Before this patch, if the first server crashed or was terminated, RPKI
connection keeps _active_ forever.
With this patch, if we catch connection problem (FATAL), we reset RPKI, to
switch to another available RTR-Server by using configured preference.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
(cherry picked from commit 38775a3c5f)
Conversion of bgp error codes returned for cli input into
an enum and then properly handling all the error cases
in bgp_vty_return.
Because not all error codes returned were properly handled
in this function there existed configuration examples that
were accepted on the cli without an error message but not
saved.
Fixes: #10589
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 4b7e23e9f2)
BGP_ERR_PEER_GROUP_MEMBER and BGP_ERR_PEER_GROUP_PEER_TYPE_DIFFERENT
both are not handled by bgp_vty_return, but both can be handled by
this function as that there is nothing special going on here.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 6dcea6fe05)
confederations are checking to see that the bgp pointer
is non-null. But it's impossible to have a null pointer
in the cli and in all paths we have already deref'ed the bgp
pointer. Let's remove that error code as that it is impossible
to happen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 8b4a0b6631)
Add a 15 minute warning to the logging system when
bgp policy is not setup properly. Operators keep asking
about the missing policy( on upgrade typically ). Let's
try to give them a bit more of a hint when something is
going wrong as that they are clearly missing the other
various places FRR tells them about it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit b17826b715)
bgp_attr_default_set creates a new empty aspath. If family error happens,
this aspath is not freed. Move attr initialization after we checked the
family.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 606c3f9fb2)
aspth_empty a couple of lines earlier creates an aspath and it must be
freed.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit afb254d792)
Using memcmp is wrong because struct ipaddr may contain unitialized
padding bytes that should not be compared.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 60cda04dda)
Using memcmp is wrong because struct nexthop may contain unitialized
padding bytes that should not be compared.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit e4190ca4ab)
Description:
Replacing memcmp at certain places,
to avoid the coverity issues caused by it.
Co-authored-by: Kantesh Mundargi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
When setting maximum-prefix-out on peer-group, the applied value on
member is 0.
Fix usage of maximum-prefix-out on peer-group.
The peer_maximum_prefix_out_(un)set functions are derived from
peer_maximum_prefix_(un)set.
Fixes: fde246e835 ("bgpd: Add an option to limit outgoing prefixes")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Specifying a number is not possible with command no neighbor X.X.X.X
maximum-prefix-out
> frr(config-router-af)# no neighbor 192.168.1.2 maximum-prefix-out 1
> % Unknown command: no neighbor 192.168.1.2 maximum-prefix-out 1
This patch allows it.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
In situations where remove-private-AS is configured for eBGP peers
residing in a private ASN, the peer's ASN was not being retained
in the AS-Path which can allow loops to occur. This was addressed
in a prior commit but it only addressed cases where the "replace-AS"
keyword was configured.
This commit ensures we retain the peer's ASN when using
"remove-private-AS" for eBGP peers in a private ASN regardless of other
keywords.
Setup:
=========
router bgp 4200000002
neighbor enp1s0 interface v6only remote-as external
neighbor enp6s0 interface v6only remote-as external
!
address-family ipv4 unicast
neighbor enp6s0 remove-private-AS
exit-address-family
ub18# show ip bgp sum | include 420000
BGP router identifier 100.64.0.111, local AS number 4200000002 vrf-id 0 <<<<< local asn 4200000002
ub20(enp1s0) 4 4200000001 22 22 0 0 0 00:00:57 1 1
ub20(enp6s0) 4 4200000001 21 22 0 0 0 00:00:57 0 1 <<<< peer asn 4200000001
ub18# show ip bgp | include 0.2
Default local pref 100, local AS 4200000002
*> 100.64.0.2/32 enp1s0 0 0 4200000001 4200000004 4200000005 4200000001 i
Before ("remote-private-AS" only):
=========
ub18# show ip bgp neighbors enp6s0 advertised-routes | include 100.64.0.2
*> 100.64.0.2/32 :: 0 i <<<<< empty as-path, no way to prevent loop
After ("remote-private-AS" only):
=========
ub18# show ip bgp neighbors enp6s0 advertised-routes | include 100.64.0.2
*> 100.64.0.2/32 :: 0 4200000001 4200000001 i <<<< retain peer's asn, breaks loop
Ticket: 2857047
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
```
exit1-debian-11(config-router)# neighbor 192.168.100.3 remote-as external
exit1-debian-11(config-router)# do sh run | include extended
exit1-debian-11(config-router)# neighbor 192.168.100.3 capability extended-nexthop
exit1-debian-11(config-router)# do sh run | include extended
neighbor 192.168.100.3 capability extended-nexthop
exit1-debian-11(config-router)# no neighbor 192.168.100.3 capability extended-nexthop
exit1-debian-11(config-router)# do sh run | include extended
exit1-debian-11(config-router)# neighbor eth0 interface remote-as external
exit1-debian-11(config-router)# do sh run | include extended
exit1-debian-11(config-router)# neighbor eth0 capability extended-nexthop
exit1-debian-11(config-router)# do sh run | include extended
exit1-debian-11(config-router)# no neighbor eth0 capability extended-nexthop
exit1-debian-11(config-router)# do sh run | include extended
no neighbor eth0 capability extended-nexthop
exit1-debian-11(config-router)#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Abstract:
- The command "neighbor PEER maximum-prefix-out NUMBER" cannot be applied
without clearing the BGP neighbor.
- Apply the maximum-prefix-out value as soon as it is modified without
clearing the neighbor.
subgroup_update_packet() and subgroup_withdraw_packet() respectively
manages the announcement and withdrawal BGP message to the peer.
subgrp->scount counter counts the number of sent prefixes.
Before the patch, the maximum out prefix limitation was applied in
subgroup_update_packet() in order that subgrp->scount never exceeds the
limit. Setting a limit inferior to the effective number of sent prefix
did not result in sending any withdrawal message to reduce the number of
sent prefixes. Without clearing the BGP neighbor, the limitation only
applied to the announcement of new prefixes when the limitation was
over.
With the patch, the limitation is checked in subgroup_announce_check().
The function is intended to say whether a prefix has to be announced in
regards to the prefix-list, route-map... Now when a maximum-prefix-out
value is changed/removed, the neighbor AFI/SAFI table is re-parsed in
the same way as for the application of route-map, prefix-lists...
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Take into account the maximum-prefix-out value when calculating the
update-group hash.
Fixes: fde246e835 ("bgpd: Add an option to limit outgoing prefixes")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP EVPN custom `union gw_addr` is basically the same thing as a common
`struct ipaddr` but it lacks the address family which is needed in some
cases.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This code is populating a temporary variable `add` instead of the attr.
Initially this variable was later copied to the attr but the copying was
erroneously deleted by 0a50c2481. Directly populate the attr to restore
the correct behavior.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Here we try to compare the new attr with the existing one but this call
compares the existing index with zero instead. attrhash_cmp already
compares indexes using overlay_index_same so this call is both wrong and
useless.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
```
exit1-debian-11# sh ip bgp 10.10.10.10/32
BGP routing table entry for 10.10.10.10/32, version 14
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000, (stale)
192.168.0.2 from 192.168.0.2 (0.0.0.0)
Origin incomplete, metric 0, valid, external, best (First path received)
Last update: Wed Jan 19 17:13:51 2022
Time until Graceful Restart stale route deleted: 117
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
