Add a check for after table lookup during route map update.
If the table ID does not exist, continue.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The re->uptime usage of time(NULL) leaves it open to
timing changes from outside influence. Switching
to monotime allows us to ensure that we have a timestamp
that is always increasing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Combine the zebra_vrf_other_route_table and zebra_vrf_table_with_table_id
functions into 1 function. Since they are basically the same thing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command is broken and has been broken since the introduction
of vrf's. Since no-one has complained it is safe to assume that
there is no call for this specialized linux command. Remove
from the system with extreme prejudice.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The restricting of data about interfaces was both inconsistent
in application and allowed protocol developers to get into states where
they did not have the expected data about an interface that they
thought that they would. These restrictions and inconsistencies
keep causing bugs that have to be sorted through.
The latest iteration of this bug was that commit:
f20b478ef3
Has caused pim to not receive interface up notifications( but
it knows the interface is back in the vrf and it knows the
relevant ip addresses on the interface as they were changed
as part of an ifdown/ifup cycle ).
Remove this restriction and allow the interface events to
be propagated to all clients.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The client_list should be owned by the zebra_router data structure
as that it is part of global state information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route entry being displayed in debugs was displaying
the originating route type as a number. While numbers
are cool, I for one am not terribly interested in
memorizing them. Modify the (type %d) to a (%s) to
just list the string type of the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
client->ifinfo is a VRF bitmap, hence we need to use
vrf_bitmap_check() to check if a client is subscribed to receive
interface information for a particular VRF. Just checking if
the client->ifinfo value is set will always succeed since it's
a pointer initialized by zserv_client_create(). With this fix,
we'll stop sending interface messages from all VRFs to all clients,
even those that didn't subscribe to it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Check for the modified routemap in zebra_route_map_process_update_cb()
* Added zebra_rib_table_rm_update() for RIB routemap processing
* Added zebra_nht_rm_update() for NHT routemap processing
Signed-off-by: kssoman <somanks@vmware.com>
Allow protocols to specify to zebra that they would like zebra
to use the distance passed down as part of determine sameness for
Route Replace semantics.
This will be used by the static daemon to allow it to have
backup static routes with greater distances.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When debugging code in redistribute.c, it is useful to output
the vrf we think the interface is in. So display it
when we are debugging.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add to zebra route-maps the ability to match on a source-instance
route-map FOO deny 55
match source-instance 5
route-map FOO permit 60
ip protocol any route-map FOO
This will match any protocol route installation with a source-instance of 5.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
When we are debugging add a bit of extra information
so we can know what we are redistributing to our peers
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zserv.c has become something of a dumping ground for everything vaguely
related to ZAPI and really needs some love. This change splits out the
code fo building and consuming ZAPI messages into a separate source
file, leaving the actual session and client lifecycle code in zserv.c.
Unfortunately since the #include situation in Zebra has not been paid
much attention I was forced to fix the headers in a lot of other source
files. This is a net improvement overall though.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When changing from "ip import-table 10 route-map rdn" to "ip
import-table 10" without a route-map, routes would be deleted
and not reinstalled. This fix resolves that problem.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Realized (with coverity's help) the fix had a mistake by pasting in
the wrong route entry to unset the selected flag. This fix takes
care of that mistake.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem was due to in certain route replace circumstances,
we would mark the old route_entry as removed to delete it but
would leave the selected flag set. When the rn was pulled off the
work queue for process, we would find both the new re and old re
(being deleted) with the selected flag set and would assert.
In this change, when we decide to delete the old re, we also mark
it as no longer selected.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When we receive an arbitrary table over the netlink bus
save it for later perusal and sweep any routes that
we may have created from an earlier run.
The current redistribute code is limited to
ZEBRA_KERNEL_TABLE_MAX. I left this alone for the
moment because I believe it needs to be converted
to a RB tree instead of a flat array. Which is more
work for the future. Additionally this proposed
change might necessitate some cli changes or rethinks.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Group send and receive functions together, change handlers to take a
message instead of looking at ->ibuf and ->obuf, allow zebra to read
multiple packets off the wire at a time.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
A lot of the handler functions that are called directly from the ZAPI
input processing code take different argument sets where they don't need
to. These functions are called from only one place and all have the same
fundamental information available to them to do their work. There is no
need to specialize what information is passed to them; it is cleaner and
easier to understand when they all accept the same base set of
information and extract what they need inline.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Also modify `struct route_entry` to use nexthop_groups.
