We make the assumption that ->attr is not NULL throughout
the code base. We are totally inconsistent about application
of this though.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In bgp_create_evpn_bgp_path_info we create a bgp_path_info
that should be returned since we need it later.
Found by Coverity Scan.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When creating a bgp_path_info for a type 4 route the pi->extra->parent
and the route node for the originating table were not being locked
properly. This will prevent BGP from not properly cleaning up
the data structures on cleanup.
Possibly every one of the functions that we use to create the
new bgp_path_info's should use an abstracted version of this code,
but I am unsure at this point in time if a type 4 should use the same
or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When L3vni is created with prefix-only flag,
the flag is set at bgp vrf instance level.
In the case of bgp instance is non auto created,
means user configured instance (i.e 'router bgp x vrf <name>')
Upon deletion of l3vni, clear the prefix-only flag from
bgp vrf instance.
Ticket:CM-21894
Reviewed By:CCR-9176
Testing Done:
vrf vrf1
vni 104001
exit-vrf
!
router bgp 650030 vrf vrf1
!
tor-21(config)# vrf vrf1
tor-21(config-vrf)# vni 104001 prefix-routes-only
tor-21(config-vrf)# no vni 104001 prefix-routes-only
tor-21(config-vrf)# end
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Problem:
With advertise_svi_ip knob enabled per vni.
Post vni flap, svi MAC-IP route are not originated.
Fix:
When a vni is flapped, upon re-add
send advetise_svi_ip knob to zebra.
Workaround:
re-configure advertise-svi-ip under l2vpn/evpn.
Ticket:CM-26001
Reviewed By:CCR-9118
Testing Done:
With advertise-svi-ip enabled under l2vpn/evpn
in bgp default instance.
Validated vni del/create post ifdown vxlan device
followed by ifup vxlan device.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Evpn extended communities like auto rts (import/export) should
check if its present in list before adding it, to avoid duplicate
addition.
L3vni_add callback from zebra to bgp may see updates to vnis.
The auto import/export rt derivation may call multiple times.
Testing Done:
Before:
TORC11# show bgp l2vpn evpn vni 4001
VNI: 4001 (known to the kernel)
Type: L3
Tenant VRF: vrf1
RD: 45.0.2.2:3
...
Import Route Target:
5546:4001
5546:4001
Export Route Target:
5546:4001
5546:4001
After:
VNI: 4001 (known to the kernel)
Type: L3
Tenant VRF: vrf1
RD: 45.0.2.2:3
...
Import Route Target:
5546:4001
Export Route Target:
5546:4001
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In a situation where a VRF has configured route targets for importing
EVPN routes, this configuration may exist prior to the VRF being
ready to have EVPN routes installed into it - e.g., still missing
the L3VNI configuration or associated interface information. Ensure
that this is taken into account during EVPN route import and unimport.
Without this fix, EVPN routes would end up being prematurely imported
into the VRF routing table and consequently installed as inactive
(because the nexthop information would be incorrect when BGP informs
zebra).
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
This code is not returned anywhere in the system as that bgp
is by default multiple-instance 'only' now. So remove
the last remaining bits of it from the code base.
Remove BGP_ERR_MULTIPLE_INSTANCE_USED too.
Make bgp_get explicitly return BGP_SUCCESS
instead of 0.
Remove the multi-instance error code too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
IMET/type-3 routes are used by VTEPs to advertise the flood mode for BUM
traffic via the PMSI tunnel attribute. If a type-3 route is not rxed from
a remote-VTEP we default to "no-head-end-rep" for that remote-VTEP. In such
cases static-config such as PIM is likely used for BUM flooding.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
IMET route is optional if the flood mode is PIM-SM and serves
no functional purpose. So this change limits type-3 route generation
to flood-mode=head-end-replication.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
If PIM-SM if used for BUM flooding the multicast group address can be
configured per-vxlan-device. BGP receives this config from zebra via
the L2 VNI add/update.
Sample output -
root@TORS1:~# vtysh -c "show bgp l2vpn evpn vni 1000" |grep Mcast
Mcast group: 239.1.1.100
root@TORS1:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
During L3VNI add, non-default RD value is not replayed
correctly. Instead of picking non-default value it picks
up auto RD value which is derived based on router-id.
Indentation issue: Remove additional space from
L3VNI running config output.
Ticket:CM-24320
Reviewed By:CCR-8437
Testing Done:
Bring up evpn configuration with L3vni up with non-default
RD value, perform peerlink flap, l3vni flap which removes
all VNIS and readds with RD and RT values.
The configured RD and RTs are replayed.
