When the ASBR stops announcing a prefix into the NSSA area, the LSA
type 7 is removed from the area. However the ABR is refreshing the
type 5 in its LSDB while removing the Type 7 LSA. Routers outside
the area do not get an update.
With the following topology: r1---r2---r3, with r3 being the ASBR
announcing type 7 LSA:
r3 configuration
router ospf
redistribute static
network 10.0.23.0/24 area 1
area 1 nssa
!
We stop announcing prefix 3.3.3.3 in the ASBR
r3# conf
r3(config)# router ospf
r3(config-router)# no redistribute static
r3(config-router)#
r2 (ABR)
r2# sh ip os database
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x8000002f 0x13be E2 3.3.3.3/32 [0x0] <-- flushed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 7 0x8000002f 0x73c7 E2 3.3.3.3/32 [0x0] <-- refreshed(?)
With PR#7086 the LSA type 5 is flushed from the LSDB in r2 and the change is
announced to routers outside the area (r1)
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <-- flushed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- flushed
r1# sh ip os da
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- flushed
Unfortunately I just realized that with PR#7086 I'm introducing a new bug, as Type-5 LSA
are not being refreshed when reaching MaxAge
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 35 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <--- refreshed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <--- not refreshed!
So this PR should fix the original issue and the bug introduced later, so when stopping
redistribution in the ASBR, both type 5 and type 7 are flushed:
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0]
Routers outside the area are also notified
r1# sh ip os da
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0]
Re-enabling redistribution, both LSA will be advertised again
r3# conf
r3(config)# router ospf
r3(config-router)# no redistribute static
r3(config-router)# redistribute static
r3(config-router)#
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 19 0x80000001 0x6f90 E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 11 0x80000001 0xcf99 E2 3.3.3.3/32 [0x0]
and they are refreshed when reaching MaxAge
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 10 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <-- Seq 2
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 2 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- Seq 2
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
In a topology like R1 -- R2 -- R5, with R2 being NSSA ABR and R5 being
ASBR redistributing external routes, the ABR R2 will translate type-7
LSA into type-5 and advertise to the backbone. In the current implementation
R2 is also advertising a type-4 LSA when there is no need.
RFC 3101: "...NSSA's border routers never originate Type-4 summary-LSAs
for the NSSA's AS boundary routers, since Type-7 AS-external-LSAs are
never flooded beyond the NSSA's border..."
With this PR a type-4 LSA will not be advertised
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
When the ASBR stops announcing a prefix into the NSSA area, the LSA
type 7 is removed from the area. However the ABR is refreshing the
type 5 in its LSDB while removing the Type 7 LSA. Routers outside
the area do not get an update.
With this change the LSA type 5 is flushed from the LSDB and the
change is announced to routers outside the area
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
If NSSA is enabled before redistribution is configured, Type-7 LSA's
are installed. But if NSSA is enabled after redistribution is
configured, Type-7 LSAs are missing.
With this change, when NSSA is enabled, scan for external LSA's and
if they exist, install Type-7.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Issue: # https://github.com/FRRouting/frr/issues/1836
Issue 1: if the router ospf current configuration is "area 0.0.0.2
range 1.0.0.0/24 cost 23" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise", the existing o/p is "area 0.0.0.2
range 1.0.0.0/24 cost 23 not-advertise". The keywords "not-advertise"
& "cost" are multually exclusive, so they should not come together.
The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise", the cost should be initialized
to OSPF_AREA_RANGE_COST_UNSPEC.
Issue 2: if the router ospf current configuration "area 0.0.0.2 range
1.0.0.0/24 substitute 2.0.0.0/24" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise" the existing o/p is "area 0.0.0.2 range
1.0.0.0/24 not-advertise substitute 2.0.0.0/24". The keywords
"not-advertise" & "substiture" are multually exclusive, so they should
not come together. The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise" is configured,
ospf_area_range_substitute_unset() should be get called.
Issue 3: if the router ospf6 current configuration is "area 0.0.0.2
range 2001::/64 cost 23" and user try to configure "area 0.0.0.2 range
2001::/64 advertise", the existing o/p is area 0.0.0.2 range 2001::/64.
The keyword "cost 23" disappears.
Fix: When ospf area range "advertise" is configured and the range is not
NULL, the cost should not be modified.
Signed-off-by: Sarita Patra <saritap@vmware.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Inform the .clang-format file about LSDB_LOOP and
put the proper indentation for this loop into the
code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If the user enters a decimal, display a decimal.
