Update neighbor entries and rule entries to have the RTPROT_ZEBRA
protocol value. So we can tell where things come from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This change addresses the following :
1. Ensures zlog_debug should be under DEBUG macro check
2. Ensures zlog_err and zlog_warn wherever applicable.
3. Removed few posivite logs from fpm handling, whose frequency is high.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
when a client disconnects, we iterate over the routing table to
remove any label that originated from that client. However we
were erroneously passing the route type to the function, while
it was expecting the lsp type. As a result, for example, killing
ldpd would not remove the ldp labels from the routes.
Kudos to @rwestphal for pointing me to the source of the issue.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
User pass the string match large-community 1 exact-match from CLI.
Now route map lib has got the string as "1 exact-match". It passes the string
to call back for compilation. BGP will parse this string and came to know
that for "1" it has to do exact match. Routemap lib has to save "1" in it’s
dependency table. Here routemap is saving this as a “1 exact-match”
which is wrong. The solution is used the compiled data.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
When selecting a new best route, zebra sends a redist update
when the route is installed. There are cases where redist
clients may not see that redist add - clients who are not
subscribed to the new route type, e.g. In that case, attempt
to send a redist delete for the old/previous route type.
Revised the redist delete api to accomodate both cases;
also tightened up the const-ness of a few internal redist apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a bit of extra command `show ip route summary table XXX`
To allow end user to specify a specific table that they want
summary information on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If the nexthop is of type `GATEWAY_IFINDEX` then the nexthop
should not resolve to a nexthop that has a different ifindex
from the one given.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Use the zserv_client_close hook to cleanup all MPLS labels advertised
by a zclient when it disconnects. We were doing this cleanup for
ldpd only, but now we have other daemons that are MPLS aware,
like ospfd (due to the new Segment Routing feature).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
SR support for IS-IS is coming so we need to be able to distinguish
OSPF and IS-IS LSPs.
While here, add missing case statement for LDP on
lsp_type_from_re_type().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some netlink-facing code used for evpn/vxlan programming was
being run in the dataplane pthread, but accessing zebra core
datastructs. Move some additional data into the dataplane
context, and use it in the netlink path instead.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Everywhere else in the code we use GNU_LINUX, that is the symbol we actualy define in the configuration. Don't rely on compiler's built-in symbols.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
frr_with_mutex(...) { ... } locks and automatically unlocks the listed
mutex(es) when the block is exited. This adds a bit of safety against
forgetting the unlock in error paths & co. and makes the code a slight
bit more readable.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conver these functions:
route_map_add_match
route_map_delete_match
route_map_add_set
route_map_delete_set
To return the `enum rmap_compile_rets` and ensure all functions
that use this code handle all the enumerated possible returns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We agreed on this several weeks ago on the weekly call, I just forgot to
actually put it in a PR...
A call for any Protobuf FPM users to raise their hand came up empty on
both the mailing list as well as Slack. Let's see if this gets any
response. If not, it'll be time to remove Protobuf FPM.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
even if vty commands were available, the default resolution command was
working only for the first vrf configured. others were ignored. Also,
for nexthop, resolution was working for all vrfs, and not the specific
one.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Move neighbor programming to the dataplane; remove
old apis; remove some ifdef'd use of direct netlink
code points, using neutral values outside of the netlink-
specific files.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
re->nexthop_num and re->nexthop_active_num are calculated while rib
processing. Also It helps in encoding the ZAPI message.
It's good to dump these parameters also, when the system is in
abnormal state.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
When resolving a nexthop, append its labels to the one its
resolving to along with the labels that may already be present there.
Before we were ignoring labels if the resolving level was greater than
two.
Before:
```
S> 2.2.2.2/32 [1/0] via 7.7.7.7 (recursive), label 2222, 00:00:07
* via 7.7.7.7, dummy1 onlink, label 1111, 00:00:07
S> 3.3.3.3/32 [1/0] via 2.2.2.2 (recursive), label 3333, 00:00:04
* via 7.7.7.7, dummy1 onlink, label 1111, 00:00:04
K>* 7.7.7.7/32 [0/0] is directly connected, dummy1, label 1111, 00:00:17
C>* 192.168.122.0/24 is directly connected, ens3, 00:00:17
K>* 192.168.122.1/32 [0/100] is directly connected, ens3, 00:00:17
ubuntu_nh#
```
This patch:
```
S> 2.2.2.2/32 [1/0] via 7.7.7.7 (recursive), label 2222, 00:00:04
* via 7.7.7.7, dummy1 onlink, label 1111/2222, 00:00:04
S> 3.3.3.3/32 [1/0] via 2.2.2.2 (recursive), label 3333, 00:00:02
* via 7.7.7.7, dummy1 onlink, label 1111/2222/3333, 00:00:02
K>* 7.7.7.7/32 [0/0] is directly connected, dummy1, label 1111, 00:00:11
C>* 192.168.122.0/24 is directly connected, ens3, 00:00:11
K>* 192.168.122.1/32 [0/100] is directly connected, ens3, 00:00:11
ubuntu_nh#
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since we are now away from the dual use of the destination field, there
is no need to single out /32 addresses as broadcast. This was bugged
anyway, since the same /32 criteria was used for IPv6 addresses as well,
when `connected_check_ptp` is called in `connected_delete_ipv6`.
Fixes: 3053
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
