Config for -
1. Preventing fragmentation via user configured EAD RTs
2. Limiting the number of EVIs per-fragment if EAD fragmentation is needed
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
The EAD-per-ES route can be fragmented to fit the EVIs on the switch. This
command allows the EVI limit to be configured -
!
router bgp 5556
!
address-family l2vpn evpn
ead-es-frag evi-limit 200
exit-address-family
!
!
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
The EAD-per-ES route carries ECs for all the ES-EVI RTs. As the number of VNIs
increase all RTs do not fit into a standard BGP UPDATE (4K) so the route needs
to be fragmented.
Each fragment is associated with a separate RD and frag-id -
1. Local ES-per-EAD -
ES route table - {ES-frag-ID, ESI, ET=0xffffffff, VTEP-IP}
global route table - {RD-=ES-frag-RD, ESI, ET=0xffffffff}
2. Remote ES-per-EAD -
VNI route table - {ESI, ET=0xffffffff, VTEP-IP}
global route table - {RD-=ES-frag-RD, ESI, ET=0xffffffff}
Note: The fragment ID is abandoned in the per-VNI routing table. At this
point that is acceptable as we dont expect more than one-ES-per-EAD fragment
to be imported into the per-VNI routing table. But that may need to be
re-worked at a later point.
CLI changes (sample with 4 VNIs per-fragment for experimental pruposes) -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@torm-11:mgmt:~# vtysh -c "show bgp l2vpn evpn es 03:44:38:39:ff:ff:01:00:00:01"
ESI: 03:44:38:39:ff:ff:01:00:00:01
Type: LR
RD: 27.0.0.21:3
Originator-IP: 27.0.0.21
Local ES DF preference: 50000
VNI Count: 10
Remote VNI Count: 10
VRF Count: 3
MACIP EVI Path Count: 33
MACIP Global Path Count: 198
Inconsistent VNI VTEP Count: 0
Inconsistencies: -
Fragments: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
27.0.0.21:3 EVIs: 4
27.0.0.21:13 EVIs: 4
27.0.0.21:22 EVIs: 2
VTEPs:
27.0.0.22 flags: EA df_alg: preference df_pref: 32767
27.0.0.23 flags: EA df_alg: preference df_pref: 32767
root@torm-11:mgmt:~# vtysh -c "show bgp l2vpn evpn es-evi vni 1002 detail"
VNI: 1002 ESI: 03:44:38:39:ff:ff:01:00:00:01
Type: LR
ES fragment RD: 27.0.0.21:13 >>>>>>>>>>>>>>>>>>>>>>>>>
Inconsistencies: -
VTEPs: 27.0.0.22(EV),27.0.0.23(EV)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
PS: The number of EVIs per-fragment has been set to 128 and may need further
tuning.
Ticket: #2632967
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
This is an alternate to EAD route fragmenation and allows the user to limit
the route to a single UPDATE (<4K) independent of the number of EVIs.
Sample config (add one l2-vni RT from each VRF) -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
router bgp 5556
!
address-family l2vpn evpn
ead-es-route-target export 5556:1001
ead-es-route-target export 5556:1004
ead-es-route-target export 5556:1008
exit-address-family
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Sample route
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Network Next Hop Metric LocPrf Weight Path
*> [1]:[4294967295]:[03:44:38:39:ff:ff:01:00:00:01]:[32]:[27.0.0.21]
27.0.0.21 32768 i
ET:8 ESI-label-Rt:AA RT:5556:1001 RT:5556:1004 RT:5556:1008
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
When configured, the ead-es-route-target is used instead of
the auto-generated version that includes all associated EVI's RTs.
Ticket: #2632967
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Importing local es routes should be skipped. But the check of it is a bit wrong.
It is ok that local es routes can't be imported, but importing local es will
wrongly enter `uninstall` procedure.
Just adjust this check to make it clear. Immediately return in the case
of importing local es routes.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
1. Handle KeyError
2. logger object is defined in main function and its not not accessible
in other functions so defined it in local functions.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Problem:
ospf6d crash is observed when lsack is received from the neighbour for
AS External LSA.
RCA:
The crash is observed in ospf6_decrement_retrans_count while decrementing
retransmit counter for the LSA when lsack is recived. This is because in
ospf6_flood_interace when new LSA is being added to the neighbour's list
the incrementing is happening on the received LSA instead of the already
present LSA in scope DB which is already carrying counters.
when this new LSA replaces the old one, the already present counters are
not copied on the new LSA this creates counter mismatch which results in
a crash when lsack is recevied due to counter going to negative.
Fix:
The fix involves following changes.
1. In ospf6_flood_interace when LSA is being added to retrans list
check if there is alreday lsa in the scoped db and increment
the counter on that if present.
2. In ospf6_lsdb_add copy the retrans counter from old to new lsa
when its being replaced.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
Improving the test case to show database info as well
to help narrow down whether its a LSA origination problem or
route calculation problem in case of failures.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
The wheel data structure is a array of list pointers
but the alloc for it is using the sizeof (struct listnode *)
as the amount to allocate. Even though the (struct listnode *)
and (struct list *) sizes are the same, let's list the correct
values.
Signed-off-by: ron <lyq140hf2006@163.com>
Commit: 5d41413833 added 3 new dplane ops:
DPLANE_OP_INTF_INSTALL
DPLANE_OP_INTF_UPDATE
DPLANE_OP_INTF_DELETE
The build system does not build lua so zebra_script.c
was not updated. Update of course!
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
`bgp_evpn_import_route_in_vrfs()` is special ( l2vpn ) form of
`install_uninstall_evpn_route() with `AFI_L2VPN` and `SAFI_EVPN` family.
No caller, just remove it.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
before:
```
r1# show ip ospf vrf blue
% OSPF instance not found
r1# show ip ospf vrf default
% OSPF instance not found
r1# show ip ospf
% OSPF instance not found
```
after:
```
r1# show ip ospf vrf blue
% OSPF is not enabled in vrf blue
r1# show ip ospf vrf default
% OSPF is not enabled in vrf default
r1# show ip ospf
% OSPF is not enabled in vrf default
```
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Now we return all zeroed stats, which seems wrong. Handle the same way, as
with PIM interfaces. Return empty JSON and a warning for VTYSH.
```
exit1-debian-11# sh ip igmp statistics interface belekas
% No such interface
exit1-debian-11# sh ip igmp statistics interface belekas json
{
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