If the user enters a dotted quad, display a dotted quad.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* ospf_spf.h: use an enum for the reason, and have it as a new argument to
ospf_spf_calculate_schedule, no need for additional call, and let compiler
do the checking.
* ospf_spf.c: format changes - Quagga coding style places function names
at the start of a new line, for easy grepping for definition.
(ospf_spf_calculate_timer) Change the log format of SPF execution time to
avoid ginormous line, and make logging conditional, as is the norm.
(cherry picked from commit b6eef003e1a79471addea0b01853b08aed812cc8)
Conflicts:
ospfd/ospf_spf.c
During CR for nexthop upstream it was noticed that usage
of prefix2str was not consistent. This fixes this problem
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Compute and display SPF execution statistics
Detailed SPF statistics, all around time spent executing various pieces of SPF
such as the SPF algorithm itself, installing routes, pruning unreachable networks
etc.
Reason codes for firing up SPF are:
R - Router LSA, N - Network LSA, S - Summary LSA, ABR - ABR status change,
ASBR - ASBR Status Change, AS - ASBR Summary, M - MaxAge
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: JR Rivers <jrrivers@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This fix is for Type-4 LS updates handling at a ABR router where
ospf daemon is not distributing Type-4 LS updates with correct LS-Age
after learning about a ASBR router in a ospf network. Because of this
Type-5 LS updates are not learnt in ospf network.
Testing Scenario:
This can be re-produced by restarting the ospfd daemon on DUT
(mentioned in figure below)before the Hello time interval expires
for area 0.0.0.1.
____ _______ ____ _________
| | area: 0.0.0.1 | | area: 0.0.0.0 | | area: 0.0.0.2 | |
| R1 |---------------------|DUT/ABR|---------------------| R2 |------------------| R3/ASBR |
|____| x.x.x.0/24 |_______| y.y.y.0/64 |____| z.z.z.0/24 |_________|
In the above setup when ospfd is restarted (imp:before the Hello interval
at R1 expires) and DUT learns about ASBR router R3 (Type-4) in the
network from R2, but this ls-update is not propagates in area
0.0.0.1. So R1 never comes to know about the ASBR router in the
network, so all the type-5 LS updates coming from R3 are not learnt
by R1. Further if we again restart ospfd daemon it starts working fine.
With the fix given this issue can be resolved.
More Discussion on this is available at:
http://www.gossamer-threads.com/lists/quagga/dev/23892
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
ISSUE
When max-metric router-lsa administrative is invoked on an ABR created with...
area <area> range <addr/mask>
the summary LSAs are sent out with 65535 (max-metric) added to the normal cost.
When max-metric router-lsa administrative is invoked on an ABR created with...
area <area> range <addr/mask> cost <cost>
the summary LSAs are sent out with <cost> (the max-metric is ignored). This
second behavior effectively incapacitates the max-metric function.
PATCH
This patch evaluates the state of the router and if it's isolated as a stub
router (rfc3137) via `max-metric router-lsa`, we unconditionally uses the
value of 0xff0000 when advertising summary LSAs.
Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When a range (or sub-range) is deleted, the area is notified by propagating a
MAXAGE LSA. This LSA stays in the database for a while to both insure
propagation as well as in the off chance that it's useful in the near future.
Unfortunately, the ABR algorithm was treating these MAXAGE LSAs as unchanged and
not propagating them within the areas.
Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ISSUE
When an area range is created in which there the sub-area has routes that are
smaller than the range, an ABR creates a blackhole route to cover the range.
When the range is removed, the blackhole route is not removed.
--A----B----C---
B is an ABR with A in area 1 and C in area 0. If A advertises `10.2.0.0/30` and
`10.2.0.4/30` and B is configured with `area 0.0.0.1 range 10.2.0.0/29` a
blackhole is created on B (`blackhole 10.2.0.0/29 proto zebra`). When the
area/range is removed via the command line, the blackhole remains in existence
even though the "range" route is removed from area 0 and the individual routes
are propagated.
PATCH
The reason for this behavior is that, prior to this patch, the range is deleted
from the area's list, so when ospf_abr_manage_discard_routes() gets called,
there is nothing to clean up. The patch removes the discard route as part of
the processing of the command line (ospf_area_range_unset()).
Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* ospf_abr.c
* ospf_abr_nssa_am_elected(): feed "best" instead of "address of best"
into IPV4_ADDR_CMP(), because "best" is a pointer; also, mean s_addr
field of the structures to get better typed pointers
* (general) Get rid of the router and network LSA specific refresh timers
and make the general refresher do this instead. Get rid of the twiddling
of timers for router/network LSA that was spread across the code.
This lays the foundations for future, general LSA refresh improvements,
such as making sequence rollover work, and having generic LSA delays.
