- When the connection with the FPM socket is established, iterate through all the
L3VNIs and send all the RMACs for FPM processing zfpm_conn_up_thread_cb"
- We have already handled connection down even in previous commits. When the FPM
connection goes down, empty mac_q and FPM mac info hash table
"zfpm_conn_down_thread_cb"
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
- FPM write thread calls "zfpm_build_updates()" to process mac_q and dest_q and
to write update buffer over the FPM socket.
- "zfpm_build_updates()" processes all the update queues one by one in a while
loop. It will break the while loop and return if Queue processing function
returns "FPM_WRITE_STOP" OR FPM write buffer is full OR all the queues are
empty (no more update to process).
- "zfpm_build_route_updates()" dequeues and processes route nodes from "dest_q".
- "zfpm_build_mac_updates()" dequeues and processes MAC nodes from "mac_q"
- These queue processing functions return with "FPM_WRITE_STOP" if the write
buffer is full. Return value is "FPM_GOTO_NEXT_Q" if enough updates are
processed from this queue and we want to move on to the next queue.
- In each call, a queue processing function will process max
"FPM_QUEUE_PROCESS_LIMIT (10000)" updates to avoid starvation of other queues.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
- Define a hook "zebra_mac_update" which can be registered by multiple
data plane components (e.g. FPM, dplane).
DEFINE_HOOK(zebra_rmac_update, (zebra_mac_t *rmac, zebra_l3vni_t *zl3vni, bool
delete, const char *reason), (rmac, zl3vni, delete, reason))
- While performing RMAC add/delete for an L3VNI, call "zebra_mac_update" hook.
- This hook call triggers "zfpm_trigger_rmac_update". In this function, we do a
lookup for the RMAC in fpm_mac_info_table. If already present, this node is
updated with the latest RMAC info. Else, a new fpm_mac_info_t node is created
and inserted in the queue and hash data structures.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
- FPM MAC structure: This data structure will contain all the information
required for FPM message generation for an RMAC.
struct fpm_mac_info_t {
struct ethaddr macaddr;
uint32_t zebra_flags; /* Could be used to build FPM messages */
vni_t vni;
ifindex_t vxlan_if;
ifindex_t svi_if; /* L2 or L3 Bridge interface */
struct in_addr r_vtep_ip; /* Remote VTEP IP */
/* Linkage to put MAC on the FPM processing queue. */
TAILQ_ENTRY(fpm_mac_info_t) fpm_mac_q_entries;
uint8_t fpm_flags;
};
- Queue structure for FPM processing:
For FPM processing, we build a queue of "fpm_mac_info_t". When RMAC is
added or deleted from zebra, fpm_mac_info_t node is enqueued in this queue
for the corresponding operation. FPM thread will dequeue these nodes one by
one to generate a netlink message.
TAILQ_HEAD(zfpm_mac_q, fpm_mac_info_t) mac_q;
- Hash table for "fpm_mac_info_t"
When zebra tries to enqueue fpm_mac_info_t for a new RMAC add/delete
operation, it is possible that this RMAC is already present in the queue. So,
to avoid multiple messages for duplicate RMAC nodes, insert fpm_mac_info_t
into a hash table.
struct hash *fpm_mac_info_table;
- Before enqueueing any MAC, try to fetch the fpm_mac_info_t from the hash
table first.
- Entry is deleted from the hash table when the node is dequeued.
- For hash table key generation, parameters used are "mac adress" and "vni"
This will provide a fairly unique key for a MAC(fpm_mac_info_hash_keymake).
- Compare function uses "mac address", "RVTEP address" and "VNI" as the key
which is sufficient to distinguish any two RMACs. This compare function is
used for fpm_mac_info_t lookup (zfpm_mac_info_cmp).
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Found that the "show interface brief" command was missing the
ability to specify all vrfs. Added that capability via this
fix.
Ticket: CM-25139
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
FRR has no option for the as-set for aggregate route
under IPV6 address family. Added the command to
configure the as-set option for IPV6.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
If we get a neighbor entry for 5549 failure notice
from the kernel that means that something has probably
gone terribly wrong. Let's notice and not reinstall.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vifi being displayed is just confusing. Display the
actual interface name being used in the mroute.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
show bgp vrfs command is formatted with couple
of things.
show bgp vrfs to inclue bgp vrf instance's
SVI interface.
Move L3vni, RMAC and SVI value in next line.
Ticket:CM-25317
Reviewed By:CCR-8816
Testing Done:
New Output:
TORS1# show bgp vrfs
Type Id routerId #PeersVfg #PeersEstb Name
L3-VNI RouterMAC Interface
DFLT 0 27.0.0.15 2 2 default
0 00:00:00:00:00:00 unknown
VRF 31 45.0.8.2 0 0 vrf3
4003 00:02:00:00:00:4e vlan4003
VRF 35 45.0.2.2 0 0 vrf1
4001 00:02:00:00:00:4e vlan4001
VRF 25 45.0.6.2 0 0 vrf2
4002 00:02:00:00:00:4e vlan4002
Total number of VRFs (including default): 4
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Net prefixes in eigrp update packets is created and read
without check host endianness.
This patch use ntohl and htonl to read and write ip prefix
from and to packet.
Tested: x86, powerpc
Signed-off-by: Pawel Dembicki <p.dembicki@wb.com.pl>
When displaying `show thread poll` data add the
function we are supposed to call when the poll
event happens.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When adding a read/write poll event and we are using a developmental
build add a bit of code to ensure that we do not already have an read
or write event scheduled.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we have a case where have created a fd for i/o and we have
removed the handling thread but still have the fd in the poll
data structure, there existed a case where we would get
the handle this fd return from poll but we would immediately
do nothing with it because we didn't have a thread to hand
the event to.
This leads to an infinite loop. Prevent the infinite loop
from happening and log the problem.
We still need to find the cause of this happening. But
let's prevent the system from melting down in the mean time.
Fixes: #2796
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
notify_data_remote_as4 would contain garbage if optlen == 0, and also
as4 is in host byte order while the notify needs network byte order.
Signed-off-by: David Lamparter <equinox@diac24.net>
The fact that the OpenBSD RB_TREE stuff results in a compiler warning on
OpenBSD - and OpenBSD alone - is pretty funny, I have to say...
Signed-off-by: David Lamparter <equinox@diac24.net>
This is mostly relevant for Solaris, where config.h sets up some #define
that affect overall header behaviour, so it needs to be before anything
else.
Signed-off-by: David Lamparter <equinox@diac24.net>
