Problem: This happened in once in a while during testing the scenario multiple
times. When regstop timer expire and at that point if rpf interface doesn't
exist, the register state for the upstream gets struck in reg-prune state indefinitely.
This will not recover even when rpf comes back and traffic resumed because
register state is struck on prune.
RCA: Reg suppression expiry is keeping reg state unchanged when iif is absent.
Fix: When iif is absent during reg suppression expiry, treat it as couldreg
becoming false and move it NO_INFO state.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: Upstreams which are in register state other than noinfo, doesnt remove
register tunnel from oif after it becomes nonDR
Fix: scan upstreams with iif as the old dr and check if couldReg becomes false.
If couldreg becomes false from true, remove regiface and stop reg timer.
Do not disturb the entry. Later the entry shall be removed by kat expiry.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA:
Either JP timer is used to send join or join timer.
We are not removing the group from jp aggregate during suppression.
So even if join timer is restarted, jp aggregate expiry during suppression
is sending join for the group.
Fix:
Remove the group from jp aggregate on the neighbor during jp suppression.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: Periodic join is mostly sent by nbr jp timer except for few scenarios by upstream join timer
Fix: If join timer not running, we have to use nbr jp timer to calculate
remaining time for next join.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Issue: Client1------LHR-----(int-1)RP(int-2)------client2
Client2 send IGMP join for group G.
Client1 send IGMP join for group G.
verify show ip mroute in RP, will have 2 OIL.
Client2 send IGMP leave.
Verify show ip mroute in RP, will still have 2.
Root cause: When RP receives IGMP join from client2, it creates
a (s,g) channel oil and add the interface int-2 into oil list and
set the flag PIM_OIF_FLAG_PROTO_IGMP to int-2
Client1 send IGMP join, LHR will send a (*,G) join to RP. RP will
add the interface int-1 into the oil list of (s,g) channel_oil and
will set the flag PIM_OIF_FLAG_PROTO_IGMP and PIM_OIF_FLAG_PROTO_PIM
to the int-1 and set PIM_OIF_FLAG_PROTO_PIM to int-2 as well. It is
happening because of the pim_upstream_inherited_olist_decide() and
forward_on() get all the oil and update the flag wrongly.
So now when client 2 sends IGMP prune, RP will not remove the int-2
from oil list since both PIM_OIF_FLAG_PROTO_PIM & PIM_OIF_FLAG_PROTO_IGMP
are set, it just unset the flag PIM_OIF_FLAG_PROTO_IGMP.
Fix: Introduced new flags in if_channel, PIM_IF_FLAG_MASK_PROTO_PIM
& PIM_IF_FLAG_MASK_PROTO_IGMP. If a if_channel is created because of
pim join or pim (s,g,rpt) prune received, then set the flag
PIM_IF_FLAG_MASK_PROTO_PIM. If a if_channel is created becuase of IGMP
join received, then set the flag PIM_IF_FLAG_MASK_PROTO_IGMP.
When an interface needs to be added into the oil list check if
PIM_IF_FLAG_MASK_PROTO_PIM or PIM_IF_FLAG_MASK_PROTO_IGMP is set, then
update oil flag accordingly.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When the (S,G) KAT expires we need to poll for activity before dropping the
entry as traffic may have been forwarded by the dataplane since the last
periodic poll cycle.
This only works if traffic is being forwarded by the kernel i.e. if the
entries were HW accelerated via an ASIC we may still miss out on last
minute activity on the mroute in the HW.
Ticket: CM-26871
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Initially, MLAG Sync is happened at pim_ifchannel, this is mainly to
support even config mismatches(missing configuration of dual active).
But this causes more syncs for each entry.
and also it is not In-line with PIM EVPN. to avoid that moving to
pm_upstream based syncing.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
(S,G) entries that inherit ipmr-lo into the OIL also inherit
the DF role from the parent (*, G) entry.
This change is done primarily to simplify the sync process and
to prevent the MLAG peers from having to track (S, G) activity etc.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
A local membership is created on the vxlan termination device ipmr-lo. This
is done to -
1. Pull multicast vxlan tunnel traffic to the VTEP for termination by
triggering JoinDesired on the BUM multicast group.
2. Include the OIF in the mroute to signal to the dataplane component
that flow needs to be vxlan terminated.
