These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Replace all `random()` calls with a function called `frr_weak_random()`
and make it clear that it is only supposed to be used for weak random
applications.
Use the annotation described by the Coverity Scan documentation to
ignore `random()` call warnings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
It is possible that a if_lookup_by_index can return NULL
ensure that we handle this appropriately.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Issue: no ip msdp mesh-group <word> source command
deleting the mesh group, which might be used by the member.
Solution: no ip msdp mesh-group <word> source command, deletes
the mesh-group source.
Add a new cli command "no ip msdp mesh-group <word>" to delete
the mesh group.
Signed-off-by: Sarita Patra <saritap@vmware.com>
JSON output for igmp group display is modified as follows for better python handling.
1. Under each interface make array of group as an object
2. Include source and group inside each group object
These improvements are required for the set of topotest cases which will be upstreamed shortly.
Signed-off-by: Saravanan K <saravanank@vmware.com>
This CLI will allow user to configure a igmp group limit which will generate
a watermark warning when reached.
Though watermark may not make sense without setting a limit, this
implementation shall serve as a base to implementing limit in future and helps
tracking a particular scale currently.
Testing:
=======
ip igmp watermark-warn <10-60000>
on reaching the configured number of group, pim will issue warning
2019/09/18 18:30:55 PIM: SCALE ALERT: igmp group count reached watermak limit: 210(vrf: default)
Also added group count and watermark limit configured on cli - show ip igmp groups [json]
<snip>
Sw3# sh ip igmp groups json
{
"Total Groups":221, <=====
"Watermark limit":210, <=========
"ens224":{
"name":"ens224",
"state":"up",
"address":"40.0.0.1",
"index":6,
"flagMulticast":true,
"flagBroadcast":true,
"lanDelayEnabled":true,
"groups":[
{
"source":"40.0.0.1",
"group":"225.1.1.122",
"timer":"00:03:56",
"sourcesCount":1,
"version":2,
"uptime":"00:00:24"
<\snip>
<snip>
Sw3(config)# do sh ip igmp group
Total IGMP groups: 221
Watermark warn limit(Set) : 210
Interface Address Group Mode Timer Srcs V Uptime
ens224 40.0.0.1 225.1.1.122 ---- 00:04:06 1 2 00:13:22
ens224 40.0.0.1 225.1.1.144 ---- 00:04:02 1 2 00:13:22
ens224 40.0.0.1 225.1.1.57 ---- 00:04:01 1 2 00:13:22
ens224 40.0.0.1 225.1.1.210 ---- 00:04:06 1 2 00:13:22
<\snip>
Signed-off-by: Saravanan K <saravanank@vmware.com>
Valid range for hashmasklen is 0-32 under IPv4; failure to validate this
results in a negative bitshift later
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
Line break at the end of the message is implicit for zlog_* and flog_*,
don't put it in the string. Mid-message line breaks are currently
unsupported. (LF is "end of message" in syslog.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem: This happened in once in a while during testing the scenario multiple
times. When regstop timer expire and at that point if rpf interface doesn't
exist, the register state for the upstream gets struck in reg-prune state indefinitely.
This will not recover even when rpf comes back and traffic resumed because
register state is struck on prune.
RCA: Reg suppression expiry is keeping reg state unchanged when iif is absent.
Fix: When iif is absent during reg suppression expiry, treat it as couldreg
becoming false and move it NO_INFO state.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Problem: output is cut short when prefix string all octets are 3 digit.
RCA: Buffer was allocated only to hold ip addr str.
Fix: Added 3 bytes more to hold prefix length and a /.
Modified buffer in 'show ip pim bsrp-info' and 'show ip pim bsm database'
Signed-off-by: Saravanan K <saravanank@vmware.com>
Zebra is currently sending messages on interface add/delete/update,
VRF add/delete, and interface address change - regardless of whether
its clients had requested them. This is problematic for lde and isis,
which only listens to label chunk messages, and only when it is
waiting for one (synchronous client). The effect is the that messages
accumulate on the lde synchronous message queue.
With this change:
- Zebra does not send unsolicited messages to synchronous clients.
- Synchronous clients send a ZEBRA_HELLO to zebra.
The ZEBRA_HELLO contains a new boolean field: sychronous.
- LDP and PIM have been updated to send a ZEBRA_HELLO for their
synchronous clients.
Signed-off-by: Karen Schoener <karen@voltanet.io>
This is as per RFC. This is identified when conformance suite catched join.
RCA:
Packets were processed without checking allowed dest IP for that packet.
