the default vrf name was hardset to "Default", whereas the default vrf
name could have been configured in an other manner. Fix this
inconsistency.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the l3vni structure is allocated only once, since that structure is only
used for default netns. For that, move the initialisation part is moved
to a proper place, where there is no risk of attempting to initialise it
more than once, even when vrf backend is netns.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Clear dup address vni needs to return non-zero value
in case of command is not successful.
Ticket:CM-23122
Testing Done:
run clear command and check upon failure return code is non-zero.
root@TORS1:~# vtysh -c "clear evpn dup-addr vni 1000 ip 45.0.1.26"
% Requested IP's associated MAC 00:01:02:03:04:05 is still in duplicate
% state
root@TORS1:~# echo $?
1
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Change helps display detailed output for all possible VNI neighbors
without specifying VNI and ip. It helps in troubleshooting as a single
command can be fired to capture detailed info on all VNIs.
Ticket: CM-22832
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8034
Change helps display detailed output for all possible VNI MACs without
specifying VNI or mac. It helps in troubleshooting - a single
command can be fired to capture detailed info on all VNIs.
Also fixed and existing json related bug where json object is created by
a parent function and freed in child function.
Ticket: CM-22832
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8028
Change helps display detailed output for all possible VNIs without
specifying VNI. It helps in troubleshooting - a single command can
be fired to capture detailed info on all VNIs.
Ticket: CM-22831
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8013
Display following Per MAC and Neigh's output:
If duplicate address detection is under process,
display detection start time and detection count.
If duplicate address detection detected an address
as duplicate, display detection time and duplicate
status.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When the remote mac is deleted by bgpd we can end up with an auto mac
entry in zebra if there are neighs referring to the mac. The remote sequence
number in the auto mac entry needs to be reset to 0 as the mac entry may
have been removed on all VTEPs (including the originating one).
Now if the MAC comes back on a remote VTEP it may be added with MM=0 which
will NOT be accepted if the remote seq was not reset in the previous step.
Ticket: CM-22707
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
This is a fixup to commit -
f32ea5c07 - zebra: act on kernel notifications for remote neighbors
The original commit handled a race condition between kernel and zebra
that would result in an inconsistent state i.e.
kernel has an offload/remote neigh
zebra has a local neigh
The original commit missed setting the neigh to active when zebra
tried to resolve the inconsistency by modifying the local neigh to
remote neigh on hearing back its own kernel update. Fixed here.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-22700
When events cross paths between bgp and zebra bgpd could end up with a
dangling local MAC entry. Consider the following sequence of events on
rack-1 -
1. MAC1 has MM sequence number 1 and points to rack-3
2. Now a packet is rxed locally on rack-1 and rack-2 (simultaneously) with
source-mac=MAC1.
3. This would cause rack-1 and rack-2 to set the MM seq to 2 and
simultaneously report the MAC as local.
4. Now let's say on rack-1 zebra's MACIP_ADD is in bgpd's queue. bgpd
accepts rack-3's update and sends a remote MACIP add to zebra with MM=2.
5. zebra updates the MAC entry from local=>remote.
6. bgpd now processes zebra's "stale local" making it the best path.
However zebra no longer has a local MAC entry.
At this point bgpd and zebra are effectively out of sync i.e. bgpd has a
local-MAC which is not present in the kernel or in zebra.
To handle this window zebra should send a local MAC delete to bgpd on
modifying its cache to remote.
Ticket: CM-22687
Reviewed By: CCR-7935
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The `struct zebra_ns` data structure is being used
for both router information as well as support for
the vrf backend( as appropriate ). This is a confusing
state. Start the movement of `struct zebra_ns` into
2 things `struct zebra_router` and `struct zebra_ns`.
In this new regime `struct zebra_router` is purely
for handling data about the router. It has no knowledge
of the underlying representation of the Data Plane.
`struct zebra_ns` becomes a linux specific bit of code
that allows us to handle the vrf backend and is allowed
to have knowledge about underlying data plane constructs.
When someone implements a *bsd backend the zebra_vrf data
structure will need to be abstracted to take advantage of this
instead of relying on zebra_ns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the modification of whether or not we will allow
BUM flooding on the vxlan bridge. To do this allow
the upper level protocol to specify via the ZEBRA_VXLAN_FLOOD_CONTROL
zapi message.
If flooding is disabled then BUM traffic will not be forwarded
to other VTEP's.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The block comments from a couple commits were not following
proper style. Fix.
Fix SA warning that had snuck in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that when the is_router condition changes for a locally learnt
neighbor, it is informed to BGP only if it is active i.e., the MAC is
also locally learnt.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
1. Failed test
2. vxlan_routing_test.py
Use boolean variables instead of unsigned int for certain VxLAN-EVPN
flags which are really used as boolean.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
Along with a subsequent, related commit
When a remote MAC goes away, but there are neighbors referring to it,
ensure that when the last remote neighbor goes away, the MAC is
uninstalled from the kernel and no longer considered as remote.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22130
Reviewed By: CCR-7777
Testing Done:
1. Replicated failed scenario and verified with fix.
2. evpn-min
When a MAC moves from local to remote, a replace is allowed, EVPN
no longer has to delete the local MAC before installing the remote
MAC.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
The RB-Tree used to store rmac information was not properly
handling the v6 address family. Modify the code to allow
this handling.
Cleans up this error message:
zebra[2231]: host_rb_entry_compare: Unexpected family type: 10
That is being seen, This fixes some connectivity issues being seen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
