1. Renamed "gates" to "nexthops"
2. Displaying afi of the nexthops being dispalyed in place of
"nexthops" JSON object in the old JSON output
3. Calling show_route_nexthop_helper() and show_nexthop_json_helper()
instead of print_nh() inorder to keeps the fields in "nexthops"
JSON object in sync with "nexthops" JSON object of
"show nexthop-group rib json".
Updated vtysh:
r1# show ip nht
192.168.0.2
resolved via connected
is directly connected, r1-eth0 (vrf default)
Client list: static(fd 28)
192.168.0.4
resolved via connected
is directly connected, r1-eth0 (vrf default)
Client list: static(fd 28)
Updated JSON:
r1# show ip nht json
{
"default":{
"ipv4":{
"192.168.0.2":{
"nhtConnected":false,
"clientList":[
{
"protocol":"static",
"socket":28,
"protocolFiltered":"none"
}
],
"nexthops":[
{
"flags":3,
"fib":true,
"directlyConnected":true,
"interfaceIndex":2,
"interfaceName":"r1-eth0",
"vrf":"default",
"active":true
}
],
"resolvedProtocol":"connected"
}
}
}
}
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
New show command "show evpn mac vni xx detail [json]"
to display details of all the mac entries for the
requested VNI.
Output of show evpn mac vni xx detail json:
{
"numMacs":2,
"macs":{
"ca:be:63:7c:81:05":{
"type":"local",
"intf":"veth100",
"ifindex":8,
"uptime":"00:06:55",
"localSequence":0,
"remoteSequence":0,
"detectionCount":0,
"isDuplicate":false,
"syncNeighCount":0,
"neighbors":{
"active":[
"fe80::c8be:63ff:fe7c:8105"
],
"inactive":[
]
}
}
}
}
Also added remoteEs field in the JSON output of
"show evpn mac vni xx json".
Output of show evpn mac vni xx json:
"00:02:00:00:00:0d":{
"type":"remote",
"remoteEs":"03:44:38:39:ff:ff:02:00:00:02",
"localSequence":0,
"remoteSequence":0,
"detectionCount":0,
"isDuplicate":false
}
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
Volta submitted notification changes for the dplane that had a
special use case for their system. Volta is no more, the code
is not being actively developed and from talking with ex-Volta
employees there is no current plans to even maintain this code.
Wrap the special handling of nexthops that their asic-dataplane
did in a bit of code to isolate it and allow for future removal,
as that I do not actually believe anyone else is using this code.
Add a CPP_NOTICE several years into the future that will tell us
to remove the code. If someone starts using it then they will
have to notice this variable to set it and hopefully they will
see my CPP_NOTICE to come talk to us. If this is being used then
we can just remove this wrapper.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
FRR does not use the NLM_F_APPEND semantics ( in fact I would argue that
the NLM_F_APPEND semantics just introduce pain for all parties involved )
I would also argue that most people who use the kernel netlink api
have recognized that NLM_F_APPEND for a route is a recipe for disaster
that is well documented and as such it is not used as anything other
than a curiousity by operators.
See:
https://bugzilla.redhat.com/show_bug.cgi?id=1337855https://github.com/thom311/libnl/issues/226
Are 2 great examples of how confusing it is for anyone in user
space to know what the correct thing to do is. Given that
new fields can be added with no semantics to allow us to know
what has resulted in a change or not.
In an attempt to recognize this, let's note that FRR
believes it has gotten out of sync with the kernel.
Future commits will react to the desynchronized route
and request from the kernel a reload of that specific
route if possible.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Use "get" as the name for checking the status of the bgp
accept lower seq knob. This already has an equivalent "set"
so makes sense to keep it consistent.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add a knob to accept lower seq number in evpn updates
from BGP in Zebra.
Note: Knob is enabled by default
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Instead of having global allow_delete move it to
where it belongs in the zrouter data structure.
Additionally show this data in `show zebra`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the ability for the netconf dplane code to handle
the global NETCONFA_IFINDEX_DEFAULT and NETCONF_IFINDEX_ALL
values. Then store our interested values when we get
them from the kernel as well as being able to display
them to the end operator.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
PBR rules are installed as match, action rules in most dataplanes. This
requires the action to be resolved via a GW. And the GW to be subsequently
resolved to {SMAC, DMAC}.
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Currently specific local neighbors (attached to SVIs) are maintatined
in an EVPN specific database. There is a need to maintain L3 neighbors
for other purposes including MAC resolution for PBR nexthops.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Cleanup compile and fix crash
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
When a nexthop is set RTNH_F_LINKDOWN, start noticing
that this flag is set. Allow FRR to know about this
flag but at this point do not do anything with it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Allow end operator to set how long a nexthop-group is kept around
in the system after it is no-longer being used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Before deleting nexthop groups, that are installed,
from the system, start a timer and hold the nexthop
group for that time.
Suppose you have this scenario
a) create a static route with 1 x ecmp
creates a nhg with 1 x ecmp
b) create a static route with 2 x ecmp
creates a nhg with 2 x ecmp
deletes a's nhg
c) create a static route with 3 x ecmp
creates a nhg with 3 x ecmp
deletes b's nhg
d) create a different route with 1 x ecmp
creates another 1 x ecmp ( since a's ecmp was deleted )
e) create a different route with 2 x ecmp
creates another 2 x ecmp ( since b's ecmp was deleted )
If you don't delete the nhg, start a timer, the nhg's used
in steps a and b can be reused for steps d and e. This reduces
overhead work with zebra <-> kernel interactions and improves
the speed of the system.
So modify the code to note that an installed nexthop group should
be kept around a bit and hopefully reused.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There's a common pattern of "get VRF context for CLI node" here, which
first got a helper macro in zebra that then permeated into pimd.
Unfortunately the pimd copy wasn't quite adjusted correctly and thus
caused two coverity warnings (CID 1517453, CID 1517454).
Fix the PIM one, and clean up by providing a common base macro in
`lib/vty.h`.
Also rename the macros (add `_VRF`) to make more clear what they do.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add command for use to set protodown via frr.conf in
the case our default conflicts with another application
they are using.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add to `show zebra` whether or not RA is compiled into FRR
and whether or not BGP is using RFC 5549 at the moment.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The name 'opaque' is a little general - call the route_entry
struct 're_opaque' to make it more specific.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Update ospfd and ospf6d to send opaque route attributes to
zebra. Those attributes are stored in the RIB and can be viewed
using the "show ip[v6] route" commands (other than that, they are
completely ignored by zebra).
Example:
```
debian# show ip route 192.168.1.0/24
Routing entry for 192.168.1.0/24
Known via "ospf", distance 110, metric 20, best
Last update 01:57:08 ago
* 10.0.1.2, via eth-rt2, weight 1
OSPF path type : External-2
OSPF tag : 0
debian#
debian# show ip route 192.168.1.0/24 json
{
"192.168.1.0\/24":[
{
"prefix":"192.168.1.0\/24",
"prefixLen":24,
"protocol":"ospf",
"vrfId":0,
"vrfName":"default",
"selected":true,
[snip]
"ospfPathType":"External-2",
"ospfTag":"0"
}
]
}
```
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add optional NHG ID output to `show ip route` dumps. We have
this in json output already as nexthopGroupID but nice
to have the option in a normal dump as well. Not including in main
output for now to avoid breaking screen scrapers.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
