After the restructure of the gr code to allow zebra_gr
to have individual cleanups of afi, this is no longer necessary.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When GR is running and attempting to clear up a node
if the node that is currently saved and we are coming
back to happens to be deleted during the time zebra
suspends the GR code due to hitting the node limit
then zebra GR code will just completely stop processing
and potentially leave stale nodes around forever.
Let's just remove this hole and process what we can.
Can you imagine trying to debug this after the fact?
If we remove a node then that counts toward the maximum
to process of ZEBRA_MAX_STALE_ROUTE_COUNT. This should
prevent any non-processing with a slightly larger cost
of having to look at a few nodes repeatedly
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Most 32-bit architectures cannot do atomic loads and stores of data
wider than their pointer size, i.e. 32 bit. Funnily enough they
generally *can* do a CAS2, i.e., 64-bit compare-and-swap, but while a
CAS can emulate atomic add/bitops, loads and stores aren't available.
Replace with a mutex; since this is 99% used from the zserv thread, the
mutex should take the local-to-thread fast path anyway. And while one
atomic might be faster than a mutex lock/unlock, we're doing several
here, and at some point a mutex wins on speed anyway.
This fixes build on armel, mipsel, m68k, powerpc, and sh4.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
convert:
frr_with_mutex(..)
to:
frr_with_mutex (..)
To make all our code agree with what clang-format is going to produce
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
At some scale we eventually run out of room displaying v4/v6 route
totals for `show zebra client summ`:
janelle# show zebra client summ
Name Connect Time Last Read Last Write IPv4 Routes IPv6 Routes
--------------------------------------------------------------------------------
bgp 04w0d18h 00:00:19 00:01:2411729127/4052681 2037786/903094
This total over ran the space in just a little over a week of uptime.
Expand to have a bit more room.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a client sends to zebra that GR mode is being turned
on. The client also passes down the time zebra should hold
onto the routes. Display this time with the output
of the `show zebra client` command as well.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When issuing the `show zebra client` command data about
Graceful Restart state is being printed 2 times.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
zebra implements zebra api for configuring link layer information. that
can be an arp entry (for ipv4) or ipv6 neighbor discovery entry. This
can also be an ipv4/ipv6 entry associated to an underlay ipv4 address,
as it is used in gre point to multipoint interfaces.
this api will also be used as monitoring. an hash list is instantiated
into zebra (this is the vrf bitmap). each client interested in those entries
in a specific vrf, will listen for following messages: entries added, removed,
or who-has messages.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add code to handle proto-based NHG uninstalling after
the owning client disconnects.
This is handled the same way as rib_score_proto() but for now
we are ignoring instance.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The fuzzing code that is in the master branch is outdated and unused, so it
is worth to remove it to improve readablity of the code.
All the code related to the fuzzing is in the `fuzz` branch.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
1. Local ethernet segments are configured in zebra by attaching a
local-es-id and sys-mac to a access interface -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
interface hostbond1
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This info is then sent to BGP and used for the generation of EAD-per-ES
routes.
2. Access VLANs associated with an (ES) access port are translated into
ES-EVI objects and sent to BGP. This is used by BGP for the
generation of EAD-EVI routes.
3. Remote ESs are imported by BGP and sent to zebra. A list of VTEPs
is maintained per-remote ES in zebra. This list is used for the creation
of the L2-NHG that is used for forwarding traffic.
4. MAC entries with a non-zero ESI destination use the L2-NHG associated
with the ESI for forwarding traffic over the VxLAN overlay.
Please see zebra_evpn_mh.h for the datastruct organization details.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
* add a vrf sub-command `[no] ipv6 router-id X:X::X:X`.
* add command `[no] ipv6 router-id X:X::X:X [vrf NAME]` for backward
compatibility.
* add a vrf sub-command `[no] ip router-id A.B.C.D` and make the old
one without `ip` an alias for it.
* add a command `[no] ip router-id A.B.C.D [vrf NAME]` for backward
comptibility and make the old one without `ip` an alias for it.
* add command `show ip router-id [vrf NAME]` and make
the old one without `ip` an alias for it.
* add command `show ipv6 router-id [vrf NAME]`.
* add ZAPI commands `ZEBRA_ROUTER_ID_V6_ADD`,
`ZEBRA_ROUTER_ID_V6_DELETE` and `ZEBRA_ROUTER_ID_V6_UPDATE`
for deamons to get notified of the IPv6 router-id.
* update zebra documentation.
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Distinguish between unicast and broadcast opaque messages
in zebra handler code. Add cli and internal api changes to
have sharpd send unicast opaque messages. Add opaque cli
commands to the sharp user doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The zapi code processes a batch of incoming messages, using a
fifo. Hand the entire batch into the main zebra handling code,
and let it loop through the individual messages.
Divert the special OPAQUE messages from the normal processing
flow, and offer them to the new zebra_opaque module instead.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a mutex used to manage the list of zclients. Add a busy
counter to the zapi client session, so that we can use a
client session from another pthread.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
`debug zebra packet detail` dumps the full message whereas
it had been dropping exactly 10 bytes, the size of the zebra header
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
Distinguish zapi sessions, for daemons who use more than one,
by adding a session id. The tuple of proto + instance is not
adequate to support clients who use multiple zapi sessions.
Include the id in the client show output if it's present. Add
a bit of info about this to the developer doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a common api that formats a time interval into a string
with different output for short and longer intervals. We do
this in several places, for cli/ui output.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When a client connects to zebra with GR capabilities and
then restarts, it might disconnect again even before hello is
sent leading zebra cores.
GR should be supported only for dynamic neighbor who are capable
of restarting.
Signed-off-by: Santosh P K <sapk@vmware.com>
Zebra will have special handling for clients with GR enabled.
When client disconnects with GR enabled, then a stale client
will be created and its RIB will be retained till stale timer
or client comes up and updated its RIB.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
Adding header files changes where structure to hold
received graceful restart info from client is defined.
Also there are changes for show commands where exisiting
commands are extended.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
