The nexthop_vrf should be looked up as appropriate,
If the nexthop_vrf was specified use that, else
use the vrf context of what was passed in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Refine the notion of what FRR considers as "configured" VRF. It is no longer
based on user just typing "vrf FOO" but when something is actually configured
against that VRF. Right now, in zebra, the only configuration against a VRF
are static IP routes and EVPN L3 VNI. Whenever a configuration is removed,
check and clear the "configured" flag if there is no other configuration for
this VRF. When user attempts to configure a static route and the VRF doesn't
exist, a VRF is created; the VRF is only active when also defined in the
kernel.
Updates: 8b73ea7bd479030418ca06eef59d0648d913b620
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-10139, CM-18553
Reviewed By: CCR-7019
Testing Done:
1. Manual testing for L3 VNI and static routes - FRR restart, networking
restart etc.
2. 'vrf' smoke
<DETAILED DESCRIPTION (REPLACE)>
0. move all global EVPN details to 'show evpn [json]' command
1. change "VRF" to "Tenant VRF" in 'show evpn vni'
2. change 'show vrf vni' command to tabular form
and add l3-vni related params to the output
3. show evpn rmac should show refcount only in detailed output
4. show evpn next-hop should show refcount only in detailed output
5. move VRF in 'show evpn l3vni' to the end
6. add num rmacs and num nexthops to show evpn l3vni
7. remove "info" from 'show bgp vrf <> l3vni info'
8. show evpn vni <vni> should show l2vni details or l3 vni details
9. show evpn vni should show both L2 and L3 VNIs
10. show bgp l2vpn evpn - shows all global bgp l2vpn evpn details
11. show bgp l2vpn evpn vni - will show both l2 and l3 vnis
12. show bgp l2vpn evpn vni - should show both l2 and l3 vnis
13. follow camel notation for all json keys
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
On some places of code, the VRF_DEFAULT define was not used. This commit
is ensuring that the macros is well used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Move the code that generates the 'show run' output for
'ip route' to be controlled by the vrf config generation
code. Since it really belongs there.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If the vrf for the nexthop is different than the vrf the
route is in, display the nexthops vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When displaying a specific route and if it has a tag
and if we have turned on realm support notify the user
that a tag value of (1-255) is installed into the kernel
with the realm set.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zserv.c has become a bit of a dumping ground for zebra cli.
I'd like to focus the zserv.c code into it's core functionality
which is handling the zapi interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SELECTED_FIB flag was placed upon the entry that we
have inserted into the kernel. Remove this flag and replace
with a `rib_dest_t` *selected_fib. Just keep track of the
selected_fib as we modify it. This removes allot of
FOREACH_RE loops as that we do not need to find the
entry anymore.
At this point in time I think this is a very minor performance
boost. Most `rib_dest_t` structures do not typically carry
more than 1 route_entry, but the minute you start having more
than one entry you can and will start having significant processing
time spent finding the selected_fib.
A future commit may re-order the route entries and possibly
keep more pointers on `rib_dest_t` to avoid lookup. This
is a bit tricky because of the FIB_OVERRIDE code.
Signed-off-by Donald Sharp <sharpd@cumulusnetworks.com>
Rework of do_show_ip_route caused the 'show ip rpf'
cli to stop working. This put's it back into working
order.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The original clippy implementation used if VTYSH_EXTRACT_PL
was defined or not to know to include as part of the creation
of vtysh.
Follow their lead here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the end user to specify how many packets we want
to process at one time coming down the zapi, before
we yield and let other things process.
This is a Hidden command because it is not necessarily
something that we want end users to be able to play with
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the user to modify the work-queue processing hold time
from 10ms to a value from (0-10000). Make the command hidden
as that it's a semi-dangerous command and it could cause
issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Now it's possible to specify multiple options when viewing the RIB or
FIB.
Example: 'show ip route 192.168.0.0/16 longer-prefixes tag 10 ospf'
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Note: I had to remove one assert in clidef.py in order to fix a build
error when using a preprocessor string (FRR_IP_REDIST_STR_ZEBRA) inside
a DEFPY command. This should be revisited later.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Display uptime for all route types instead of just for RIP,
OSPFv2, ISIS, NHRP, TABLE? and BGP routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability for person issuing 'show ip route...' commands
to see if we've suppressed adding a nexthop to the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we configure a static route pointing to null0 and zebra displays
it with the 'blackhole' keyword in the running configuration, the
frr-reload.py script will have issues. Fix this by introducing the
'static_blackhole_type' enum.
Fixes#1091.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reference counter was introduced in 2001, apparently to solve a
problem with connected routes being added/removed multiple times. The RIB
code changed a lot since then, and giving the current callers of rib_add()
and rib_delete() it's safe to assume that we don't need this anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
blackhole support was horribly broken. cleanup by removing blackhole
stuff from ZEBRA_FLAG_*
introduces support for "prohibit" routes (Linux/netlink only)
also clean up blackhole options on "ip route" vty commands.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Bug introduced a couple of weeks ago by myself. Only happens when the
route has an IP nexthop + a nexthop interface.
Example:
debian(config)# ip route 10.0.1.0/24 172.16.1.10 fake1
debian(config)# do sh run
Building configuration...
[snip]
!
ip route 10.0.1.0/24 172.16.1.10 unknown
!
end
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Whenever an interface is created or deleted in the system, we need to
check whether we have static routes referencing that interface by name.
If so, we need to [un]install these routes.
This has the unfortunate side effect of making static routes with
non-existent interfaces disappear from "show ip route", but I think
that's acceptable (and I don't see a "good" fix for that).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Now we have a single command for IPv4 static routes and another one for
IPv6 static routes (+ one command for IPv4 multicast static routes).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fully specified routes are useful when you need to ensure that the
nexthop address is reachable through the specified interface.