Earlier we were overloading the PIM_UPSTREAM_FLAG_MASK_SRC_IGMP for
this local membership creation but that is creating confusion both in
the state machine and in the show outputs. To avoid that we use the
more apparent PIM_UPSTREAM_FLAG_MASK_SRC_VXLAN_TERM. With this change -
1. We get LHR functionality for VXLAN_TERM mroutes
2. OIF is populated with PIM_OIF_FLAG_PROTO_PIM only
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This is not causing functional problems but has become a source
of confusion. DF status is only relevant to multicast tunnel decaps.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The RPF cost is incremented by 10 if the RPF interface is the peerlink-rif.
This is used to force the MLAG switch with the lowest cost to the RPF
to become the MLAG DF. If a switch has to go via the peerlink-rif to get
to the RP or source it simplly cannot be the designated forwarder.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
DF election is only run for (*,G) entries i.e. election is skipped
for (S,G) entries that are setup as a result of SPT switchover. (S,G)
entries inherit the DF role from the parent (*,G) entry. So the DF is
responsible for terminating all sources associated with a group.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. Upstream entries associated with tunnel termination mroutes are
synced to the MLAG peer via the local MLAG daemon.
2. These entries are installed in the peer switch (via an upstream
ref flag).
3. DF (Designated Forwarder) election is run per-upstream entry by both
the MLAG switches -
a. The switch with the lowest RPF cost is the DF winner
b. If both switches have the same RPF cost the MLAG role is
used as a tie breaker with the MLAG primary becoming the DF
winner.
4. The DF winner terminates the multicast traffic by adding the tunnel
termination device to the OIL. The non-DF suppresses the termination
device from the OIL.
Note: Before the PIM-MLAG interface was available hidden config was
used to test the EVPN-PIM functionality with MLAG. I have removed the
code to persist that config to avoid confusion. The hidden commands are
still available.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Convert the upstream_list and hash to a rb tree, Significant
time was being spent in the listnode_add_sort. This reduces
this time greatly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
use_rpt macro depends on JoinDesired macro and is mostly independent of the
actual RPF interface i.e. doesn't change when the RPF interface changes.
There is however one exception to this handling and that is on the
first hop router (DR or non-DR). On the DR the FHR flag is set so the
RPF interface stays irrelevant to use_rpt eval. But on the non-DR the
IIF is the only way to know we are directly connected to the SG i.e.
to know that we must NOT switch the source to RPT.
This commit fixes up the order of use_rpt eval -
1. it is done before mroute programming
2. but after IIF setup, for SRC_NOCACHE and STATIC_IIF upstream entries
Note: drop an unnecessary check to verify that the RPF interface is
pim enabled. This is just to make the code consistent.
Ticket: CM-27446
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
JD macro is defined by the RFC as -
bool JoinDesired(S,G) {
return (immediate_olist(S,G) != NULL
OR (KeepaliveTimer(S,G) is running
AND inherited_olist(S,G) != NULL))
}
However for MSDP synced SA the KAT will not be running so an exception is
needed. Earlier I had done this by relaxing KAT_run requirements entirely
on the RP. However as that prevents the source from being aged out in some
cases I have made the check more narrow i.e. has to an MSDP peer added
entry.
Ticket: CM-24398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Added event logs around add/del of upstream entries into the nbr's
jp-agg list. This is to help debug a problem with stale (deleted)
upstream entries being present in the list causing pimd to crash on
the periodic processing.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Today we are only pruning the SPT when (S,G) upstream entry
switches from Joined toNotJoined. This leaves the source still
pruned along the RPT till the next periodic XG join-prune is sent
to the RPF(RP). Traffic from the source will be blackholed for this
duration. To prevent that we need send a new JP message
to RPF(RP) immediately.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This was causing pimd to crash later; call-stack -
(gdb) bt
context=<optimized out>) at lib/sigevent.c:254
group=group@entry=0x7ffffa9797e0) at pimd/pim_rp.c:207
grp=grp@entry=0x7ffffa9799fe, sgs=sgs@entry=0x560ac069edb0, size=52)
at pimd/pim_msg.c:200
groups=<optimized out>) at pimd/pim_join.c:562
at pimd/pim_neighbor.c:288
at lib/thread.c:1599
at lib/libfrr.c:1024
envp=<optimized out>) at pimd/pim_main.c:162
(gdb) fr 4
group=group@entry=0x7ffffa9797e0) at pimd/pim_rp.c:207
207 pimd/pim_rp.c: No such file or directory.