Fix:
Added check for dest IP
Converted this check to a function
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: preferred bsr routine, compare address in network byte order
Fix: changed to host format before comparision.
Testing:
Verified between 1.1.2.7 and 10.2.1.1, 10.2.1.1 is chosen as bsr
Initially:
R11# sh ip pim bsr
PIMv2 Bootstrap information
Current preferred BSR address: 1.1.2.7
Priority Fragment-Tag State UpTime
0 2862 ACCEPT_PREFERRED 00:00:30
Last BSM seen: 00:00:30
After next bsr started:
R11# sh ip pim bsr
PIMv2 Bootstrap information
Current preferred BSR address: 10.2.1.1
Priority Fragment-Tag State UpTime
0 3578 ACCEPT_PREFERRED 00:00:01
Last BSM seen: 00:00:01
R11# sh ip pim bsr
PIMv2 Bootstrap information
Current preferred BSR address: 10.2.1.1
Priority Fragment-Tag State UpTime
0 3578 ACCEPT_PREFERRED 00:00:04
Last BSM seen: 00:00:04
Signed-off-by: Saravanan K <saravanank@vmware.com>
Problem:
When the ifchannel is in SGRpt prune, if we receive a join, we go into no info
state but mroute still present with none oil
Join Prune Expiry timer on the ifchannel was still running when
Prune pending expired. This causes ifchannel not to be deleted and hence mroute.
Fix:
Stop expiry timer when we move into NOINFO state and delete the ifchannel.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: Upstreams which are in register state other than noinfo, doesnt remove
register tunnel from oif after it becomes nonDR
Fix: scan upstreams with iif as the old dr and check if couldReg becomes false.
If couldreg becomes false from true, remove regiface and stop reg timer.
Do not disturb the entry. Later the entry shall be removed by kat expiry.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA:
Either JP timer is used to send join or join timer.
We are not removing the group from jp aggregate during suppression.
So even if join timer is restarted, jp aggregate expiry during suppression
is sending join for the group.
Fix:
Remove the group from jp aggregate on the neighbor during jp suppression.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: This was todo item in current code base
Fix: Hello sent with 0 hold time before we update the pim ifp primary address
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: starg join fell in to SGRpt join check and was treated as SGRpt join
so ifchannel state machine moved from prunepending to noinfo.
Fix: Check if it is starg join and process
Signed-off-by: Saravanan K <sarav511@vmware.com>
RCA:
Trying to get primary address for the interface.
Unnumbered interface pick address from vrf device for non default.
While doing so it ends up in recursion without exit condition if vrf dev doesnt have any address.
Solution:
Break the recursion by checking if it is vrf device.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA:
It has asserted because during neighbor delete on a interface,
pim_number_of_nonlandelay_neighbors count has become less less than 0.
This was due to not updating the count when hello option changed.
Fix:
During hello option update, check and increment or decrement when this option changes.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA:
1. Prune processing during join state was putting of join expiry timer
2. Join received during prune pending state was not comparing hold time with remaining expiry timer.
Fix:
Fixed as per RFC 4601/7761
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: We are ignoring (*,G) prune when the RP in packet is not RP(G)
Fix:
According to RFC 4601 Section 4.5.2:
Received Prune(*,G) messages are processed even if the RP in the message does not match RP(G).
We have allowed starg prune to be processed in the scenario.
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: Periodic join is mostly sent by nbr jp timer except for few scenarios by upstream join timer
Fix: If join timer not running, we have to use nbr jp timer to calculate
remaining time for next join.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Issue: Client1------LHR-----(int-1)RP(int-2)------client2
Client2 send IGMP join for group G.
Client1 send IGMP join for group G.
verify show ip mroute in RP, will have 2 OIL.
Client2 send IGMP leave.
Verify show ip mroute in RP, will still have 2.
Root cause: When RP receives IGMP join from client2, it creates
a (s,g) channel oil and add the interface int-2 into oil list and
set the flag PIM_OIF_FLAG_PROTO_IGMP to int-2
Client1 send IGMP join, LHR will send a (*,G) join to RP. RP will
add the interface int-1 into the oil list of (s,g) channel_oil and
will set the flag PIM_OIF_FLAG_PROTO_IGMP and PIM_OIF_FLAG_PROTO_PIM
to the int-1 and set PIM_OIF_FLAG_PROTO_PIM to int-2 as well. It is
happening because of the pim_upstream_inherited_olist_decide() and
forward_on() get all the oil and update the flag wrongly.
