This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
SR support for IS-IS is coming so we need to be able to distinguish
OSPF and IS-IS LSPs.
While here, add missing case statement for LDP on
lsp_type_from_re_type().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Commit eaf6705d7a fixed a problem caused by configuration changes
coming from the kernel. The fix consisted of regenerating the
candidate configuration before every configuration command (when
using the non-transactional CLI mode). There's no need, however,
to regenerate the candidate when it's identical to the running
configuration. Since the northbound keeps track of the version
of each configuration, we can use that information to prevent
regenerating the candidate configuration when that is not necessary.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
frr_with_mutex(...) { ... } locks and automatically unlocks the listed
mutex(es) when the block is exited. This adds a bit of safety against
forgetting the unlock in error paths & co. and makes the code a slight
bit more readable.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conver these functions:
route_map_add_match
route_map_delete_match
route_map_add_set
route_map_delete_set
To return the `enum rmap_compile_rets` and ensure all functions
that use this code handle all the enumerated possible returns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A couple functions in routemap.c were returning
0/1 that were being mapped into the appropriate
enum values on the calling functions to check return
values. This matches the return values to the actual
enum for future readability.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
This - mostly intended for BMP - implements a pull-driven write buffer
filled on demand by a callback with some reasonable buffering logic.
I don't expect it to be that useful in other places, but it's not BMP
specific so it's properly split off in its own place.
Signed-off-by: David Lamparter <equinox@diac24.net>
Arm platforms are crashing in our topotests with this callstack;
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0xffffabb591d0 (LWP 18947))]
(gdb) bt
file=file@entry=0xaaaadfed1e48 "lib/memory.c", line=line@entry=80,
function=function@entry=0xaaaadfed1db8 <__func__.10514> "mt_count_free") at lib/log.c:837
(gdb)
So we are crashing because we are attempting to free a mtype that has no allocations
associated with it.
I added this debug code:
@@ -227,7 +230,9 @@ static void rcu_bump(void)
struct rcu_next *rn;
rn = XMALLOC(MTYPE_RCU_NEXT, sizeof(*rn));
-
+ zlog_debug("RCU_BUMP");
+ mtype_dump(MTYPE_RCU_THREAD);
+ mtype_dump(MTYPE_RCU_NEXT);
/* note: each RCUA_NEXT item corresponds to exactly one seqno bump.
* This means we don't need to communicate which seqno is which
* RCUA_NEXT, since we really don't care.
and added a mtype_dump function:
+void mtype_dump(struct memtype *mt)
+{
+ zlog_debug("%s: %d", mt->name, (int)mt->n_alloc);
+}
Which resulted in this output:
2019/08/28 15:41:11 BGP: RCU_BUMP
2019/08/28 15:41:11 BGP: RCU thread: 3
2019/08/28 15:41:11 BGP: RCU thread: 3
If we look at the defintion of the two static memory types:
DEFINE_MTYPE_STATIC(LIB, RCU_THREAD, "RCU thread")
DEFINE_MTYPE_STATIC(LIB, RCU_NEXT, "RCU sequence barrier")
I would have expected the output to be:
RCU_BUMP
RCU thread: 3
RCU sequence barrier: X
instead.
As a thought experiment I reduced the number of static memory types
to 1 in the file and the crash stopped happening.
I suspect we have a systematic error on arm in lib/memory.h
due to the asm code. I am going to leave that alone for the
moment ( and leave the crash issue open ), but see if we
can get this code change into the system so that our CI
system becomes happy again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FRR community has run into an issue where keeping up our
CI system to work with solaris has become a fairly large burden.
We have also sent emails and asked around and have not found
anyone standing up saying that they are using Solaris.
Given the fact that we do not have any comprehensive testing
being done w/ solaris and the fact that we are getting a steady
stream of new features that will never work on solaris and
we cannot find anyone to say that they are using it. Let's
start the drawn out process of deprecating the code.
If in the mean-time someone comes forward with the fact that
they are using it we can then not deprecate it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FRR has two implementations of VRF, one backed by netns and the other by
the proper VRF implementation in the Linux kernel. In certain places, the
code assumes that a VRF is netns and so lookups fail. One example of this
is in IPv6 RA code. This causes functionality such as Unnumbered BGP to
fail. To fix this, this patch makes if_lookup_by_index handle the
behavior based on the backend, similar to if_get_by_index. For the two
places in if.c that were calling if_lookup_by_index to be specific to
the VRF, I renamed the existing code, if_lookup_by_ifindex and made it a
static function that is never exposed or called by any routine outside of
if.c.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
This is the second part of commit 8d92004979, which converted
only one of the two calls to inet_aton().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some other ZAPI decode functions still use void return values and
can't propagate stream errors to their callers. They need to be fixed
as well in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem reported that "clear bgp *" only cleared ipv6 peers.
Changed the logic to clear all afi/safis of all peers in
that case. Also improved the operation of clearing
individual afi/safi using soft/in/out to do the right thing.
Ticket: CM-25887
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Sort nexthops before we push them to zebra. This offloads
the nexthop sorting zebra is doing onto the upper level protocols
so that when it gets to zebra and we construct a group, it just has
to append them to the tail for every nexthop.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a tail check to see if we can just put the nexthop
at the end of the already sorted list before iteration.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `destination` field of the connection structure was used to store
the broadcast address, if the connection was not p2p. This multipurpose
is not very evident and the benefits over calculating the bcast address
on the fly minimal.
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
In if_netlink.c, when an interface structure, ifp, is first created,
its possible for the master to come up after the slave interface does.
This means, the slave interface has no way to display the master's ifname
in show outputs. To fix this, we need to allow creation by ifindex instead
of by ifname so that this issue is handled.
Signed-off-by: Dinesh G Dutt<5016467+ddutt@users.noreply.github.com>