(gdb) fr 6
grp=grp@entry=0x7ffffa9799fe, sgs=sgs@entry=0x560ac069edb0, size=52)
at pimd/pim_msg.c:200
200 pimd/pim_msg.c: No such file or directory.
(gdb) p source->up->sg_str
$1 = '\000' <repeats 31 times>, <incomplete sequence \361>
(gdb)
This problem can manifest in the following event sequence -
1. upstream RPF neighbor is resolved
2. upstream RPF neighbor becomes unresolved (but upstream entry
stays on the jp-agg list)
3. upstream entry is removed
on the next old-neighbor jp-agg-list processing the stale entry is
accessed resulting in the crash.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
A dummy pim upstream entry can be in a JOINED state before its RPF nbr is
added. Handle that case by triggering an immediate join.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. KAT should be re-started only if traffic rxed along the SPT i.e.
IIF == RPF_Interface(S).
Only exception to the rule is if you are LHR.
2. KAT should be started on all routers (not just FHR, RP, LHR).
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Criteria for switching to SPT is different on RP and LHR. Re-name
the functions to make that apparent.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This commit includes the following changes -
1. kat needs to be included when evaluting join desired on a (S,G)
entry.
2. there were cases where we were adding OIF based on joindesired
being true for unrelated reasons (on other OIFs). cleaned up those
cases.
3. make all calls to pim_upstream_switch conditional on the JoinDesired
macro.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
RP config change is a big hammer and use_rpt/spt needs to be
re-evaluated on all existing (S,G) entries.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
If a source is being forwarded along the RPT it uses the parent (*,G)'s
IIF. When the parent's IIF changes all the children need to be updated
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
mfcc_parent for an (S, G) entry was being updated on any upstream RPF
change. With the change to use RPT for (S,G) in some cases we can no
longer do that. Instead the upstream entry's RPF neigbor is managed
separately form the channel_oil's mfcc_parent i.e. via NHT. And the
mfcc_parent is evaluated at the time of mroute programming.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
An (S,G) mroute can be created as a result of rpt prune. However that
entry needs to stay on the parent (*,G)'s tree (IIF) till a decision is
made to switch the source to the SPT.
The decision to stay on the RPT is made based on the SPTbit setting
according to - RFC7761, Section 4.2 “Data Packet Forwarding Rules”
However those rules are hard to achieve when hw acceleration i.e.
control and data planes are separate. So instead of relying on data
we make the decision of using SPT if we have decided to join the SPT -
Use_RPT(S,G) {
if (Joined(S,G) == TRUE // we have decided to join the SPT
OR Directly_Connected(S) == TRUE // source is directly connected
OR I_am_RP(G) == TRUE) // RP
//use_spt
return FALSE;
//use_rpt
return TRUE;
}
To make that change some re-org was needed -
1. pim static mroutes and dynamic (upstream mroutes) top level APIs
have been separated. This is to limit the state machine to dynamic
mroutes.
2. c_oil->oil.mfcc_parent is re-evaluated based on if we decided
to use the SPT or stay on the RPT.
3. upstream mroute re-eval is done when any of the criteria involved
in Use_RPT changes.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Theoretically there should be no case where the channel-oil hangs
around after the upstream entry is removed. But currently there are
cases where it does. This is a precautionary fixup till we are
rid off all of those cases.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
These logs were printing file name which has little value (is always
pim_oil.c). Instead print the caller.
add_oif/del_oif are being called directly from one too many. Instead OIF
setup needs to be consolidated via the PIM state machine. These
debugs are expected to help in understanding what needs to be cleaned up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When you turn on `debug igmp trace` we are seeing a bunch
of debugs associated with pim processing. This is because we were
using PIM_DEBUG_TRACE which is both `debug igmp trace` and `debug pim trace`
when tracing igmp code it would be nice to only see igmp work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the code to create an upstream reference whenever the code
creates an channel_oil via the pim_mroute.c code. This code also
starts a keep alive timer to clean up the reference if we do
nothing with it after the normal time.
