Work to handle the route-maps, namely the header changes in zebra_vrf.h
and the mapping of using that everywhere
Signed-off-by: vishaldhingra vdhingra@vmware.com
Wrapper the get/set of the table->info pointer so that
people are not directly accessing this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Debugging inactive nexthops in zebra can be quite difficult
and non-obvious what has gone wrong. Add detailed rib
debugs for the cases where we decide that a nexthop is
inactive so that we can more easily debug a reason
for the failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The _route_entry_dump function was not handling the nexthop as passed
in from an upper level protocol appropriate and as such not displaying
the v4/v6 nexthop right in the case where we have both going.
Additionally dump the nexthop vrf as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For OpenFabric operation, we need to be able to install routes via
interfaces without any IPv4 addresses configured. Introduce a flag
ZEBRA_FLAG_ONLINK which upper protocols can set on a route they send
towards zebra, to force the nexthops to be considered onlink.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
* Check for the modified routemap in zebra_route_map_process_update_cb()
* Added zebra_rib_table_rm_update() for RIB routemap processing
* Added zebra_nht_rm_update() for NHT routemap processing
Signed-off-by: kssoman <somanks@vmware.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow protocols to specify to zebra that they would like zebra
to use the distance passed down as part of determine sameness for
Route Replace semantics.
This will be used by the static daemon to allow it to have
backup static routes with greater distances.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is the start of separating out the static
handling code from zebra -> staticd. This will
help simplify the zebra code and isolate static
route handling to it's own code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit a2ca67d1d2 consolidated IPv4 and IPv6 handling. It also applied
our ignorance for IPv4 srcdest routes onto IPv6.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a bit of code to allow return of data plane
request messages.
Add the ability to pass the result back to callers
of kernel_route_rib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SOUTHBOUND_XXX enum was named a bit poorly.
Let's use a bit better name for what we are trying to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add to zebra route-maps the ability to match on a source-instance
route-map FOO deny 55
match source-instance 5
route-map FOO permit 60
ip protocol any route-map FOO
This will match any protocol route installation with a source-instance of 5.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
zserv.c has become something of a dumping ground for everything vaguely
related to ZAPI and really needs some love. This change splits out the
code fo building and consuming ZAPI messages into a separate source
file, leaving the actual session and client lifecycle code in zserv.c.
Unfortunately since the #include situation in Zebra has not been paid
much attention I was forced to fix the headers in a lot of other source
files. This is a net improvement overall though.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The code to reinstall self originated routes was not behaving
correctly. For some reason we were looking for self originated
routes from the kernel to be of type KERNEL. This was probably
missed when we started installing the route types. We should
depend on the self originated flag that we determine from
the callback from the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
There were a few cases where we were not properly de-registering
the static nexthops passed to us. This was important when
the static route was being removed for whatever reason that
we did not leave slag for the nexthop tracking.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
PR #1739 added code to leak routes between (default VRF) VPN safi and unicast RIBs in any VRF. That set of changes included temporary CLI including vpn-policy blocks to specify RD/RT/label/&c. After considerable discussion, we arrived at a consensus CLI shown below.
The code of this PR implements the vpn-specific parts of this syntax:
router bgp <as> [vrf <FOO>]
address-family <afi> unicast
rd (vpn|evpn) export (AS:NN | IP:nn)
label (vpn|evpn) export (0..1048575)
rt (vpn|evpn) (import|export|both) RTLIST...
nexthop vpn (import|export) (A.B.C.D | X:X::X:X)
route-map (vpn|evpn|vrf NAME) (import|export) MAP
[no] import|export [vpn|evpn|evpn8]
[no] import|export vrf NAME
User documentation of the vpn-specific parts of the above syntax is in PR #1937
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
the rib_wib_table function was uncalled by anyone remove
and additionally remove it's static function it called.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive an arbitrary table over the netlink bus
save it for later perusal and sweep any routes that
we may have created from an earlier run.
The current redistribute code is limited to
ZEBRA_KERNEL_TABLE_MAX. I left this alone for the
moment because I believe it needs to be converted
to a RB tree instead of a flat array. Which is more
work for the future. Additionally this proposed
change might necessitate some cli changes or rethinks.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It is possible for clients to install routes into tables
that they desire. Modify the code to delete these routes
from these tables as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There were several places where when I am attempting
to debug zebra functionality that I would really
like to have the ability to know what vrf I think
I am operating on.
Add the vrf_id to a bunch of zlog_debug messages
to help figure out issues when they happen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Also modify `struct route_entry` to use nexthop_groups.
Move ALL_NEXTHOPS loop to nexthop_group.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a interested party removes one of it's routes let
it know that it has happened as asked for.
Add a ZAPI_ROUTE_REMOVED to the send of the route_notify_owner
Add a ZAPI_ROUTE_REMOVE_FAIL to the send of the route_notify_owner
Add code in sharpd to notice this and to allow it to keep
track of routes removed for that invocation and give timing
results.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement support for EVPN symmetric routing for IPv6 routes. The next hop
for EVPN routes is the IP address of the remote VTEP which is only an IPv4
address. This means that for IPv6 symmetric routing, there will be IPv6
destinations with IPv4 next hops. To make this work, the IPv4 next hops are
converted into IPv4-mapped IPv6 addresses.
As part of support, ensure that "L3" route-targets are not announced with
IPv6 link-local addresses so that they won't be installed in the routing
table.
Signed-off-by: Vivek Venkatraman vivek@cumulusnetworks.com
Reviewed-by: Mitesh Kanjariya mitesh@cumulusnetworks.com
Reviewed-by: Donald Sharp sharpd@cumulusnetworks.com
