The ctx->zd_is_update is being set in various
spots based upon the same value that we are
passing into dplane_ctx_ns_init. Let's just
consolidate all this into the dplane_ctx_ns_init
so that the zd_is_udpate value is set at the
same time that we increment the sequence numbers
to use.
As a note for future me's reading this. The sequence
number choosen for the seq number passed to the
kernel is that each context gets a copy of the
appropriate nlsock to use. Since it's a copy
at a point in time, we know we have a unique sequence
number value.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit e3ee55d4bd)
When nl_batch_read_resp gets a full on failure -1 or an implicit
ack 0 from the kernel for a batch of code. Let's immediately
mark all of those in the batch pass/fail as needed. Instead
of having them marked else where.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 00249e255e)
When adding a nhg to a route map, make sure to specify the `family`
of the rm by looking at the contents of the nhg. Installation in the
kernel (for DSCP rules in particular) relies on this being specified in
the netlink message.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Signed-off-by: Stephen Worley <sworley@nvidia.com>
(cherry picked from commit 9a7ea213c0)
Skip marking routes as changed in ospf_if_down if there's now
new_table present, which might be the case when the instance is
being finished
The backtrace for the core was:
raise (sig=sig@entry=11) at ../sysdeps/unix/sysv/linux/raise.c:50
core_handler (signo=11, siginfo=0x7fffffffe170, context=<optimized out>) at lib/sigevent.c:262
<signal handler called>
route_top (table=0x0) at lib/table.c:401
ospf_if_down (oi=oi@entry=0x555555999090) at ospfd/ospf_interface.c:849
ospf_if_free (oi=0x555555999090) at ospfd/ospf_interface.c:339
ospf_finish_final (ospf=0x55555599c830) at ospfd/ospfd.c:749
ospf_deferred_shutdown_finish (ospf=0x55555599c830) at ospfd/ospfd.c:578
ospf_deferred_shutdown_check (ospf=<optimized out>) at ospfd/ospfd.c:627
ospf_finish (ospf=<optimized out>) at ospfd/ospfd.c:683
ospf_terminate () at ospfd/ospfd.c:653
sigint () at ospfd/ospf_main.c:109
quagga_sigevent_process () at lib/sigevent.c:130
thread_fetch (m=m@entry=0x5555556e45e0, fetch=fetch@entry=0x7fffffffe9b0) at lib/thread.c:1709
frr_run (master=0x5555556e45e0) at lib/libfrr.c:1174
main (argc=9, argv=0x7fffffffecb8) at ospfd/ospf_main.c:254
Signed-off-by: Tomi Salminen <tsalminen@forcepoint.com>
(cherry picked from commit d4e66f1485)
Current code treats all metaqueues as lists of route_node structures.
However, some queues contain other structures that need to be cleaned up
differently. Casting the elements of those queues to struct route_node
and dereferencing them leads to a crash. The crash may be seen when
executing bgp_multi_vrf_topo2.
Fix the code by using the proper list element types.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 0ef6eacc95)
Description:
Replacing memcmp at certain places,
to avoid the coverity issues caused by it.
Co-authored-by: Kantesh Mundargi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
FRR stores the route_tag in network byte order. Bug filed indicates
that the `show ip ospf route` command shows the correct value.
Every place route_tag is dumped in ospf_vty.c the ntohl function
is used first.
Fixes: #10450
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
EVPN route add should be queued to preserve the config order.
In particular, against deletion in rib_delete().
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Replace custom implementation or call to ipaddr_isset with a call to
ipaddr_is_zero.
ipaddr_isset is not fully correct, because it's fine to have some
non-zero bytes at the end of the struct in case of IPv4 and the function
doesn't allow that.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When setting maximum-prefix-out on peer-group, the applied value on
member is 0.
Fix usage of maximum-prefix-out on peer-group.
The peer_maximum_prefix_out_(un)set functions are derived from
peer_maximum_prefix_(un)set.
Fixes: fde246e835 ("bgpd: Add an option to limit outgoing prefixes")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Test the ability to use the following configure command with a Y value:
no neighbor X.X.X.X maximum-prefix-out Y
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Specifying a number is not possible with command no neighbor X.X.X.X
maximum-prefix-out
> frr(config-router-af)# no neighbor 192.168.1.2 maximum-prefix-out 1
> % Unknown command: no neighbor 192.168.1.2 maximum-prefix-out 1
This patch allows it.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
vrf_disable is always called first before
vrf_delete. The rnh_table and rnh_table_multicast tables
are already deleted as part of vrf_disable. No need
to do it again.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This PR will include if the area is NSSA in the output of "show ipv6 ospf"
r2# show ipv6 ospf
...
Area 0.0.0.0
Number of Area scoped LSAs is 8
Interface attached to this area: r2-eth1
SPF last executed 20.46717s ago
Area 0.0.0.1[Stub]
Number of Area scoped LSAs is 9
Interface attached to this area: r2-eth0
SPF last executed 20.46911s ago
Area 0.0.0.2[NSSA]
Number of Area scoped LSAs is 14
Interface attached to this area: r2-eth2
SPF last executed 20.46801s ago
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Introduces a topotest to validate proper AS-Path manipulation when using
"neighbor ... remove-private-AS".
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
In situations where remove-private-AS is configured for eBGP peers
residing in a private ASN, the peer's ASN was not being retained
in the AS-Path which can allow loops to occur. This was addressed
in a prior commit but it only addressed cases where the "replace-AS"
keyword was configured.
This commit ensures we retain the peer's ASN when using
"remove-private-AS" for eBGP peers in a private ASN regardless of other
keywords.
Setup:
=========
router bgp 4200000002
neighbor enp1s0 interface v6only remote-as external
neighbor enp6s0 interface v6only remote-as external
!
address-family ipv4 unicast
neighbor enp6s0 remove-private-AS
exit-address-family
ub18# show ip bgp sum | include 420000
BGP router identifier 100.64.0.111, local AS number 4200000002 vrf-id 0 <<<<< local asn 4200000002
ub20(enp1s0) 4 4200000001 22 22 0 0 0 00:00:57 1 1
ub20(enp6s0) 4 4200000001 21 22 0 0 0 00:00:57 0 1 <<<< peer asn 4200000001
ub18# show ip bgp | include 0.2
Default local pref 100, local AS 4200000002
*> 100.64.0.2/32 enp1s0 0 0 4200000001 4200000004 4200000005 4200000001 i
Before ("remote-private-AS" only):
=========
ub18# show ip bgp neighbors enp6s0 advertised-routes | include 100.64.0.2
*> 100.64.0.2/32 :: 0 i <<<<< empty as-path, no way to prevent loop
After ("remote-private-AS" only):
=========
ub18# show ip bgp neighbors enp6s0 advertised-routes | include 100.64.0.2
*> 100.64.0.2/32 :: 0 4200000001 4200000001 i <<<< retain peer's asn, breaks loop
Ticket: 2857047
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
