I agree with the PR review from mstap and merged
the following two functions into one.
- zapi_nexthop_seg6_cmp
- zapi_nexthop_seg6local_cmp
[note]
If both of them have more complex extensions in the future,
I think it will be less confusing to remove the integration
of these functions and make them as separate functions as
before.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit add usuful function to configure SRv6 localsid
which is represented with seg6local lwt route.
Now, it can support only NEXTHOP_TYPE_IFINDEX route.
Actual configurationof SRv6 localsid is performed with
ZEBRA_ROUTE_ADD. So this is just a wrapper function
for route-install.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit add new nexthop's addional object for SRv6
routing about seg6 route. Before this commit,
we can add MPLS info as additional object on nexthop.
This commit make it add more support about seg6 routes.
seg6 routes are ones of the LWT routing mechanism,
so configuration of seg6local routes is performed by
ZEBRA_ROUTE_SEND, it's same as MPLS configuration.
Real configuration implementation isn't implemented at
this commit. later commit add that. This commit add
only nexthop additional object and some misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works that add new structures for
SRv6-locator. This structure will be used by zebra and another
routing daemon and its ZAPI messaging to manage SRv6-locator.
Encoder/decoder for ZAPI stream is also added by this commit.
Real configuration mechanism isn't implemented at this commit.
later commit add real configure implementation. This commit add only
SRv6-locator's structures and misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 that add new cmd-node for SRv6 configuration.
This commit just add cmd-node and moving node cli only, acutual SRv6 config
command isn't added. (that is added later commit. of this branch)
new cli nodes:
* SRv6
* SRv6-locators
* SRv6-locator
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works that add new nexthop's addional
object for SRv6 routing about seg6local route. Before this commit,
we can add MPLS info as additional object on nexthop.
This commit make it add more support about seg6local routes.
seg6local routes are ones of the LWT routing mechanism,
so configuration of seg6local routes is performed by
ZEBRA_ROUTE_SEND, it's same as MPLS configuration.
Real configuration implementation isn't implemented at this commit.
later commit add that. This commit add only nexthop additional object
and some misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Make seg6local_context2str function's prototype better.
This function is added on commit e496b4203, and function
interface's considering wasn't enough.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Prior to this commit, updating a prefix-list that is referenced by a
route-map clause will unconditionally delete the root node of that
route-map's prefix-tree (used with route-map optimization).
This is problematic because routes not matching a more specific node
in the tree (i.e. other prefix-list sequences) will not fall-back to
the default node, thus they will not hit any route-map sequences.
This commit ensures that an update to a prefix-list will only delete
the default node while adding the first/only seq to the list.
Example config:
========
ip prefix-list peer475-out-pfxlist seq 45 permit 2.138.0.0/16
ip prefix-list peer475-out-pfxlist seq 50 permit 0.0.0.0/0
!
route-map peer475-out permit 5
match ip address prefix-list peer475-out-pfxlist
Before:
========
ub20# do show route-map peer475-out prefix-table
ZEBRA:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
BGP:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
ub20# conf t
ub20(config)# ip prefix-list peer475-out-pfxlist seq 45 permit 2.138.0.0/16 le 32
ub20(config)# do show route-map peer475-out prefix-table
ZEBRA:
IPv4 Prefix Route-map Index List
_______________ ____________________
2.138.0.0/16 (2)
(P)
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
BGP:
IPv4 Prefix Route-map Index List
_______________ ____________________
2.138.0.0/16 (2)
(P)
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
ub20(config)#
After:
========
ub20(config)# do show route-map peer475-out prefix-table
ZEBRA:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
BGP:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
ub20(config)# ip prefix-list peer475-out-pfxlist seq 45 permit 2.138.0.0/16 le 32
ub20(config)# do show route-map peer475-out prefix-table
ZEBRA:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
BGP:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
ub20(config)#
Fixes: 8410
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
lyd_merge_tree replaces dest siblings with source siblings, not what we
want. Instead lyd_merge_siblings to keep both. Instead lyd_merge_siblings
to keep both.
Signed-off-by: Christian Hopps <chopps@labn.net>
This includes community and large-community data.
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:23 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65030
Communities : 65001:1 65001:2 65001:3 65001:4 65001:5 65001:6
Large-Communities: 65001:123:1 65001:123:2
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
Track 'down' state of connected addresses with a new flag. We
may have multiple addresses on an interface that share a prefix;
in those cases, we need to determine when the first address
is valid, to install a connected route, and similarly detect
when the last address goes 'down', to remove the connected
route.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When specifying only an "le" for an existing ip prefix-list qualified with
both an "le" and "ge" make sure to remove the "ge" property so it does
not stay in the tree.