I've left alone the source->channel_oil creation because these
are kept and tracked independently already.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify code base so that pim_upstream *always* creates a channel_oil
and as such we do not need to create it later or play other games.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we create a channel_oil ensure that all paths that
we can go down will create one. Future commits
can remove the (up->channel_oil) tests.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We already log whether or not we add nht tracking, having
an additional boolean to say to log another line is
a bit over the top.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
become stale entries.
Topology:
--------
Source
|
FHR
|
RP ------ LHR --- Recv1
|
Recv2
Root case :
-----------
When RP acts as a LHR i.e RP has a local receiver and registed for
the same group where LHR connected receiver also registered for the
same multicast group.When RP receives a (s,g) join form LHR , it
increments upstream ref count to two to track the Local membership
as well.But at the time of KAT expiry in RP , upstream reference
is not being removed Which is added to track local membership which
is causing to make these entries as stale in RP and FHR.
Fix : Made the change such that it removes the upstream reference
if it is added to track the local memberships.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Always when creating a new S,G state look at all possible ifchannels
to decide what the mroute should be.
The bug that this is fixing is this:
Suppose two incoming `*,G` joins on swp1, and swp2.
Now suppose that one of those ifchannel `*,G` sends a `*,G S,G RPT Prune`.
We were creating the S,G upstream state as we should but we were
only looking at the S,G ifchannel to decide the S,G mroute we would
be creating. As such what we need to do is to look over the associated
*,G ifchannels and allow us to associate correct oil needed.
Ticket: CM-24732
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For multicast vxlan tunnels we register the local VTEP-IP independent
of the prescence of BUM traffic i.e. we prime the pump. This
is acheived via NULL registers.
VxLAN orig entries with upstream in a PIM_REG_JOIN state are linked to
a work list for periodic NULL register transmission. Once the SPT setup
is complete the upstream-entry moves to a PIM_REG_PRUNE state and is
remved from the VxLAN work list.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
pim_vxlan will use this for registering the local-VTEP-IP wth the RP
independent of the presence of BUM traffic.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In a VxLAN-AA setup both the anycast VTEPS can send VxLAN encapsulated
traffic. This is despite the fact that the it is not-DR on the IIF
associated with the originating mroute.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In the case of vxlan origination entries IIF is set to -
1. lo for single VTEPs
2. MLAG-ISL for VTEPs multihomed via MLAG.
This commit creates the necessary infrastructure by -
1. allowing the IIF to be set statically (without RPF lookup)
2. and by preventing next-hop-tracking registration
PS: Note that I have skipped additional checks in pim_upstream_del
intentionally i.e. an attempt will be made to remove nexthop-tracking
for the upstream entry (with STATIC_IIF) which will fail because of the
up-entry not being in the nh's hash table. Ideally we should maintain
a nh pointer in the up-entry to prevent this unnecessary processing.
In the abscence of that I wanted to avoid spraying STATIC_IIF checks
all over.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In the case of pim vxlan we create and keep upstream entries alive
in the abscence of traffic. So we need a mechanism to purge entries
abruptly on vxlan SG delete without having to wait for the entry
to age out.
These are again just the infrastructure changes needed for it.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
For vxlan BUM MDTs we prime the pump and register the local-VTEP-ip
as source even before the first BUM packet is rxed. This commit provides
the infrastructure changes needed for that.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The decision for Update_SPTbit(S,G, iif) includes a test
for JoinDesired(S,G) in section 4.2.2. When we were deciding
to update the spt bit we were not taking this into account.
This commit fixes this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On the LHR after we decide that traffic is flowing and
we set the SPT bit for the S,G *and* the incoming IIF
of the S,G is different than the incoming IIF of the *,G
we should immediately send the *,G S,G RPT Prune as
a triggered response instead of waiting for the next
cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are displaying S,G string data we already auto
display the string as (S,G) no need to have ((S,G)).
Cleanup some that were found during log look through.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When RP gets deleted, find all the (*, G) upstream whose group belongs to
the deleted RP, release the upstream from pnc->upstream_hash in the function
pim_delete_tracked_nexthop().
Signed-off-by: Sarita Patra <saritap@vmware.com>
When route to RP gets modified, FRR receives a notification from
zebra, and call the function pim_resolve_upstream_nh() to compute the
nexthop and update upstream->rpf structure.
