Don't hide the LABELED_UNICAST safi when processing route
updates; map it where necessary (to use the UNICAST table
for instance).
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Move the "longer-prefixes" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "route-map" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "filter-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "prefix-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "community-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There's no need to have different calls to bgp_show() when the only
difference is one argument that corresponds to a "void *" parameter.
Code duplication should be reduced to a minimum to avoid bugs like
the one fixed in the previous commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Like done in the other places (when "all" isn't used), pass the
actual alias name to bgp_show() instead of a null pointer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Description:
Incorrect behavior during best path selection for the imported routes.
Imported routes are always treated as eBGP routes.
Change is intended for fixing the issues related to
bgp best path selection for leaked routes:
- FRR does ecmp for the imported routes,
even without any ecmp related config.
If the same prefix is imported from two different VRFs,
then we configure the route with ecmp even without
any ecmp related config.
- Locally imported routes are preferred over imported
eBGP routes.
If there is a local route and eBGP learned route
for the same prefix, if we import both the routes,
imported local route is selected as best path.
- Same route is imported from multiple tenant VRFs,
both imported routes point to the same VRF in nexthop.
- When the same route with same nexthop in two different VRFs
is imported from those two VRFs, route is not installed as ecmp,
even though we had ecmp config.
- During best path selection, while comparing the paths for imported routes,
we should correctly refer to the original route i.e. the ultimate path.
- When the same route is imported from multiple VRF,
use the correct VRF while installing in the FIB.
- When same route is imported from two different tenant VRFs,
while comparing bgp path info as part of bgp best path selection,
we should ideally also compare corresponding VRFs.
See-also: https://github.com/FRRouting/frr/files/7169555/FRR.and.Cisco.VRF-Lite.Behaviour.pdf
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
We should send only 16bytes next hop, no need for 32bytes, third party
next hops kinda for LLA does not work here.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When debugging issues for routes in multiple vrf's. It would
be extremely useful if the debug output had which vrf we
are acting on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
AFI/SAFI is handled in bgp_vty_find_and_parse_afi_safi_bgp() properly for
IPv4, but not for IPv6. Let's have it enabled for IPv6 by default.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
AFI/SAFI is handled in bgp_vty_find_and_parse_afi_safi_bgp() properly for
IPv4, but not for IPv6. Let's have it enabled for IPv6 by default.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:28 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65003
Communities : first 65001:2 65001:3
Large-Communities: 65001:1:1 65001:1:2 65001:1:3
Selection reason : First path received
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
`bgp` pointer always exists and is used before this function call.
Calling `free` in `json` in this context will also cause a
use-after-free crash.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
In some cases where bgp is at the mpls edge, where it has a BGP-LU
peer downstream but an IP peer upstream, it can advertise the
IMPLICIT_NULL label instead of a per-prefix label.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
The '... json detail' output is missing some data that's shown
via the 'route_vty_out_detail_header' function. Integrate the
json version of that function in the 'json detail' path.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
following command: show bgp l2vpn evpn rd all tags
does not append rd contexts one after the other
before:
dut-vm# show bgp l2vpn evpn rd all tags
Network Next Hop In tag/Out tag
Route Distinguisher: 65000:999
*> [5]:[0]:[24]:[10.40.1.0]
10.209.36.1 Route Distinguisher: 65000:1000
*> [5]:[0]:[24]:[10.40.1.0]
10.209.36.1
Displayed 2 out of 2 total prefixes
after:
dut-vm# show bgp l2vpn evpn rd all tags
Network Next Hop In tag/Out tag
Route Distinguisher: 65000:999
*> [5]:[0]:[24]:[10.40.1.0]
10.209.36.1
Route Distinguisher: 65000:1000
*> [5]:[0]:[24]:[10.40.1.0]
10.209.36.1
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There are places where we use route-maps using duplicated attributes and
neither intern nor flush them after the usage. If a route-map has set
rules for aspath/communities, they will be allocated and never freed.
We should always flush unneeded duplicated attributes.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
EVPN paths are maintained in per-ES list for efficient updates
(es→macip_global_path_list, es→macip_evi_path_list). VNI is also maintained
in path_extra for easy lookups. This (path_extra) VNI (which is always 0 for
global paths) was being displayed against the path and was mis-interpreted
as the BD.
To avoid that confusion I have removed the display.
Ticket: #2732605
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
if advertisement with SID structure Sub-Sub-TLV, we need to transpose
SID, so added transpose operation into bgp_update.
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
This is to avoid breaking changes between existing deployments of
extended community for bandwidth encoding. By default FRR uses uint32
to encode bandwidth, which is not as the draft requires (IEEE floating-point).
This switch enables the required encoding per-peer.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
