Ensure that if allocated route is not added to a table then it is
deleted to avoid leaking memory.
Add a new memory type for route table so that ospf6 routes can be
distinguished in the show memory output in isolation.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
When an "export-filter" or "filter-list out" was configured on an area the
filter was not applied to existing database. The user would either have
to restart the neighboring router in the other area or issue a "clear ipv6
ospf6 interface" to cause the neighbor router to resend it's LSAs. The
new filter would then be applied to these LSAs and permit or deny summary
LSAs from being added/removed from the database. The code now applies the
filters to the existing database without user needing to take any action
to clear ospfv3 adjacencies.
The second part of the problem was if a rule changed the updated filter was
not applied. The code has been modifed to now process the rule update and
reapply the filter.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Issue: When a path in the inter area ecmp route is deleted, the route is removed
Fix: The fix is to remove the specific path from the inter area route using
ospf6_abr_old_route_remove() when abr route entry is not found.
In the function ospf6_abr_old_route_remove() the path to be removed needs
to match adv router and link state ID
Fixed memory leak in ospf6_intra_prefix_update_route_origin() caused by
route node lock not getting released.
Signed-off-by: kssoman <somanks@gmail.com>
gcc 10 complains about some of our format specs, fix them. Use
atomic size_t in thread stats, to work around platform
differences.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
1. All the changes are related to handle ospf6 with different vrf.
2. The dependancy of global ospf6 is removed.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>
Signed-off-by: harios_niral <hari@niralnetworks.com>
1. Removed the VRF_DEFAULT dependency from ospf6d.
2. The dependency on show command still exist
will be fixed when the ospf6 master is available.
Co-authored-by: Harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Processing loop uncovered when there are multiple ABRs also
acting as ASBRs into the same area in ospf6. The problem
was that when looking thru the list of Inter-area router
entries, if the current entry being processed matched, it
still merged next-hops and re-initiated the process. In
this fix, if the route/path matches and the next-hops also
match, there is no need to re-initiate the examine process.
Ticket: CM-28900
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
We are seeing this crash:
New LWP 7673]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospf6d -d -F datacenter -M snmp -A ::1'.
Program terminated with signal SIGABRT, Aborted.
(gdb) bt
vtysh=vtysh@entry=0) at lib/command.c:1288
(gdb)
The command entered is `debug ospf6 lsa inter-router examin`. Code
inspection leads us to the fact that FRR is declaring the data as
const but we are attempting to modify it, causing the crash.
Remvoe the const of this set/get and let things work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ABR summary should contain best intra prefix LSA.
There might be a case where intra-prefix route with different
cost from different advertising router present, summary
advertisement should only consider best intra-prefix route.
A route which is marked for remove, while purging the route's
ABR summary LSA also remove summary route from the summary
table.
Ticket:CM-22665
Testing Done:
Validate on ABR topology, intra-prefix route with
different cost, a higher cost intra-prefix route skip from sending
ABR summary LSA.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The dead code has been disabled with '#if 0', in a similar way to other
disabled logs in the same function.
Signed-off-by: F. Aragon <paco@voltanet.io>
It should have the same behavior when debug not enabled, and slightly
different behavior when debug enabled (previously dead code now should
show debug messages in debug mode)
Signed-off-by: F. Aragon <paco@voltanet.io>
Inter Area Prefix LSA ECMP is not working properly.
Two ABRs advertising IAP routes to backbone, not installed
with correct cost or if ABR restarted the route is removed
from backbone.
The current implementation ABR was not suppressing IAP update
for prefix cost is not better or route is not installed.
The better cost or path route was overwritten with non optimal
cost. This caused a loop with nexthops pointing each other
at backbone and non-backbone routers.
Consider to only send BEST/installed route's IAP notification
at ABRs.
When receiving IAP update from multiple ABRs, preserve multiple
advertising routers under the prefix route node.
Upon LSA maxage only remove the advertising route's which is
impacted and update route's nexthops and update FIB.
Testing Done:
Top to Bottom is part of area 0 on the Right, and
from Left side in area 1.
Top and Bottom act as ABRs.
H1 route is sent as Inter-Area Prefix to Right.