Post L3VNI flap
router bgp 5546 vrf vrf2
!
address-family l2vpn evpn
rd 45.0.66.2:6
route-target import 20001:1
route-target export 20001:1
exit-address-family
TORC11# show bgp l2vpn evpn vni 4002
VNI: 4002 (known to the kernel)
Type: L3
Tenant VRF: vrf2
RD: 45.0.66.2:6
Originator IP: 36.0.0.11
Advertise-gw-macip : n/a
Import Route Target:
20001:1
Export Route Target:
20001:1
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When a bgp-peer comes up prior to l3vnis are up in bgpd.
The EVPN routes (type-2/type-5) are learnt via peer.
The routes can have one of interface's MAC in rmac attribute.
The self rmac check would bypass as l3vni is not present.
Once l3vni has come up in bgpd, while installing evpn
routes in vrf table, perform rmac attribute check against self mac.
The routes with rmac of ours will be removed via re-scan
of routes during bgp_mac_rescan_all_evpn_tables when
interface mac is added to bgp.
Ticket:CM-24224
Reviewed By:CCR-8423
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulunetworks.com>
Rename {bgp,zvrf}_def{ault} to {bgp,zvrf}_evpn where it makes sense,
i.e. when they contain the EVPN instance.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
For default RT, this uses the correct ASN to derive the RT (ASN of the
EVPN VRF).
It also stores them in the EVPN VRF's hash tables rather than in the
default's one.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
This change stores the mapping in the hash table of the EVPN VRF rather
than the one of the default VRF.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
This sends local routes in overlay VRFs to the EPVN VRF when
redistribute configurations are present, rather than to the default VRF.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Refine check on whether a route can be injected into EVPN to allow
EVPN-sourced routes to be injected back into another instance.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
IPv4 or IPv6 unicast routes which are imported from EVPN routes
(type-2 or type-5) and installed in a BGP instance can be leaked
to another instance.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case of EVPN symmetric routing, the tenant VRF is associated with
a VNI that is used for routing and commonly referred to as the L3 VNI or
VRF VNI. Corresponding to this VNI is a VLAN and its associated L3 (IP)
interface (SVI). Overlay next hops (i.e., next hops for routes in the
tenant VRF) are reachable over this interface.
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement
section 4.4 provides additional description of the above constructs.
The implementation currently derives this L3 interface for EVPN tenant
routes using special code that looks at route flags. This patch
exchanges the L3 interface between zebra and bgpd as part of the L3-VNI
exchange in order to eliminate some this special code.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Withdraw flag is not sufficient to call bgp_update vs. bgp_withdraw()
processing for a given BGP evpn update message.
When a bgp update needs to be treated as an implicit withdraw
(e.g., due to malformed attribute), the code wasn't handling
things properly.
Rearranging attribute pass field to type-5 route processing and aligning
similar to done for other routes (type2/type-3).
Ticket:CM-24003
Reviewed By:CCR-8330
Testing Done:
Singed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Currently we are hardcoding it at the time of attr building to
ingress-replication. This is just a code clean-up and has no
functional impact.
Ticket: CM-23790
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Executed some evpn related tests with valgrind and saw some errors
related to uninitialized memory and overlapping memcpy. This commit
fixes those.
Ticket: CM-21218
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8249
When an inactive-neigh delete is rxed bgp will not have a local path to
remove (and re-run path selection). Instead it simply re-installs the
current best remote path if any.
Ticket: CM-23018
Testing Done: evpn-min
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Move the info filling for zebra mac-ip install (sent by bgpd) to a
common place.
The commit also fixes missing ROUTER flag for one of the cases
added in a code branch that doesn't have the ROUTER changes -
[
6d8c603a
bgpd: use IP address as tie breaker if the MM seq number is the same
]
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
During L3VNI add delete, configured non-default
route-target is not replayed correctly.
Non-default route-target should only be deleted
during unconfiguring under bgp vrf instance,
during delete of l3vni only unmap from the VRF.
during addition of l3vni map back to the VRF
Ticket:CM-21482
Testing Done:
Bring up evpn configuration with L3vni up with
non-default route-target.
Perform delete/add of L3vni and validated non-default
route-target is mapped back to vrf.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
EVPN route's attribute changes,
mark attribute change flag to imported unicast route.
A scenario where AS_PATH attribute have changed for an EVPN type-5
route, set attribute change
to imported route.
Ticket:CM-23008
Reviewed By:
Testing Done:
Validated via marking EVPN route with AS_PATH prepand.
At the receiving VTEP, ensure attribute change flag is set to
imported unicast route and bgp update sent to VTEPs subsequent
bgp peers with AS_PATH prepend update.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When "default-originate ipv4" is configured, a type-5 route is installed in
the local node and advertised to the peer with auto-rd.
When the above was followed by configuring an RD in IP VRF, Type-5 are
generated for only the non-default routes.
Fixed this issue by withdrawing the default route with auto-rd and advertising
the route with confiured RD.
Signed-off-by: Kishore Aramalla karamalla@vmware.com
