When looking up the o_path->ls_prefix if it is not found
the debug statement was using a buf that was never initialized.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The ospfv3 spf reason strings are just presented internally in the code
without any real context. Give a tiny bit more useful information for
the developer and convert the integer to a uint32_t
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Issue #9535 describes how the export-list/import-list commands work
differently on ospfd and ospf6d.
In short:
* On ospfd, "area A.B.C.D export-list" filters which internal
routes an ABR exports to other areas. On ospf6d, instead, that
command filters which inter-area routes an ABR exports to the
configured area (which is quite counter-intuitive). In other words,
both commands do the same but in opposite directions.
* On ospfd, "area A.B.C.D import-list" filters which inter-area
routes an ABR imports into the configured area. On ospf6d, that
command filters which inter-area routes an interior router accepts.
* On both daemons, "area A.B.C.D filter-list prefix NAME <in|out>"
works exactly the same as import/export lists, but using prefix-lists
instead of ACLs.
The inconsistency on how those commands work is undesirable. This
PR proposes to adapt the ospf6d commands to behave like they do
in ospfd.
These changes are obviously backward incompatible and this PR doesn't
propose any mitigation strategy other than warning users about the
changes in the next release notes. Since these ospf6d commands are
undocumented and work in such a peculiar way, it's unlikely many
users will be affected (if any at all).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some CI VMs are using really old versions of json-c (pre 2013 [1])
that expect filenames to be passed as "char *" instead of "const char *".
Add some explicit casts to fix the resulting compiler errors on those
VMs (passing "char *" when the API expects "const char *" is fine).
Hopefully this commit should be reverted once the CI is updated to use
newer versions of json-c.
[1] https://github.com/json-c/json-c/commit/20e4708c
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 5187 specifies the Graceful Restart enhancement to the OSPFv3
routing protocol. This commit implements support for the GR
restarting mode.
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ipv6
ospf` EXEC-level command needs to be issued before restarting the
ospf6d daemon (there's no specific requirement on how the daemon
should be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospf6d is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add a knob to turn a NSSA area into a totally stub area. In this
configuration a Type-3 default summary route is generated by default.
Syntax: `area A.B.C.D nssa no-summary`.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
With this sequence of events:
eva# conf
eva(config)# router ospf6
eva(config-ospf6)# end
eva# show ipv6 ospf data adv-router 0.0.0.0 linkstate-id 0.0.0.0
OSPF6: Received signal 11 at 1630442431 (si_addr 0x0, PC 0x559dcfa3a656); aborting...
OSPF6: zlog_signal+0x18c 7fd2cc8229f7 7fff606775d0 /lib/libfrr.so.0 (mapped at 0x7fd2cc770000)
OSPF6: core_handler+0xe3 7fd2cc8616ad 7fff606776f0 /lib/libfrr.so.0 (mapped at 0x7fd2cc770000)
OSPF6: funlockfile+0x50 7fd2cc74f140 7fff60677840 /lib/x86_64-linux-gnu/libpthread.so.0 (mapped at 0x7fd2cc73b000)
OSPF6: ---- signal ----
OSPF6: ospf6_lsdb_type_show_wrapper+0x5d 559dcfa3a656 7fff60677dd0 /usr/lib/frr/ospf6d (mapped at 0x559dcf9a5000)
OSPF6: show_ipv6_ospf6_database_adv_router_linkstate_id+0x1f9 559dcfa3c24a 7fff60677e50 /usr/lib/frr/ospf6d (mapped at 0x559dcf9a5000)
OSPF6 crashes. Fix.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The message about ignoring a one-way hello should only be logged
when the router is acting a helper for another one.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add the "metric" and "metric-type" options to the "redistribute"
command.
