IGMP group/source memberships are a property of the interface; the
particular IP address that the querier used to collect the data is
irrelevant.
... and IGMP packets get delivered only once to pimd anyway, since we
receive them on the "global" per-VRF IGMP socket. (The one in igmp_sock
is only used for sending queries.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
pimd's include files are very interdependent. Let's chop that down a
bit to gain some flexibility.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
Problem Statement:
==================
IGMP query is sent at irregular intervals
(more than 30 seconds) when "ip igmp query-max-response-time 100"
command is executed multiple times.
RCA:
=================
When "ip igmp query-max-response-time 100" is executed, the timers
are reset resulting in the delay of sending the query.
Fix:
=================
When there is no change in the config value, we should not reset
the timers.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Making the interface holdtime range to 3.5 times the hello-time
As per 7761, Section 4.11:
The Holdtime in a Hello message should be set to
(3.5 * Hello_Period), giving a default value of 105 seconds.
Therefore providing the user also to configure max upto 3.5 times
the hello timer interval.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Rename functions (`pim_msdp_peer_new` => `pim_msdp_peer_add` and
`pim_msdp_peer_do_del` => `pim_msdp_peer_del`) to keep consistency and
update the `pim_msdp_peer_add` documentation to tell users that this is
also used for non meshed group peers.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Fully utilize the northbound to hold pointers to our private data
instead of searching for data structures every time we need to change a
configuration.
Highlights:
* Support multiple mesh groups per PIM instance (instead of one)
* Use DEFPY instead of DEFUN to reduce code complexity
* Use northbound private pointers to store data structures
* Reduce callback names size
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
VRF creation can happen from either cli or from
knowledged about the vrf learned from zebra.
In the case where we learn about the vrf from
the cli, the vrf id is UNKNOWN. Upon actual
creation of the vrf, lib/vrf.c touches up the vrf_id
and calls pim_vrf_enable to turn it on properly.
At this point in time we have a pim->vrf_id of
UNKNOWN and the vrf->vrf_id of the right value.
There is no point in duplicating this data. So just
remove all pim->vrf_id and use the vrf->vrf_id instead
since we keep a copy of the pim->vrf pointer.
This will remove some crashes where we expect the
pim->vrf_id to be usable and it's not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The router->register_suppress_time is used to derive the
rp_keep_alive_time, but when the suppress time was changed, pim was
not recalculating the rp_keep_alive_time and left it at the old value.
This fix applies the changes when a new suppress_time is entered
(or removed.)
Signed-off-by: Don Slice <dslice@nvidia.com>
`config.h` has all the defines from autoconf, which may include things
that switch behavior of other included headers (e.g. _GNU_SOURCE
enabling prototypes for additional functions.)
So, the first include in any `.c` file must be either `config.h` (with
the appropriate guard) or `zebra.h` (which includes `config.h` first
thing.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Also included display of hold time in CLI 'show ip pim int <intf>' cmd
and json commands.
Issue:
PIM neighbor not coming up if hold time is less than hello timer
since hello is sent every 4 sec and hold is 1 sec,
because of this nbr is flapping
Fix:
Do not allow configuration of hold timer less than hello timer
Also reset the value of hold timer to 3.5 times to hello whenever
only hello is modified so that the relationship holds good.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
There are places in the code where function nb_running_get_entry is used
with abort_if_not_found set to true during the config validation stage.
This is incorrect because when used in transactional CLI, the running
entry won't be set until the apply stage, and such usage leads to crash.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This was found while doing libyang2 work (causes assert); however, it is
also incorrect for libyang1 (empty canonical value for incorrectly
referenced interface vs interface-name node).
While here, fix 2 other incorrect uses of "." on a container node.
Signed-off-by: Christian Hopps <chopps@labn.net>
We can proactively check whether this mroute will be nacked by loopfree
MFC checks so let's do it in the apply phase and emit a useful error
message.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Issue: #7892 has a startup config where only igmp
interfaces are created and a igmp report comes in.
Effectively we are not creating the regiface device unless
we do a `ip pim`. This is incorrect we should always create
the regiface.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