Trigger multiple triggers for ABR routes.
1) Shutting down link between, top to right to eliminate nhs
2) Restart frr at Top.
3) Restart frr at Right.
+-----------+
. |
,'| Top |`.
/ . | \
,' ,'+.----------+`. `.
/ / ` `. \ ',
,' ,' ,' \ `. .
- / ` `. ', `,
,` ,` ,' \ \ \
' - ` `. `, `,
+--------+ +--`--`--`--+ +---'---'--'+ +--------+
| | | | | | | |
| H1 ------ Left | | Right ------ H2 |
| | | | | | | |
+--------+ +-----------+ +----.--,-,-+ +--------+
`. ` \ - / /
\ `. ` ,' .` `
' . \ / / '
`. \ `. ` / ,'
\ ` . ,` / /
`. `. . / / /
\ . \ ,' ' /
' '--'--------+,'.`
`.| - /
' mid1 |/
| -
+-----------+
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
During Intra brouter calculation, brouters will be
marked for remove. if one of the brouter is removed,
as part of its remove callback, ospf6_abr_examin_summary
is performed where marked for brouter would be removed.
Since refcount of next brouter node still higher, it will
retain one node with dangled next brouter pointer.
When intra brouter calculation iteration goes to next node,
where accessing free node causes a crash.
Ticket:CM-20807
Testing Done:
Configure multilple ABR routers between area 0 and area x, y.
Remove ospf6 configuration on area x, y abrs and check area 0
Intra brouter calculations.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Avoid duplicate ABR brouter entry and
its nexthops.
The route lookup results in first element of the
route/redix node. In case of Intra and inter area
brouter, the first element always intra brouter.
the first element comparison results in always addition
of new element for inter area brouter in brouter table.
Now, iterate all elements of the route node and compare
for brouter origin, if it is same simply update its
nexthops to FIB.
brouter and brouter route nexthops should be merge to avoid
duplicate nexthops for the inter area routes.
Ticket:CM-20807
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When two routers from same area connected to backbone,
intra route advertised from area x should take precedence
within area x. The same route would be injected as summary
lsa to area 0/y. The same LSA via second abr injected back to
area x and since area 0 is lower than area x its route take
precedence.
Move the area check below path type and cost as both are crucial
to determine best route.
Ticket:CM-19627
Testing Done:
Initial route generated via area 1 as Intra-Prefix LSA (2009).
R1 and R2 both re advertised Inter Area Prefix LSA
(Summary LSA 2003) to area 1.
With the change area 1 Intra route precedence is preserved.
The address of H1 from Right is reachable via ping.
area 1 | area 0
R1
/ \
/ \
/ \
H1 --Left Right
\ /
\ /
\ /
R2
area 1 | area 0
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
During Intra area border router calculation, all
border routers are marked for remove from brouter table.
Once SPF calculation is done, retain inter area
border router if the adv. intra border router (abr)
is present in SPF table.
Ticket:CM-20171
Testing Done:
Validated inter area ASBR (L1) is retained at
R1 and R2 post intra border router calculation.
L1 -- (area 1)-- L2 -- (area 0) -- R1 --- R2
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Handle RFC 2328 16.4 Calculating AS external routes with ECMP
For ASBR route, if it is learnt via new LSA and contains
different nexthop list. First lookup route in ospf6 route table
if it exists, merge nexthop list to existing and call the callback
to install into FIB (zebra). Delete created new route as it is
identical to existing entry in route table.
Ticket:CM-16139
Testing Done:
Run two ASBR with 2 ECMP paths from each
DUT neighbor receievs 4 ECMP path to a external route.
ospf6 installs all 4 ECMP path to FIB/RIB
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Avoid show() methods from being a NULL function when it is called.
Meanwhile, I did const'ify the handlers so only its debug field can be changed.
Signed-off-by: Vincent Jardin <vincent.jardin@6wind.com>
Register add/delete hooks with the prefix list code to properly change
ospf6_area's prefix list in/out pointers.
There are 2 other uncached uses of prefix lists in the ASBR route-map
code and the interface code; these should probably be cached too. (To
be fixed another day...)
Fixes: #453
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