* ospfd.h: (struct ospf) Bye bye to the router-lsa update timer thread
pointer.
(struct ospf_area) and to the router-lsa refresh timer.
* ospf_interface.h: Remove the network_lsa_self timer thread pointer
* ospf_lsa.h: (struct ospf_lsa) oi field should always be there, for benefit
of type-2/network LSA processing.
(ospf_{router,network}_lsa_{update_timer,timer_add}) no timers for these
more
(ospf_{router,network}_lsa_update) more generic functions to indicate that some
router/network LSAs need updating
(ospf_router_lsa_update_area) update router lsa in a particular area alone.
(ospf_{summary,summary_asbr,network}_lsa_refresh) replaced by the general
ospf_lsa_refresh function.
(ospf_lsa_refresh) general LSA refresh function
* global: In struct ospf_path, change struct ospf_interface *oi to int
ifindex. It is unsafe to reference *oi as an ospf interface can be
deleted under your feet. Use a weak reference instead.
2006-06-26 Paul Jakma <paul.jakma@sun.com>
* ospf_abr.c: (general) NSSA translate-candidate ABRs need to
be ASBRs, or other routers may rightfully refuse to install
translated type-5s LSAs. reported by dendroot@gmail.com.
(ospf_abr_nssa_check_status) Detect change in translator
state when ABR, and inc/dec redistribute count as when we
leave/enter the disabled state - so that translate-enabled
ABR properly sets ASBR bit on non-NSSA areas.
Run the resulting function through indent to clean it up.
* ospf_lsa.c: (router_lsa_flags) For purposes of ASBR bit,
NSSA area is same as stub area.
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_abr.c: (ospf_area_range_cost_set) Shouldn't create a new
range, should just lookup to see if one exists, the new range
is just leaked. Fixes CID #46.
* ospf_abr.c: (ospf_abr_announce_network_to_area) check
returned LSA of ospf_summary_lsa_refresh and print warning if
it failed.
(ospf_abr_announce_network_to_area) similar
(ospf_abr_announce_rtr_to_area) similar
* ospf_lsa.c: (ospf_router_lsa_new) check LSA returned is valid.
(ospf_router_lsa_originate) similar
(ospf_router_lsa_refresh, ospf_network_lsa_new) similar
(ospf_summary_lsa_new) Check ID is valid.
(ospf_summary_lsa_originate) ditto, and check returned LSA from
previous function is !NULL.
(ospf_summary_lsa_refresh) check ospf_summary_lsa_new return
is !NULL.
(ospf_summary_asbr_lsa_new) ID valid check.
(ospf_summary_asbr_lsa_originate) similar.
* ospfd/ospf_vty.c: forece default route LSA to be re_issued whenever
cost is changed ( [no] ip ospf area XXX default-cost YYY)
Support ignore-mtu option
* ospfd/ospfd.h: define OSPF_MTU_IGNORE_DEFAULT
* ospfd/ospf_packet.c: support ignore-mtu option
* ospfd/ospf_interface.h: field added for skipping MTU check
* ospfd/ospf_interface.c: fix memory leak in ospf_crypt_key_delete()
Set mtu_ignore field to default value
* ospfd/ospf_abr.[ch]: export ospf_abr_announce_network_to_area()
* ospfd/ospf_ism.h: add MACRO to convert internal ISM status into SNMP
correct values
* ospfd/ospf_snmp.c: add sanity check on LSA type in lsdb_lookup_next()
convert OSPFIFSTATE internal status into SNMP values
* (general) extern and static qualifiers added.
unspecified arguments in definitions fixed, typically they should
be 'void'.
function casts added for callbacks.
Guards added to headers which lacked them.
Proper headers included rather than relying on incomplete
definitions.
gcc noreturn function attribute where appropriate.
* ospf_opaque.c: remove the private definition of ospf_lsa's
ospf_lsa_refresh_delay.
* ospf_lsa.h: export ospf_lsa_refresh_delay
* ospf_packet.c: (ospf_make_md5_digest) make *auth_key const,
correct thing to do - removes need for the casts later.
* ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's
home-brewed versions, shuts up several warnings.
* ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and
VTY_GET_IPV4_PREFIX moved to lib/vty.h.
* ospf_zebra.c: (ospf_distribute_list_update_timer) hacky
overloading of the THREAD_ARG pointer should at least use
uintptr_t.
* ospf_abr.c: (ospf_abr_announce_network_to_area) dont forget
to approve LSAs for the case where metric has changed, lsa gets
flushed otherwise. (backport candidate).
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