Move ALL_NEXTHOPS loop to nexthop_group.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code modifies zebra to use the STREAM_GET functionality.
This will allow zebra to continue functioning in the case of
bad input data from higher level protocols instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported when a table entry originated by rdnbrd was moved from one
interface to another on the same switch. Both would be deleted, leaving
no imported entry in the table. Modified zebra_add_import_table_entry to
used rib_add_multipath as well as correct the call to delete a duplicate
entry to include the nexthop associated with the route_entry.
Ticket: CM-18154
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed By: CCR-6731
Testing Done: Manual testing successful, deb given to submitter, bgp-smoke
had no new failures
This is a continuation of 915902cb82. Basically the netlink
read of messages up from the kernel is now noticing the proper
owner of the route. As such when rib_delete was being called
as part of the upcall from the kernel we were not noticing that
we were the originator and not diss-allowing the rib_delete
from happening. This restores this behavior that we were getting
pre-915902cb82cfd
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RNODE_FOREACH_RE... function calls were not properly being
indented when we switched over to the new format. Let's fix
this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Now that all rib functions are afi/safi independent,
allow import-table to work with v6 routes too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are 3 different implementations of is_prefix.
Standardize on is_prefix_default and fix it's implementation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Various socket close issues
2) Ensure afi passed is usable
3) Fix some reads beyond buffer and reads after free
4) Ensure some failure modes are handled properly
5) Memory Leak(s) fix
6) There is no 6.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When the linux kernel adds/deletes routes, the
metric is important, but our routing protocols
add/delete in a slightly different manner,
so allow kernel metrics to match so that our
rib matches the kernel's fib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Whenever you did "redistribute" zebra would kick this off for ipv4 and
ipv6. No real issue other than this is sub-optimal
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem reported by a customer with prefix imported by rdnbrd not being
successfully installed in the quagga rib. Determined that this was due
to VRR resolving the same arp entry, causing two entries to be installed
in table 10. When these were imported into the quagga rib, they came in
as two different rib entries from the same table/instance, which is not
permitted and caused them to be deleted.
Added logic to zebra_add_import_table_entry to do the same actions as
rib_add and delete the older rib entry if a new rib entry is received
which matches.
Manual testing successful and automated tests for redistribute neighbor
have the same passes and failures as the base.
Ticket: CM-15926
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by:
Check and read the IPv6 source prefix on ZAPI messages, and pass it down
to the RIB functions (which do nothing with it yet.) Since the RIB
functions now all have a new extra argument, this also updates the
kernel route read functions to supply NULL.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There's no need to duplicate the 'vrf_id' and 'name' fields from the 'vrf'
structure into the 'zebra_vrf' structure. Instead of that, add a back
pointer in 'zebra_vrf' that should point to the associated 'vrf' structure.
Additionally, modify the vrf callbacks to pass the whole vrf structure
as a parameter. This allow us to make further simplifications in the code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Change redist_check_instance() to return a pointer instead of returning 1
on success. This way this function can be reused in redist_del_instance()
instead of duplicating the same logic there.
Also, remove unnecessary call to redist_check_instance() in
zebra_redistribute_delete().
While here, remove unnecessary cast from void* in redist_add_instance().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We should not check/modify client->redist[] when the requested instance
is different than zero.
In the same way, we should not check/modify client->mi_redist[] when
the requested instance is zero.
Failure to respect these conditions can lead to unexpected behavior in
the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We were always redistributing the default routes (IPv[46]) in
redistribute_update() because the 'client->redist_default' condition
always returns true.
The 'redist_default' member of the 'zserv' structure is a pointer and is
always initialized with vrf_bitmap_init() in the zebra_client_create()
function.