So now when client 2 sends IGMP prune, RP will not remove the int-2
from oil list since both PIM_OIF_FLAG_PROTO_PIM & PIM_OIF_FLAG_PROTO_IGMP
are set, it just unset the flag PIM_OIF_FLAG_PROTO_IGMP.
Fix: Introduced new flags in if_channel, PIM_IF_FLAG_MASK_PROTO_PIM
& PIM_IF_FLAG_MASK_PROTO_IGMP. If a if_channel is created because of
pim join or pim (s,g,rpt) prune received, then set the flag
PIM_IF_FLAG_MASK_PROTO_PIM. If a if_channel is created becuase of IGMP
join received, then set the flag PIM_IF_FLAG_MASK_PROTO_IGMP.
When an interface needs to be added into the oil list check if
PIM_IF_FLAG_MASK_PROTO_PIM or PIM_IF_FLAG_MASK_PROTO_IGMP is set, then
update oil flag accordingly.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Issue 1: "show ip pim interface traffic" not show prune TX/RX
Rootcause : not added the variable in the json
Fix : add prune TX/RX in show ip pim interface traffic json
Issue 2: "show ip pim rp-info" not shows the key iAmRp when it is false
Rootcause: Only display the key when the value is true.
Fix: add iAmRp as false in show ip pim rp-info json
Issue 3: "show ip pim rp-info" not showing outbound interface if it is empty
Rootcause: Only display when there is any OIL
Fix: When RP is not reachable then, the outbound interface is Unknown
The command "show ip pim rp-info json" not displaying the outbound
interafce if it is unknown
Signed-off-by: Sarita Patra <saritap@vmware.com>
S - Sparse Mode
C - indicates there is a member of the group directly connected to the router.
R -set on an (S, G) by the receipt of an (S, G) RP bit prune message.
F -This indicates that this router is a FHR and send register messages to RP to inform RP of this active source
P - OIL list is NULL. That means the router will send a prune.
T - At least one packet received via SPT.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Problem:
We are receiving PIM BSR packet over the pim interface which has no nbrs
According to RFC 5059 Sec 3.4
When a Bootstrap message is forwarded, it is forwarded out of every
multicast-capable interface that has PIM neighbors (including the one
over which the message was received).
RCA:
We are sending to all pim neighbors.
Fix:
We will avoid the interfaces which has no neighbors.
Verification: Manually verified that Pim router doesn't forward to intf with no nbrs
Signed-off-by: Saravanan K <saravanank@vmware.com>
RCA: When configured more than 32(MAXVIS), the inerfaces that are configured
after 32nd interfaces have the value of MAXVIF.
This is used as index to access the free vif tracker of array size 32(MAXVIFS).
So the channel oil list pointer which is present as the next field in pim structure get corrupt, when updating free vif.
This gets accessed during rpf update resulting in crash.
Fix: Refrain from allocating mcast interface structure and throw config error when more than MAXVIFS are attempted to configure.
Max vif checks are exempted for vrf device and pimreg as vrf device will be the first interface and not expected to fail and pimreg has reserved vif.
vxlan tunnel termination device creation has this check and throw warning on max vif.
All other creation are through CLI.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Problem: Route node is not de referenced after search when pim debug events are
not enabled when pim_rp_find_match_group is called. So this memory will not get
released when route node is deleted after hitting this path.
RCA: Dereferencing is done inside debug condition.
Fix: Moving outside debug condition
Signed-off-by: Saravanan K <saravanank@vmware.com>
Root cause: The header display is put in common outside the vtysh/json if-else.
Fix: Brought inside vtysh condition.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Issue: when (*,G) has some receiver and directly connected source sends traffic,
new (S,G) entry created is not inheriting the oil from (*,g)
RCA: pim_mroute_msg_nocache haven't assume FHR have (*,g) member ports
Fix : Added inherit oil from parent from (*,g) receivers to get added
Signed-off-by: Saravanan K <saravanank@vmware.com>
Issue: When any interface is getting added/deleted in the outgoing
interface list, it calls pim_mroute_add() which is updating the
mroute_creation time without checking if the mroute is already
installed in the kernel.
Fix: Check if mroute is already installed, then dont refresh the
mroute_creation timer.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Issue: show ip mroute displays the mroute uptime (time when
mroute installed into the kernel) per oif.
This is confusing.
Fix: Display mroute uptime per (s,g) mroute entry.
Signed-off-by: Sarita Patra <saritap@vmware.com>
There exists a chain of events where calling pim_mlag_up_peer_deref
can free the up pointer. Prevent a use after free by returning
the up pointer as needed and checking to make sure we are
ok.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