Issue: In case when RP becomes not reachable, FRR only uninstall
the mroute from the kernal, but not update the upstream->rpf structure.
Fix: When FRR receives a notification from zebra saying RP becomes
not reachable, then update the following fields.
1. update channel_oil incoming interface as MAXVIFS
2. Un-install the mroute from the kernel.
3. Switch upstream state from JOINED to NOTJOINED.
4. Clear the nexthop information of the upstream.
Signed-off-by: Sarita Patra <saritap@vmware.com>
In this commit, we are creating a dummy upstream & dummy channel_oil
for (*, G) when RP is not configured or not reachable.
Dummy upstream: <upstream_addr = INADDR_ANY, rpf = Unknown>
Dummy channel oil: <iif = MAXVIFS>
Signed-off-by: Sarita Patra <saritap@vmware.com>
When FRR receives IGMP/PIM (*, G) join and RP is not configured or not
reachable, then we are creating a dummy upstream with incoming interface
as NULL and upstream address as INADDR_ANY.
Added upstream address and incoming interface validation where it is necessary,
before doing any operation on the upstream.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Create a `struct pim_router` and move the thread master into it.
Future commits will further move global varaibles into the pim_router
structure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit fixes two issues during pim shutdown.
1) The rp_info structure was being freed before the
outgoing notifications that depended on it's information
was sent out as part of shutdown.
2) The pim->upstream_list shutdown involved iterating
over the list via ALL_LIST_ELEMENTS. This typically
is enough but pim will auto delete child nodes as well
as itself when it goes away and they depend on it. As such
the node and nnode could possibly already have been freed.
So change the way we look at all the data in the upstream_list
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow at timer wheel creation time the ability to specify a
name for what we want the 'show thread cpu' to show up as.
Modify pim to note this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When pimd is getting terminated, pim_upstream_del() gets called as
part of cleaning process. pim_upstream_del() deletes the route and
assigns NULL to the up->channel_oil. It also deletes each if_channel
by calling the function pim_ifchannel_delete().
pim_ifchannel_delete() internally calls the caller function pim_upstream_del(),
if it is the last ifchannel for that upstream. So pim_upstream_del
is getting called twice, which will access the up->channel_oil which
was already set to NULL before. This results in crash.
Fix:
pim_ifchannel_delete() should call pim_upstream_del (caller function)
only if the up->ref_count > 0. Added an assert(up->ref_count > 0) in
the function pim_upstream_del().
Signed-off-by: Sarita Patra <saritap@vmware.com>
On shutdown and cleaning up pim_upstream ensure that the
upstream_sg_wheel still exists to remove item from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim_upstream_free command was leaving slag by
not deleting data associated with the upstream
data structure. Modify the code to explicitly free
all data associated with an upstream on a pim instance
deletion event. Additionally the end result is that
the pim_upstream_free command is not needed anymore
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The commit '19b807c pimd: Allow the keepalive time to be per vrf.'
is missing some data. Probably as a result of the indentation
and I accidently dropped it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a single S,G is being deleted because the keepalive
timer has timed out, Send a *,G join upstream to clear
the S,G RPT prune bit.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The channel_oil has a back pointer(up) to the upstream data structure.
If we are planning on keeping the channel oil (due to ref count issues)
longer than keeping the upstream, when we delete the upstream we were
not clearing the back pointer to up. This would result in a situation
where if that memory has started to be used again it will cause a
crash and other fun things.
Ticket: CM-17092
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The NHT upstream list at scale is horribly inefficient due to keeping
a sorted list of upstream entries. The attempting to find
the upstream and the insertion of it into the upstream_list
was consuming a large amount of cpu cycles.
Convert to a hash, allow add/deletions to effectively become
O(1) events.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a S,G,RPT prune as part of a *,G tree, install
the NULL oil S,G mroute. This will cause the traffic to stop
flowing for this particular S,G as we expect.
Ticket: CM-16978
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a SGRPT Prune we were switching the upstream
to JOINED and immediately sending a join. This was not
the right thing to do.
This was happening because we were making decisions about the
new ifchannel before it was fully formed.
Rework ifchannel startup to provide enough information to
the pim upstream data structure to make the right decisions
Ticket: CM-16425
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
