During the database description exchange process, the slave
releases the last dbdesc packet after router_dead_interval.
This was not implemented in the code.
I have written the function ospf6_neighbor_last_dbdesc_release,
which releases the last dbdesc packet after router_dead_interval.
This change was required as per the conformance test 13.11:
In state Full reception of a Database Description packet from
the master after this interval (RouterDeadInterval) will
generate a SeqNumberMismatch neighbor event.
Associated Parameters
ICMPv6 Packet Listen Time
ICMPv6 Packet Tolerance Factor
ICMPv6 Packet Tolerance Time
OSPFV3 DUT Interface Transmit Delay
OSPF Reset Adjacencies Timeout
Test Actions
1.
2. 3.
ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0, with DUT as slave.
ANVL: Wait (for <RouterDeadInterval> seconds).
ANVL: Send <OSPF-DD> packet from neighbor Rtr-0-A to DIface-0 con- taining:
• •
I-bit field not set M-bit field not set
MS-bit field set
DD sequence number same as the one last sent by ANVL.
. ANVL: Listen (for upto 2 * <RxmtInterval> seconds) on DIface-0.
5. DUT: Trigger the event SeqNumberMismatch and set the neighbor state for neighbor Rtr-0-A to ExStart.
6. DUT: Send <OSPF-DD> packet.
7. ANVL: Verify that the received <OSPF-DD> packet contains:
• I-bit field set
• M-bit field set
• MS-bit field set.
Test Reference
• RFC 5340, s4.2.1.2 p19 Sending Database Description Packets
RFC 2328, s10.8 p104 Sending Database Description Packets.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Force the processing of existing network configurations when VRF is
created, otherwise will be skipped in bgp_static_update().
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
glibc removed its pid cache a while back, and grabbing this from TLS is
faster than repeatedly calling the kernel...
Also use `intmax_t` which is more appropriate for both PID & TID.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since the file targets append one anyway, save them some extra work.
syslog can use `%.*s` since it's "forced" printf by API anyway.
Signed-off-by: David Lamparter <equinox@diac24.net>
printfrr() recently acquired the capability to record start/end of
formatting outputs. Make use of this in the zlog code so logging
targets have access to this information.
(This also records how long the `[XXXXX-XXXXX][EC 9999999]` prefix was
so log targets can choose to skip over it.)
Signed-off-by: David Lamparter <equinox@diac24.net>
`log-filter WORD` was giving me a serious headache since it also matches
`log WORD` due to the way the CLI token handling works. This meant that
a mistyped `log something` command would silently be interpreted as a
filter string, causing me serious headscratching and WTFs until I
figured what was going on.
Remove this UX pitfall so noone else falls into it. (Since the command
was never saved to config, renaming it shouldn't cause trouble.)
[Also I apparently forgot to update the docs when I transferred this
over to the new zlog bits...]
TODO for a rainy day: since we collect all the CLI commands anyway, we
should warn somewhere for "2nd level ambiguous" commands like this.
Signed-off-by: David Lamparter <equinox@diac24.net>
Almost all functions currently marked with pure attribute acquire a
route_node lock. By marking them pure we allow compiler to optimize the
code and not call them when it already knows the return value. This is
completely incorrect.
Only two of eleven functions can be marked as pure. And they still won't
be optimized because they are never called from the same function twice.
Let's remove the ext_pure macro completely to reduce the chance of
repeating this mistake in the future.
Fixes#8866, #8809, #8595, #6992.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
In RFC 2328 seqnumber 0x80000000 is reserved and not used. If an LSA
is received with seqnumber the LSA is now dropped and a debug error log
is printed.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Problem reported that frr-reload.py didn't handle the mac access-list
command correctly, causing reloads to fail. This fix adds the
support for the command as a single line context.
Signed-off-by: Don Slice <dslice@nvidia.com>
when sending nexthop information. We do not need to reset the
last_write_cmd since that is taken care of in the send routine.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
For redistribute commands if route map is set, then route takes it's metric
values from the route map. But in the case that routemap is set but the
metric for the route map is not, then the route metric is set to type-1.
Check if the metric is set for the routemap. If not then set it as per
redistributed default values (type 2)
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
The default values will be set at the time of ospf6_redist_add
similar to ospfv2. Hence the default values will change as well.
Default metric type = E2
Default metic value = 20
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Modify both the default and vrf ospf6 topologies to include a test
where write-multiplier is configured to a non-default value and
the ospf6 neighbors are reset then checked.
Run black on both test files.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
allow amount of work done by read and write threads in a single
invocation to be tuned to between 1 and 100 packets (default 20)
Signed-off-by: Pat Ruddy <pat@voltanet.io>
On transmit and receive calculate the time since the last hello was seen
and log a warning if it is late by more than the hello period.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
queue outgoing lsupdate messages to the interface tx FIFO and schedule
the ospf_write task to deal with them.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
enqueue outgoing dbdesc messages to the end of the tx FIFO and
schedule the ospf6_write task to deal with them.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add per interface fifo and per instance write list as a precursor
to implementing fairer sharing of the ospf6 oscket resources.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
To ensure we read all the datagrams availabe from a socket when the
read task is scheduled, make the read helper return and error or
continue enum and loop unitl an error is received.
This requires the read from the socket to be non blocking
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Take the contents of ospf6_receive and split the funtionality that
deals with a single packet receipt and place it in a separate helper
function.
This is the first step in a refactor process to allow the ospf6_read
task to read until failure.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
This commit fixes the following problem:
- enter the interface node
- move the interface to another VRF
- try to continue configuring the interface
It is not possible to continue configuration because the XPath stored in
the vty doesn't correspond with the actual state of the system anymore.
For example:
```
nfware# conf
nfware(config)# interface enp2s0
<-- move the enp2s0 to a different VRF -->
nfware(config-if)# ip router isis 1
% Failed to get iface dnode in candidate DB
```
To fix the issue, go through all connected vty shells and update the
stored XPath.
Suggested-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
isis_circuit_enable can be called for an already enabled circuit. In this
case we would add the circuit to the area multiple times.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When creating a new area, we're adding all circuits in the same VRF to
this area. We should only add circuits configured with the same tag.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
