Debugging-isis tag was moved.
Move it to right place.
Fixes: 9389175b75 ("doc: add documentation for IS-IS Segment Routing")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
1. Added interface name, group address and detail option to existing
"show ip igmp groups" so that user can retrieve all the groups
or a particular group for an interface. Detail option shows the source
information for the group. With that, the show command
looks like:
"show ip igmp [vrf NAME$vrf_name] groups [INTERFACE$ifname [GROUP$grp_str]] [detail$detail] [json$json]"
2. Changed pim_cmd_lookup_vrf() to return empty JSON if VRF is not present
3. Changed "detail" option to print non pretty JSON
4. Added interface name and group address to existing
"show ip igmp sources" so that user can retrieve all the sources for
all the groups or, all the sorces for a particular group for an
interface. With that, the show command looks like:
"show ip igmp [vrf NAME$vrf_name] sourcess [INTERFACE$ifname [GROUP$grp_str]] [json$json]"
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
In BGP labeled unicast address-family, it is not possible to
send explicit-null label values with redistributed or network
declared prefixes.
A new CLI command is introduced:
> [no] bgp labeled-unicast explicit-null
When used, the explicit-null value for IPv4 ('0' value) or
IPv6 ('2' value) will be used.
It is necessary to reconfigure the networks or the
redistribution in order to inherit this new behaviour.
Add the documentation.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Since mgmtd no longer supports the frr_startup.json, removing the
documentation related to that. Proper documentation will be added
when/if the frr_startup.json is ever supported.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
Implement NSSA address ranges as specified by RFC 3101:
NSSA border routers may be configured with Type-7 address ranges.
Each Type-7 address range is defined as an [address,mask] pair. Many
separate Type-7 networks may fall into a single Type-7 address range,
just as a subnetted network is composed of many separate subnets.
NSSA border routers may aggregate Type-7 routes by advertising a
single Type-5 LSA for each Type-7 address range. The Type-5 LSA
resulting from a Type-7 address range match will be distributed to
all Type-5 capable areas.
Syntax:
area A.B.C.D nssa range A.B.C.D/M [<not-advertise|cost (0-16777215)>]
Example:
router ospf
router-id 1.1.1.1
area 1 nssa
area 1 nssa range 172.16.0.0/16
area 1 nssa range 10.1.0.0/16
!
Since regular area ranges and NSSA ranges have a lot in common,
this commit reuses the existing infrastructure for area ranges as
much as possible to avoid code duplication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add the "default-information-originate" option to the "area X nssa"
command. That option allows the origination of Type-7 default routes
on NSSA ABRs and ASBRs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This commit adds user documentation for the new MGMT daemon and
new FRR Management Framework.
Co-authored-by: Yash Ranjan <ranjany@vmware.com>
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Co-authored-by: Ujwal P <ujwalp@vmware.com>
Signed-off-by: Pushpasis Sarkar <pushpasis@gmail.com>
It's not allowed to install routes with zero distance, let's disallow this
for route-maps as well.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There are some specific edge-cases when is a need to run FRR and another FRR
and/or another BGP implementation on the same box. Relaxing 127.0.0.0/8 for
this case might be reasonable.
An example below peering via 127.0.0.0/8 between FRR and GoBGP:
```
% ss -ntlp | grep 179
LISTEN 0 4096 127.0.0.1:179 0.0.0.0:*
LISTEN 0 128 127.0.0.2:179 0.0.0.0:*
% grep 127.0.0.2 /etc/frr/daemons
bgpd_options=" -A 127.0.0.1 -l 127.0.0.2"
% grep local /etc/gobgp/config.toml
local-address-list = ["127.0.0.1"]
donatas-pc# sh ip bgp summary
IPv4 Unicast Summary (VRF default):
BGP router identifier 192.168.10.17, local AS number 65001 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 725 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
127.0.0.1 4 65002 7 7 0 0 0 00:02:02 0 0 N/A
Total number of neighbors 1
donatas-pc#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This option is useful to dump detailed information about the LSDB using
a single command (instead of one command per LSA type).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Combine all variations of this command into a single DEFPY to
improve maintainability. No behavioral changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Note that `ASNUM` in table, it is missing right parenthesis for
`(1-4294967295)`. So, adjust this table.
And correct other words for doc.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Quite a few well-known communities from IANA's list do
not receive special treatment in Cisco IOS XR, and at least one
community on Cisco IOS XR's special treatment list, internet == 0:0,
is not formally a well-known community as it is not in [IANA-WKC] (it
is taken from the Reserved range [0x00000000-0x0000FFFF]).
https://datatracker.ietf.org/doc/html/rfc8642
This is Cisco-specific command which is causing lots of questions when it
comes to debugging and/or configuring it properly, but overall, this behavior
is very odd and it's not clear how it should be treated between different
vendor implementations.
Let's deprecate it and let the operators use 0:0/0 communities as they want.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add a keyword self-originate" to extend current CLI commands to filter out self-originated routes only
a\) CLI to show ipv4/ipv6 self-originated routes
"show [ip] bgp [afi] [safi] [all] self-originate [wide|json]"
b\) CLI to show evpn self-originated routes
"show bgp l2vpn evpn route [detail] [type <ead|macip|multicast|es|prefix|1|2|3|4|5>] self-originate [json]"
Signed-off-by: Karl Quan <kquan@nvidia.com>