To fix this, use vrf_bitmap_check() instead.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The ZEBRA_ROUTE_ALL route type can be used by a client to request
all routes from zebra. The main motivation for introducing this is
to allow ldpd to get routes from all OSPF instances, not only from
the default one. Without ZEBRA_ROUTE_ALL, ldpd would need to send a
ZEBRA_REDISTRIBUTE_ADD message for each possible OSPF instance (65k),
which doesn't scale very well.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-13020
Now that we have evpn we have the following AFIs
/* Address family numbers from RFC1700. */
typedef enum {
AFI_IP = 1,
AFI_IP6 = 2,
AFI_ETHER = 3, /* RFC 1700 has "6" for 802.* */
AFI_MAX = 4
} afi_t;
The import-table code was treating the afi as a flag which was fine
before when the only choices were 1 and 2 but now that we have #3 that
doesn't work. The fix is to change zebra_import_table_used to a
[AFI_MAX][ZEBRA_KERNEL_TABLE_MAX] array to track if import-table is
enabled.
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
NOTE: I am squashing several commits together because they
do not independently compile and we need this ability to
do any type of sane testing on the patches. Since this
series builds together I am doing this. -DBS
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for IEEE 754 format
* lib/stream.[c,h]: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
* lib/network.[c,h]: Add ntohf and htonf converter
* lib/memtypes.c: Add new memeory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support of new link-params CLI to vtysh
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Update Traffic Engineering support for OSPFD
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic Engineering
metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
tmp
This commits allow overriding MTU using netlink attributes on
per-route basis. This is useful for routing protocols that can
advertice prefix specific MTUs between routers (e.g. NHRP).
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
(cherry picked from commit b11f3b54c842117e22e2f5cf1561ea34eee8dfcc)
This makes code more robust, consice and readable.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit be6335d682c5ee1b6930345193eda875705fbab2)
Merge the conditionals as one to avoid code duplication.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit f85592e05ae6463727433893e61afd1081fcf7e0)
Conflicts:
zebra/redistribute.c
Added the ability to supply a route-map to the ip import-table command,
which greatly improves filtering between the kernel prefixes in a
non-default table that are imported into the zebra rib.
Ticket:CM-8168
Signed-off-by: Donald Slice
Reviewed By: Donald Sharp
Changed interaction between zebra and routing protocols so that they correctly
fill in the vrf_iflist even for vrfs they're not responsible for. In that way,
when they get callbacks from zebra they can correctly understand whether they need
to create them or not.
Ticket: CM-10427
Signed-off-by: Don Slice
Reviewed-by:
Zebra is crashing inside of zserv_rnh_register when it attempts to
lookup a vrf that was just deleted:
Imagine this series of events:
Pre (A): ifdown -a -X eth0
(A) zebra notification from kernel that vrf is goneroo
(B) zebra notifies all daemons
(C) bgpd is churning because we have been removing interfaces and we
have an new path and it hasn't handled the vrf goneroo event yet from
zebra so it sends to zebra a new rnh with an old vrf_id.
(D) zebra attempts to lookup the zvrf and crashes because of pointer
dereference.
zebra handles all callbacks in one function. Convert that function to
check to see if we have a valid zvrf. If so make the callback
Ticket: CM-10482
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Move zebra_vrf_XXX functionality into it's own
file so that we can isolate a bit the api edges
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
We were including 'extern struct zebra_t zebrad;' all
over the place. This made no sense. Refactor
into zserv.h where the definition was and remove resulting
unnecessary code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
We were incorrectly using vrf instead of zebra_vrf in a
few spots.
Ticket: CM-9412
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Implement VRF change semantics for an interface to be invoked
when an interface is moved from one VRF (e.g., the Default) to
another. This includes the message definition as well as updating,
deleting or adding the interface from clients, depending on their
interest in the VRFs (old and new). Also handle replay of the
addresses on the interface upon VRF change, if required.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-9527
Reviewed By: CCR-4174
Testing Done: Manual tests of various scenarios
Convert the rest of zebra over to use a Namespae and VRF.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some of the changes include:
- ensuring IPv6 addresses are printed correctly
- say 'updating' or 'deleting' etc. only when that is actually done
- say 'queuing' or 'dequeuing' only when that is actually done
- print useful info for 'detailed' debug - that now subsumes 'rib queue'
- delete various useless logs
- VRF-specific - print VRF id in RIB debugs prior to prefix
(e.g., 4:37.1.1.0/28)
Ticket: CM-8110
Reviewed By: CCR-3765
Testing Done: Manual testing (2.5-br)