Addresses Issue #641.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a preliminary step to join both functions into one later.
The main idea here is to make these functions have separate arguments
for the nexthop address and the nexthop interface, and adjust the call
sites appropriately. Having an argument that could be a nexthop address
OR a nexthop interface was making the code very hard to follow. With
this simplification, a lot of code duplication was removed and now both
functions look very similar.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We don't need to enforce that the interface exists because the route can
be activated later once the interface becomes available. We already do
this for IPv4 routes and IPv6 routes with both a nexthop address and a
nexthop interface.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- The 'reject' keyword was being lost
- Hide the "ip route A.B.C.D A.B.C.D" config options since these will be
displayed as "ip route A.B.C.D/X"
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ZEBRA_FLAG_SELECTED hasn't been set yet by the time lsp_install is
called. The call path is:
rib_process -> rib_process_add_fib -> zebra_mpls_lsp_install -> lsp_install
but ZEBRA_FLAG_SELECTED is set in rib_process after it calls
rib_process_add_fib. I can't think of anything that it would hurt to
install the LSP regardless of whether ZEBRA_FLAG_SELECTED is set later.
I also cleaned up some UI (json and display the pretty label names
instead of their numeric values).
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This fixes a few problems like this one:
vtysh# show ipv6 route ospf6
Unknown route type
Also, replace SAFI_UNICAST with SAFI_MULTICAST in the "show ipv6 mroute
vrf all" command.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
(Note: the allow_delete thing is called "zebra" on the commandline
because that's the clearest context there, while it is called "FRR" in
the CLI because that's considerably less confusing in a vtysh env.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This provides DMVPN support and integrates to strongSwan. Please read
README.nhrpd and README.kernel for more details.
[DL: cherry-picked from dafa05e65fe4b3b3ed5525443f554215ba14f42c]
[DL: merge partially resolved, this commit will not build.]
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Somewhere in the past we switched from
using the auto-generated redistribute statements
to a non-generated version. This caused us to
loose new protocols to redistribute as they are
added. Put it back.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Conflicts (CLI vs. atol()):
- bgpd/bgp_vty.c
- ospfd/ospf_vty.c
- zebra/zebra_vty.c
NB: pull req #65 (LabNConsulting/working/2.0/afi-safi-vty/c) was
excluded from this merge.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Due to the usage of atol, values that are larger than
2 billion on arm for tag are not converted correctly.
Ticket: CM-14099
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All of the autogenerated macros in lib/route_types.pl are now called
FRR_* instead of QUAGGA_*.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Doesn't make sense to fully configure a static route and then
specify that it should be rejected. Remove & rename relevant
commands.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
There's no need to duplicate the 'vrf_id' and 'name' fields from the 'vrf'
structure into the 'zebra_vrf' structure. Instead of that, add a back
pointer in 'zebra_vrf' that should point to the associated 'vrf' structure.
Additionally, modify the vrf callbacks to pass the whole vrf structure
as a parameter. This allow us to make further simplifications in the code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Also, for some reason we had two functions to search a VRF by its name:
zebra_vrf_lookup_by_name() and zebra_vrf_list_lookup_by_name(). The first
one would loop through vrf_table and the other one through vrf_list. This
is not necessary anymore, so remove zebra_vrf_lookup_by_name() and rename
zebra_vrf_list_lookup_by_name() to zebra_vrf_lookup_by_name().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since we're already using a red-black tree to store VRFs sorted by their
vrf_id's, create a new tree to store VRFs sorted by their names.
The biggest advantage of doing this is that we reduce the time complexity
of vrf_list_lookup_by_name() from O(n) to O(log n).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
zvrf_list doesn't need to exist, it's basically a duplicate version
of vrf_list.
Also, zebra_vrf_delete() wasn't removing zvrf from zvrf_list, which was
a bug.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When configuring v6 static routes, allow it to gracefully
ignore mpls commands when mpls is not turned on in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When mpls is not turned on in the kernel, we
are not installing the mpls commands into the cli.
This results in vtysh attempting to run the command
and receiving a 'WTF is this command' back from zebra.
Modify the mpls code to install commands and to check
to see if the command should be accepted based
upon mpls working or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Added the capability of defining an ipv6 static route to null0,
similar to the support previously in ipv4 only.
Ticket: CM-5794
Signed-off-by: Don Slice
Reviewed By: CCR-5223
Testing Done: Manual tested added to the ticket and bgp and ospf smoke
successfully completed
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When pulling forward the zebra_vty.c changes I accidently dropped
these changes from earlier commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Refactor the 'no ipv6 route XXXX' commands to
work under the new cli and to collapse the code
to a much smaller set.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Rework the 'no ip route XXXX' commands to use the new cli
and collapse all DEFUN's that we could into a much smaller
set of commands.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert all 'ip route XXXX' commands to use the new syntax and
collapse all functions that we can easily do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Sam Tannous <stannous@cumulusnetworks.com>
Ticket:
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To keep things simple, zebra's code should be the same whether MPLS
is enabled or not. Then, when MPLS is not enabled, we just disable all
MPLS CLI commands. This way we don't need to add a lot of #ifdef cruft
in zebra's core, improving code readability.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This patch installs labeled static routes in the FIB. The routes are installed
using the RTA_ENCAP (and RTA_ENCAP_TYPE) nested attributes.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6040
Reviewed By: CCR-3091
Testing Done: Tested in SE-1, brief manual testing now
Introduce ability to configure static routes with labels. Only supported for
IPv4.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6040
Reviewed By: CCR-3090
Testing Done: Testing in SE-1
