implementation of RFC 3107.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
To know if overlay index is the same between two route information,
then the two overlay index field is compared. If both fields are set to
null, then the comparison should be equal, then return true, which was
not done.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As per draft-ietf-idr-tunnel-encaps-02, section 3.2.1, BGP Encap
attribute supports vxlan tunnel type. A new tunnel attribute has been
appended to subtlv list, describing the vxlan network identifier to
be used for the routing information of the BGP update message.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces the ability to make route type 5 message
when EVPN is enabled. Picked up paramters are collected from the
bgp extra attribute structure and are the ESI, the ethernet tag
information. In addition to this, nexthop attribute is collected too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch appends nexthop attribute to EVPN message, in addition
to appending gateway IP in RT-5 NLRI itself. In reception, if
both informations are stored, then the GW IP information will
supersede the NLRI nexthop attribute.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The commit introduces the changes to be done to carry route type 5 EVPN
information in bgp extra attribute information. The commit also handles
the update processing for route type 5 information, including ESI,
gatewayIP and label information.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
(to match surrounding code)
"git diff -w" should be almost empty.
Copyright edited to say FRR, this is not GNU Zebra :)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
BGP Large Communities are a novel way to signal information between
networks. An example of a Large Community is: "2914:65400:38016". Large
BGP Communities are composed of three 4-byte integers, separated by a
colon. This is easy to remember and accommodates advanced routing
policies in relation to 4-Byte ASNs.
This feature was developed by:
Keyur Patel <keyur@arrcus.com> (Arrcus, Inc.),
Job Snijders <job@ntt.net> (NTT Communications),
David Lamparter <equinox@opensourcerouting.org>
and Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Job Snijders <job@ntt.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce internal and IANA defintions for AFI/SAFI and mapping
functions and modify code to use these. This refactoring will
facilitate adding support for other AFI/SAFI whose IANA values
won't be suitable for internal data structure definitions (e.g.,
they are not contiguous).
The commit adds some fixes related to afi/safi testing with 'make check
' command.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ticket: CM-11416
Reviewed By: CCR-3594 (mpls branch)
Testing Done: Not tested now, tested earlier on mpls branch
* bgpd parses NLRIs twice, a first pass "sanity check" and then a second pass
that changes actual state. For most AFI/SAFIs this is done by
bgp_nlri_sanity_check and bgp_nlri_parse, which are almost identical.
As the required action on a syntactic error in an NLRI is to NOTIFY and
shut down the session, it should be acceptable to just do a one pass
parse. There is no need to atomically handle the NLRIs.
* bgp_route.h: (bgp_nlri_sanity_check) Delete
* bgp_route.c: (bgp_nlri_parse) Make the prefixlen size check more general
and don't hard-code AFI/SAFI details, e.g. use prefix_blen library function.
Add error logs consistent with bgp_nlri_sanity_check as much as possible.
Add a "defense in depth" type check of the prefixlen against the sizeof
the (struct prefix) storage - ala bgp_nlri_parse_vpn.
Update standards text from draft RFC4271 to the actual RFC4271 text.
Extend the semantic consistency test of IPv6. E.g. it should skip mcast
NLRIs for unicast safi as v4 does.
* bgp_mplsvpn.{c,h}: Delete bgp_nlri_sanity_check_vpn and make
bgp_nlri_parse_vpn_body the bgp_nlri_parse_vpn function again.
(bgp_nlri_parse_vpn) Remove the notifies. The sanity checks were
responsible for this, but bgp_update_receive handles sending NOTIFY
generically for bgp_nlri_parse.
* bgp_attr.c: (bgp_mp_reach_parse,bgp_mp_unreach_parse) Delete sanity check.
NLRI parsing done after attr parsing by bgp_update_receive.
Arising out of discussions on the need for two-pass NLRI parse with:
Lou Berger <lberger@labn.net>
Donald Sharp <sharpd@cumulusnetworks.com>
* bgp_route.h: (bgp_nlri_sanity_check) The bulk of the args are equivalent
to a (struct bgp_nlri), consolidate.
* bgp_route.c: (bgp_nlri_sanity_check) Make this a frontend for all afi/safis.
Including SAFI_MPLS_LABELED_VPN.
(bgp_nlri_sanity_check_ip) Regular IP NLRI sanity check based on the
existing code, and adjusted for (struct bgp_nlri *) arg.
* bgp_attr.c: (bgp_mp_reach_parse) Adjust for passing (struct bgp_nlri *)
to bgp_nlri_sanity_check.
Get rid of special-casing to not sanity check VPN.
(bgp_mp_unreach_parse) Ditto.
* bgp_mplsvpn.c: Use the same VPN parsing code for both the sanity
check and the actual parse.
(bgp_nlri_parse_vpn) renamed to bgp_nlri_parse_vpn_body and made
internal.
(bgp_nlri_parse_vpn_body) Added (bool) argument to control whether it
is sanity checking or whether it should update routing state for each
NLRI. Send a NOTIFY and reset the session, if there's a parsing
error, as bgp_nlri_sanity_check_ip does, and as is required by the
RFC.
(bgp_nlri_parse_vpn) now a wrapper to call _body with update.
(bgp_nlri_sanity_check_vpn) wrapper to call parser without
updating.
* bgp_mplsvpn.h: (bgp_nlri_sanity_check_vpn) export for
bgp_nlri_sanity_check.
* bgp_packet.c: (bgp_update_receive) Adjust for bgp_nlri_sanity_check
argument changes.
* test/bgp_mp_attr_test.c: Extend to also test the NLRI parsing functions,
if the initial MP-attr parsing has succeeded. Fix the NLRI in the
VPN cases. Add further VPN tests.
* tests/bgpd.tests/testbgpmpattr.exp: Add the new test cases.
This commit a joint effort of:
Lou Berger <lberger@labn.net>
Donald Sharp <sharpd@cumulusnetworks.com>
Paul Jakma <paul.jakma@hpe.com> / <paul@jakma.org>
bgp_attr_flag_invalid can access beyond the last element of attr_flags_values.
Fix this by initializing attr_flags_values_max to the correct value.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
