When show ip ospf border-routers json (without vrf)
specificed, it leads to crash if there no border-routers
information.
Fix:
Do not free json object if use_vrf flag (means vrf option
is not passed) is not set.
Ticket:#3229017
Issue:3229017
Testing Done:
with fix:
l1# show ip ospf border-routers json
{
}
l1# show ip ospf vrf default border-routers json
{
}
Signed-off-by: Chirag Shah <chirag@nvidia.com>
a) if show_function happened to be NULL we would leak json memory
b) json_lsa_type was being allocated but only used in the default case, leaking memory
c) json output would sometimes produce text output and that is incorrect
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
```
(ospf) max-metric router-lsa administrative
```
Currently this running config depends at least one `area` with *active*
`network`, otherwise it will not occur.
The check on this dependency is redundant and wrong, just remove it.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Description:
Added hidden clis that will allow you to reset the default timers
for LSA refresh and LSA maxage remove delay, these will help in testing
LSA refresh scenarios in upcoming OSPFv2 Flood reduction feature(rfc4136).
IETF Link : https://datatracker.ietf.org/doc/html/rfc4136
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
Description:
Per neighbor GR enabled information is missing from json
output in "show ip ospf gr helper details json" command.
Example config:
frr(config-router)# graceful-restart helper enable 2.2.2.2
frr(config-router)#
frr(config-router)# do show ip ospf graceful-restart helper detail
OSPF Router with ID (10.112.156.220)
Graceful restart helper support disabled.
Strict LSA check is enabled.
Helper supported for Planned and Unplanned Restarts.
Supported Graceful restart interval: 1800(in seconds).
Enable Router list:
2.2.2.2,
frr(config-router)# do show ip ospf graceful-restart helper detail json
{
"routerId":"10.112.156.220",
"helperSupport":"Disabled",
"strictLsaCheck":"Enabled",
"restartSupoort":"Planned and Unplanned Restarts",
"supportedGracePeriod":1800,
}
frr(config-router)#
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Let's just use THREAD_OFF consistently in the code base
instead of each daemon having a special macro that needs to
be looked at and remembered what it does.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
timerval data structure is being used without initialization.
Using these uninitialized parameters can lead unexpected results
so initializing before using it.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
"show ip ospf neighbour [nbrid] [json]" is expected to give brief output
of the specific neighbour. But it gives the detailed output without
the detail keyword.
"show ip ospf neighbour [nbrid] [deatil] [json]" command is failed to
fetch the ecpected o/p. Corrected it.
Ex o/p:
frr(config-if)# do show ip ospf neighbor
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
8.8.8.8 1 Full/DR 17m03s 31.192s 20.1.1.194 ens192:20.1.1.220 0 0 0
30.1.1.100 1 Full/DR 56.229s 32.000s 30.1.1.100 ens224:30.1.1.220 0 0 0
frr(config-if)#
frr(config-if)#
frr(config-if)# do show ip ospf neighbor 8.8.8.8
Neighbor 8.8.8.8, interface address 20.1.1.194
In the area 0.0.0.0 via interface ens192
Neighbor priority is 1, State is Full/DR, 6 state changes
Most recent state change statistics:
Progressive change 17m18s ago
DR is 20.1.1.194, BDR is 20.1.1.220
Options 2 *|-|-|-|-|-|E|-
Dead timer due in 35.833s
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Thread Inactivity Timer on
Thread Database Description Retransmision off
Thread Link State Request Retransmission on
Thread Link State Update Retransmission on
Graceful restart Helper info:
Graceful Restart HELPER Status : None
frr(config-if)# do show ip ospf neighbor 8.8.8.8 detail
No such interface.
frr(config-if)# do show ip ospf neighbor 8.8.8.8 detail json
{}
frr(config-if)#
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
At the moment it's inconsistent, and very annoying. Let's just fix this, and
add a deprecation period to remove them after that.
```
vr_ib# show ip ospf neighbor json
{
"neighbors":{
"192.10.120.2":[
{
"priority":1,
"state":"Full\/DROther",
"deadTimeMsecs":36543,
"address":"192.10.120.2",
"ifaceName":"VLINK0",
"retransmitCounter":0,
"requestCounter":0,
"dbSummaryCounter":0
},
```
```
vr_ib# show ip ospf neighbor detail json
{
"neighbors":{
"192.10.120.2":[
{
"ifaceAddress":"192.10.120.2",
"areaId":"0.0.0.0",
"ifaceName":"VLINK0",
"nbrPriority":1,
"nbrState":"Full",
"stateChangeCounter":5,
"lastPrgrsvChangeMsec":53367612,
"routerDesignatedId":"0.0.0.0",
"routerDesignatedBackupId":"0.0.0.0",
"optionsCounter":66,
"optionsList":"*|O|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":33126,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on",
"grHelperStatus":"None"
},
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
before:
```
r1# show ip ospf vrf blue
% OSPF instance not found
r1# show ip ospf vrf default
% OSPF instance not found
r1# show ip ospf
% OSPF instance not found
```
after:
```
r1# show ip ospf vrf blue
% OSPF is not enabled in vrf blue
r1# show ip ospf vrf default
% OSPF is not enabled in vrf default
r1# show ip ospf
% OSPF is not enabled in vrf default
```
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
if r1 has a route received from a neighbor with the default administrative
distance configured
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [110/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:41
if we change the administrative distance
r1(config)# router ospf
r1(config-router)# distance 50
this is not applied as there are no changes in the routing table
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [110/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:13
This commit will force the update of the routing table with the new configured distance
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [50/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:14
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Two minor fixes:
- remove redundant "(a.b.c.d/m)" in "prefix" description
- remove some annoying space in "summary-address" and "tag"
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Currently "range" command can only accept `cost` or `substitute`
individually, and `show running` will mix them.
So need make it accept mixed form with both of them, otherwise
configuration file in mixed form will fail to start.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
