Add "show motd" commad.
The vtysh user can call the "show motd" command to re-show the welcome message.
This is necessary if the user saves frequently used commands in motd.
Signed-off-by: Sergei Rozhkov <gh@zserg.ru>
Use %pI4/%pI6 where possible, otherwise at least atjust stack buffer sizes
for inet_ntop() calls.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
bgp_pcount_adjust() is called only when calling bgp_path_info_set_flag().
Before this patch the pcount is not advanced before checking for overflow.
Additionally, print:
```
[RZMGQ-A03CG] 192.168.255.1(r1) rcvd UPDATE about 172.16.255.254/32 IPv4 unicast -- DENIED due to: maximum-prefix overflow
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The ospf6_route_cmp_nexthops function was returning 0 for same
and 1 for not same. Let's reverse the polarity and actually make
the returns useful long term.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Every 1/2 hour my logs are filling up with this:
2022-11-26 13:54:47.531 [DEBG] ospfd: [P4PQ9-K4XFD] DR-Election[1st]: Backup 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [HBZ7F-65Y86] DR-Election[1st]: DR 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [H01MF-RN00N] DR-Election[2nd]: Backup 0.0.0.0
2022-11-26 13:54:47.531 [DEBG] ospfd: [R7BJ4-KP8JT] DR-Election[2nd]: DR 192.168.119.229
This should be guarded by an if check to ensure that the operator really
wants to see this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
My log file is filling up with:
2022-11-26 13:24:47.532 [DEBG] ospfd: [RY794-DQ7AK] interface 192.168.119.229 [2] join AllDRouters Multicast group.
Every 1/2 hour. There is nothing an operator needs to do here and nothing
that they can change. Let's guard this output.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
add a test dedicated to confederation. it also take into
account the support of AS memberwith same id that the
confederation id.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Add some `pragma`s to handle errors that the C/C++ extension is not able
to understand.
Move `TRANSPARENT_UNION` to `lib/compiler.h` for consistency.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If we enable MPLS for an interface via sysctl, we should write `mpls enable`,
not `mpls`.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Since the `echo PING` commands are from watchfrr and are sent
a whole bunch when an operator has `log commands` on the amount
of logging done is quite significant.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The recent tracepoint additions in c317d3f246
did not properly setup the tracepoints for lttng. Fix this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Simplify all DEFUNs by moving all logic to the northbound translation
function and transforming all function parameters into a single
structure.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
currently the following configuration
dut:
!
interface ntfp2
ip router isis 1
!
router bgp 200
no bgp ebgp-requires-policy
bgp confederation identifier 300
bgp confederation peers 300
neighbor 192.168.1.1 remote-as 100
neighbor 192.168.2.2 remote-as 300
!
address-family ipv4 unicast
neighbor 192.168.2.2 default-originate
exit-address-family
!
router isis 1
is-type level-2-only
net 49.0001.0002.0002.0002.00
redistribute ipv4 connected level-2
!
end
router:
!
interface ntfp2
ip router isis 1
isis circuit-type level-2-only
!
router bgp 300
no bgp ebgp-requires-policy
bgp confederation identifier 300
bgp confederation peers 200
neighbor 192.168.2.1 remote-as 200
neighbor 192.168.3.2 remote-as 400
!
address-family ipv4 unicast
network 3.3.3.0/24
exit-address-family
!
router isis 1
is-type level-2-only
net 49.0001.0003.0003.0003.00
redistribute ipv4 connected level-2
!
end
on dut result of show bgp ipv4 unicast command is:
show bgp ipv4 unicast
BGP table version is 1, local router ID is 192.168.2.1, vrf id 0
Default local pref 100, local AS 200
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 192.168.1.1 0 0 100 i
instead of
sho bgp ipv4 unicast
BGP table version is 3, local router ID is 192.168.2.1, vrf id 0
Default local pref 100, local AS 200
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 192.168.1.1 0 0 100 i
*> 3.3.3.0/24 192.168.2.2 0 100 0 (300) i
*> 4.4.4.0/24 192.168.3.2 0 100 0 (300) 400 i
Displayed 3 routes and 3 total paths
According to RFC 5065:the usage of one of the member AS number as the
confederation identifier is not forbidden.
fixes are the following
in bgp_route.c:
in bgp_update remove the test for presence of confederation id in
as_path since, this case is allowed;
in bgp_vty.c
bgp_confederation_peers, remove the test on peer as value
in bgpd.c
bgp_confederation_peers_add
remove the test on peer as value
invert the order of setting peer->sort value and peer->local_as,
since peer->sort is depending from current peer->local_as value
bgp_confederation_peers_remove
invert the order of setting peer->sort value and peer->local_as,
since peer->sort is depending from current peer->local_as value
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
This commit adds a new option to control whether a VRRPv3 group
accepts / computes its checksum with a prepended IPv4 pseudoheader.
This should improve interoperability with other devices.
Signed-off-by: Siger Yang <siger.yang@outlook.com>
Commit 8f359e1593 removed a check that prevented the same route
from being added twice. In certain topologies, that change resulted in
the following infinite loop when adding an ASBR route:
ospf6_route_add
ospf6_top_brouter_hook_add
ospf6_abr_examin_brouter
ospf6_abr_examin_summary
ospf6_route_add
(repeat until stack overflow)
Revert the offending commit and update `ospf6_route_is_identical()` to
not do comparison using `memcmp()`.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Before this patch, data is flushed, and we can't see the data after we send
the notification.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
