The pimg data structure is only used in one spot to send the default
vrf id to zebra upon startup. Add the default vrf id to the struct pim_router
data structure and remove the pimg pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Create a `struct pim_router` and move the thread master into it.
Future commits will further move global varaibles into the pim_router
structure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Just add the ability to notice the capabilities on startup,
but don't do anything with it yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a igmp report and attempt to initiate
a pim ifchannel for it and that fails to work then
let's back out the work done setting stuff up to this
point.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we fail to add a local membership add some additional debugs
so that we can have a bit more information on when something goes
bad.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When sending a sockoption for MRT_INIT, *bsd requires that
the data passed in must be 1. While linux does not, the
code was sending in a positive value that was causing issues
on *bsd of protocol not supported.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When trying to run PIM on *bsd, the kernel expects to only
allow the pim kernel socket to work if we elevate priviledges.
So do so.
This commit gets us further in the startup of PIM on *bsd
but is not sufficient to get it fully started yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Resolves issue with exit-vrf being placed at the end of zebra's portion
of a vrf block, but before other daemons' portions of the same config
block.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit fixes two issues during pim shutdown.
1) The rp_info structure was being freed before the
outgoing notifications that depended on it's information
was sent out as part of shutdown.
2) The pim->upstream_list shutdown involved iterating
over the list via ALL_LIST_ELEMENTS. This typically
is enough but pim will auto delete child nodes as well
as itself when it goes away and they depend on it. As such
the node and nnode could possibly already have been freed.
So change the way we look at all the data in the upstream_list
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Suppose we have a bridge with a host and two routers attached
to it.
r1 r2
| |
--------
|
host
host is sending traffic.
r1 and r2 are pim neighbors and r2 is the DR.
Both r1 and r2 will receive data from the stream up the pim
kernel socket. r1 will notice that it is not the DR and
stop processing in pim. This code adds a bit more code to blackhole
the route when r1 detects it is not the DR in this scenario.
This is being done because the kernel is both keeping state and
sending data to the pim process to continue processing this.
Additionally if we happen to be running this on a asic, then
blackholing the route in the asic can save a significant amount
of cpu time handling this situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we decide we are not the right pim process to add upstream state
for the igmp state received, notice this in a debug to make life
easier to debug.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The tracking of who have drpriority on an interface
in pim was not displayed anywhere. Add to the show
command for future reference.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In pim_if_new use bool instead of an int to pass
true/false values for what we should create the
pim interface type for.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The startup of a non-integrated config was not properly
allowing for startup to create the vif when we have
not learned about the interface we are trying to configure
at this point in time. Actually notice when we are
trying to create a pimreg device or not to properly
notice when to attempt to create the vif or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow at timer wheel creation time the ability to specify a
name for what we want the 'show thread cpu' to show up as.
Modify pim to note this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A new command "ip pim" is created to configure pim sm on an
interface, which replaces the existing commands "ip pim sm"
and "ip pim ssm" and make "ip pim sm" and "ip pim ssm" as
hidden commands. The command "ip multicast-routing" is removed
since it is already enabled on FRR by default.
Signed-off-by: Sarita Patra saritap@vmware.com
config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
End user was seeing this debug but we are not giving
the user enough information to debug this on his own.
Add a tiny bit of extra information that could point
the user to solving the problem for themselves.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When pimd is getting terminated, pim_upstream_del() gets called as
part of cleaning process. pim_upstream_del() deletes the route and
assigns NULL to the up->channel_oil. It also deletes each if_channel
by calling the function pim_ifchannel_delete().
pim_ifchannel_delete() internally calls the caller function pim_upstream_del(),
if it is the last ifchannel for that upstream. So pim_upstream_del
is getting called twice, which will access the up->channel_oil which
was already set to NULL before. This results in crash.
Fix:
pim_ifchannel_delete() should call pim_upstream_del (caller function)
only if the up->ref_count > 0. Added an assert(up->ref_count > 0) in
the function pim_upstream_del().
Signed-off-by: Sarita Patra <saritap@vmware.com>
e.g.
pimd/pim_oil.c: In function ‘pim_channel_oil_dump’:
pimd/pim_oil.c:51:19: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
Build on gcc-8.2.0 is warning-free after this patch.
Signed-off-by: David Lamparter <equinox@diac24.net>
While terminating pim instance, the memory allocated for pim nexthop
should be released before deallocating the memory of pim nexthop cache(pnc).
This resolves the memory leak detected in pnc->nexthop creation.
Signed-off-by: Sarita Patra <saritap@vmware.com>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The definition of the interface commands in vtysh.c were outdated.
Currently, all daemons that call if_cmd_init() will have the "no interface
IFNAME" command and the "[no] description" commands as well, so there's
no need to define exceptions for these commands anymore.
To fix this, make extract.pl parse the if.c file so that vtysh can get the
interface commands from there automatically. Only the "interface IFNAME
[vrf NAME]" must be kept in vtysh.c because it changes the vty node and
thus needs special treatment.
Finally, make pimd and pbrd display interface descriptions on "sh run"
when they are configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't show BFD commands with timers since it might confuse users
("show running-config" won't display timers in client daemons anymore),
but keep accepting this command from previous configurations.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When BFD timers are configured, don't show it anymore in the daemon
side. This will help us migrate the timers command from daemons to
`bfdd`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
pimd/pim_nht.c: In function ‘pim_ecmp_nexthop_search’:
pimd/pim_nht.c:523:17: error: ‘nbr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
nexthop->nbr = nbr;
(on gcc 5.4.0; this is the only warning with that version.)
Signed-off-by: David Lamparter <equinox@diac24.net>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On shutdown and cleaning up pim_upstream ensure that the
upstream_sg_wheel still exists to remove item from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When shutting down, do not free oil information after
interface information since we use the data there to
do so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
frr_fini and pim_free both call zprivs_terminate. There is
no need for pim_free to call this function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If `ip igmp query-max-response-time` is set move it to
display first as that this command has order dependencies
on `ip igmp query-interval`.
Ticket: CM-21598
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When there is a return at the end of a function, there
is no need for another one immediately after it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim_socket_join_source function only ever calls
pim_igmp_join_source and pim_socket_join_source is only
called from 1 place. Skip the level of indirection.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Abstract the RPF change for upstream handling code so
that we do not have two copies of the code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
After we have decided what has changed as part of a update
we need to send the j/p messages to our peers.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Packet sending in PIM is a two step process.
1) Gather data size of next G to be packed into a packet.
2) Write data
After 1 we need to ensure that the next G to pack will actually
fit in a packet. If it does not send what we've currently written
and start a new packet to send.
Because this was a 2 step process it is important to be consistent
in what you think you have packed -vs- what you think you should.
PIM has a bug where we were considering S,G RPT Prunes for a *,G
even when the *,G was being pruned. This lead to a situation where
we were figuring a write size of more data then what we actually wrote
into a packet. This would leave a 8 byte whole of 0's in the packet
due to the way we moved pointers around.
Fix the code so that we do not attempt to consider S,G rpt prunes
for a *,G prune when figuring out how much we should write in step 1.
Ticket: CM-21644
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