E.g. Saying these two things in order:
ip prefix-list test seq 1 permit 1.1.0.0/16 ge 18 le 24
ip prefix-list test seq 1 permit 1.1.0.0/16 ge 18
... should result in the second statement "overwriting" the first like
this:
vxdev-arch# do show ip prefix-list
ZEBRA: ip prefix-list foobar: 3 entries
seq 1 permit 15.0.0.0/16 ge 18
Previously this did not happen and "le" would stick around since it was
never given NB_OP_DESTROY and purged from the data tree.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Show alias name instead of numerical value in `show bgp <prefix>. E.g.:
```
root@exit1-debian-9:~/frr# vtysh -c 'sh run' | grep 'bgp community alias'
bgp community alias 65001:123 community-1
bgp community alias 65001:123:1 lcommunity-1
root@exit1-debian-9:~/frr#
```
```
exit1-debian-9# sh ip bgp 172.16.16.1/32
BGP routing table entry for 172.16.16.1/32, version 21
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
65030
192.168.0.2 from home-spine1.donatas.net(192.168.0.2) (172.16.16.1)
Origin incomplete, metric 0, valid, external, best (Neighbor IP)
Community: 65001:12 65001:13 community-1 65001:65534
Large Community: lcommunity-1 65001:123:2
Last update: Fri Apr 16 12:51:27 2021
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The distribute_list_init command is not used and is setup
code that will never be used because it makes assumptions about
how distribute-lists work that are fundamentally incorrect.
Remove the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Abstract the parsing of distribute lists so that we
don't have as much cut-n-paste code.
This is a setup commit for future work. In effect
current distribute-list handling is all kinds of messed up
a) eigrp and babel both attempt to use distribute-lists, they just plain
don't work.
b) `distribute-list` is only sent to rip. `ipv6 distribute-list`
is sent to ripngd. If you use `distribute-list` under `router ripng`
it sends the command to rip but ripd is in the wrong mode and it
never works.
c) Should ripngd care about v4 and v6 specific distribute-lists?
This dichotomy was added for babel but babel has been broke
about this since day 1( see a ).
All in all we need to unwind this whole mess. Make distribute-list
commands specific to the daemons( so that we can be in the right
sub-mode ). But the parsing is going to be the same across all
daemons. So let's provide that functionality in `lib/distribute.c`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a simpler, more limited nexthop comparison function. This
compares a few key attributes, such as vrf, gateway, labels.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Problem Statement:
=================
In scale setup BGP sessions start flapping.
RCA:
====
In virtualized environment there are multiple places where
MTU need to be set. If there are some places were MTU is not set
properly then there is chances that BGP packets get fragmented,
in scale setup this will lead to BGP session flap.
Fix:
====
A new tcp option is provided as part of this implementation,
which can be configured per neighbor and helps to set the TCP
max segment size. User need to derive the path MTU between the BGP
neighbors and set that value as part of tcp-mss setting.
1. CLI Configuration:
[no] neighbor <A.B.C.D|X:X::X:X|WORD> tcp-mss (1-65535)
2. Running config
frr# show running-config
router bgp 100
neighbor 198.51.100.2 tcp-mss 150 => new entry
neighbor 2001:DB8::2 tcp-mss 400 => new entry
3. Show command
frr# show bgp neighbors 198.51.100.2
BGP neighbor is 198.51.100.2, remote AS 100, local AS 100, internal link
Hostname: frr
Configured tcp-mss is 150, synced tcp-mss is 138 => new display
4. Show command json output
frr# show bgp neighbors 2001:DB8::2 json
{
"2001:DB8::2":{
"remoteAs":100,
"bgpTimerKeepAliveIntervalMsecs":60000,
"bgpTcpMssConfigured":400, => new entry
"bgpTcpMssSynced":388, => new entry
Risk:
=====
Low - This is a config driven feature and it sets the max segment
size for the TCP session between BGP peers.
Tests Executed:
===============
Have done manual testing with three router topology.
1. Executed basic config and un config scenarios
2. Verified if the config is updated in running config
during config and no config operation
3. Verified the show command output in both CLI format and
JSON format.
4. Verified if TCP SYN messages carry the max segment size
in their initial packets.
5. Verified the behaviour during clear bgp session.
6. done packet capture to see if the new segment size
takes effect.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
pimd was the only user of this function, and that has gone away now.
So just kill the function.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
