During the database description exchange process, the slave
releases the last dbdesc packet after router_dead_interval.
This was not implemented in the code.
I have written the function ospf6_neighbor_last_dbdesc_release,
which releases the last dbdesc packet after router_dead_interval.
This change was required as per the conformance test 13.11:
In state Full reception of a Database Description packet from
the master after this interval (RouterDeadInterval) will
generate a SeqNumberMismatch neighbor event.
Associated Parameters
ICMPv6 Packet Listen Time
ICMPv6 Packet Tolerance Factor
ICMPv6 Packet Tolerance Time
OSPFV3 DUT Interface Transmit Delay
OSPF Reset Adjacencies Timeout
Test Actions
1.
2. 3.
ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0, with DUT as slave.
ANVL: Wait (for <RouterDeadInterval> seconds).
ANVL: Send <OSPF-DD> packet from neighbor Rtr-0-A to DIface-0 con- taining:
• •
I-bit field not set M-bit field not set
MS-bit field set
DD sequence number same as the one last sent by ANVL.
. ANVL: Listen (for upto 2 * <RxmtInterval> seconds) on DIface-0.
5. DUT: Trigger the event SeqNumberMismatch and set the neighbor state for neighbor Rtr-0-A to ExStart.
6. DUT: Send <OSPF-DD> packet.
7. ANVL: Verify that the received <OSPF-DD> packet contains:
• I-bit field set
• M-bit field set
• MS-bit field set.
Test Reference
• RFC 5340, s4.2.1.2 p19 Sending Database Description Packets
RFC 2328, s10.8 p104 Sending Database Description Packets.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Same as other commits -- convert most DEFINE_MTYPE into the _STATIC
variant, and move the remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
Compare the neighbour id string from the arguments to the router_id of
the neighbor. If equal then call the show function.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
1. All the changes are related to handle ospf6 with different vrf.
2. The dependancy of global ospf6 is removed.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>
Signed-off-by: harios_niral <hari@niralnetworks.com>
The code pattern:
for (ALL_LSDB(lsdb, lsa)) {
remove_lsa(lsa)
}
has a use after free in ALL_LSDB, since we ask for the next pointer,
after it has been freed.
Modify the code such that we grab the next pointer before we can
possibly free it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit 0f9f74baeb.
This commit was causing crashes and the goal of this commit
was to make coverity sanity happy. I'd rather have coverity
sad and not have ospfv3 crash
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
the for (ALL_LSDB...) macro was iterating over lsa,
when lsa had just been freed in these functions.
Remove the macro and make the adjustments saving lsa_next
before the free.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If the user configured an interface to be in a particular mode, we need
to be consistent about that. No looking at if_is_pointopoint() or
if_is_broadcast().
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This serves no other purpose than to generate stupid warnings for
overwritten initializers on old gcc versions.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When neighbor state transition from LOADING to
FULL state, active full neighbors count incremented.
The full neighbors count is used for router-id change
if any full neighbor exist, displays message to restart
ospf6/frr to activate new router-id.
In the case of P-t-P neighbor type neighbor transition
from EXCHANGE to FULL which missed full neighbors count.
Ticket:CM-20574
Testing Done:
Initially, Bring up zebra assigned router-id in ospf6
with point-to-point link based neighbor.
Configure static router-id where restart of ospf6 message
is displayed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Initially INP LSA is originated, when connected
interface comes up. As neighbor is not up, LSA is
not transmitted but stored in DB.
As NSM transition to FULL, INP is scheduled but
ospf6_flood() would not originate the LSA as
current DB and new INP LSA same so it discards
the new LSA.
When Neighor becomes FULL, originate INP via
flushing current DB copy and generate new.
This is introduced as PR 1738 introduce,
premature aging of LSAs in nbr table as R1
going down. upon neigbor coming up, INP was
not updated to new age.
Ticket:CM-19926,CM-19945
Testing Done:
Topology R3 --- R1 -- R2, R1 have INP LSA.
After frr restart R2 and R3 re learnt R1's
INP LSA as new neighbor(s) come up.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Notify user to store config and restart ospf6d
as part of router-id change cli if any of
the area active.
Store zebra router-id under ospf6, when static
router-id removed restore zebra router-id, ask
to restart ospf6d.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
RFC 2328 (14.1) Premature aging of LSAs from
routing domain :
When ospf6d is going away (router going down),
send MAXAGEd self originated LSAs to all
neighbors in routing domain to trigger
Premature aging to remove from resepective LSDBs.
Neighbor Router Reboot:
Upon receiving Self-originate MAXAGEd LSA, simply
discard, Current copy could be non maxaged latest.
For neighbor advertised LSA's (current copy in LSDB)
is set to MAXAGE but received new LSA with Non-MAXAGE
(with current age), discard the current MAXAGE LSA,
Send latest copy of LSA to neighbors and update the
LSDB with new LSA.
When a neighbor transition to FULL, trigger AS-External
LSAs update from external LSDB to new neighbor.
Testing:
R1 ---- DUT --- R5
| \
R2 R3
|
R4
Area 1: R5 and DUT
Area 0: DUT, R1, R2, R3
Area 2: R2 R4
Add IPv6 static routes at R5
Redistribute kernel routes at R5,
Validate routes at R4, redistributed via backbone
to area 2.
Stop n start frr.service at R5 and validated
MAXAGE LSAs then recent age LSAs in Database at DUT-R4.
Validated external routes installed DUT to R4.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
GCC 7.1.1 returned warnings about buffer sizes
not being big enough to handle the full string
that could be generated.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This means there are no ties into the SNMP code anymore other than the
init call at startup.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These now generate warnings which will break the build with -Werror.
Note this may have enabled commands that should be disabled, or the
other way around...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some places, particularly headers, were spewing warnings since they
don't include neccessary other headers to get struct/enum definitions.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 388f8857eb81ef75014060976776523a58a99389)