This is a small commit since the logic of setting the metric
value and type of external routes was already present due to the
implementation of the "default-information originate" command months
ago. This commit merely extends the "redistribute" command to
leverage that functionality.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The prefix of routes to border routers consists of two pieces of
information embedded in a single struct (prefix.u.lp):
struct prefix {
uint8_t family;
uint16_t prefixlen;
union {
[snip]
struct {
struct in_addr id;
struct in_addr adv_router;
} lp;
} u __attribute__((aligned(8)));
};
As such, using prefix2str() (or the %pFX format specifier) isn't
correct when logging such routes.
This commit adds a few special cases here and there to handle
OSPF6_DEST_TYPE_ROUTER routes differently. It'd probably be a good
idea to add a helper function to handle all cases in a single place,
but that can be left for a second moment.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Also, update the ospf6_topo2 topotest since the expected output
was wrong. With this fix, NSSA routes will be created on r2
("redistribute connected"), and NSSA routes appear in the routing
table as regular external routes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once NSSA is unconfigured on an area, all self-originated Type-7
LSAs need to be flushed. The existing code was iterating over the
LSDB in the wrong way, causing ospf6_nssa_flush_area() to flush
LSAs of all types. Use the ALL_LSDB_TYPED_ADVRTR macro to perform
the intended iteration correctly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once NSSA is unconfigured, the OSPF area should still be operational
as a normal area instead of being deleted.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 3101 - Section 2.1 says:
"(..) Interfaces associated with an NSSA will not send or receive
Type-5 LSAs on that interface but may send and receive Type-7 LSAs.
Therefore, if the N-bit is set in the options field, the E-bit must
be clear."
If the E-bit isn't cleared on an NSSA ABR, that will cause hello
packets to be dropped (due to parameters mismatch), which will
prevent the ABR from forming adjacencies with others routers in
the NSSA area.
This problem didn't affect the existing NSSA topotest by chance
of luck. In that topotest, in the NSSA ABR, the NSSA area is
configured before any interface is associated to it. That caused
ospf6_check_and_set_router_abr() to return false, leading to
the unsetting of the E-bit. With this fix, the order in which
areas/interfaces are configured shouldn't matter because the E-bit
will always be unset on NSSA areas.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem Statement:
==================
Everytime redistribute CLI is executed, external LSAs are
re-originated. When there is no change in the CLI parameters
the LSAs should not get re-originated.
Fix:
=================
Check if the CLI params are same, do not re-originate the LSA.
Fixes: #9445
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
The lsa and lsanext must be unlocked if break out of ALL_LSDB loop.
Incidentally correct the comment of ALL_LSDB.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Description:
Changes to cover all the following GR helper exit scenarios.
1. Upon receiving max age grace lsa.( successful graceful restart)
2. Topo change
3. Grace timer expiry.
4. User changes( like config deletion , interface down)
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
1. changes to process GRACE LSA packet.
2. Validation changes to enter Helper role.
3. Helper functionality during graceful restart.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Fix:
When summarised Type-5 LSA is removed, the corresponding Type-7
LSAs also need to be removed from area.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Fix:
1. The assert at line ospf6_asbr.c:2849 is not required.
2. When Individual LSAs are present and summarisation is configured
we need to remove such LSAs and originate the summarised ones.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
For ECMP routes, the metric cost and metric type are compared
even when the asbr entry is not present. This stops the routes
from getting removed when max age LSAs are received for the
ECMP routes.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
RCA: When Type-7 LSA is updated, the LSDB is searched, if the
LSA is present in the LSDB then the LSA is updated with next
sequence number and if not then it is originated with the
INITIAL sequence number.
Here while originating Type-7 LSA Process Level LSDB is searched
for instead of area level LSDB.
Fix: Search in the area level LSDB and not in the process level.
Fixes#9099
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
* When the "cost" argument isn't present, the default cost should be
used instead of preserving the previously configured one (if any);
* When the "not-advertise" argument isn't present, the "not-advertise"
flag should be unset regardless if it was previously configured or
not.
Configuration commands should be deterministic and work in the same
way regardless of the current state.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
like the other automake variables, setting `xyz_LDFLAGS` causes
`AM_LDFLAGS` to be ignored for `xyz`. For some reason I had in my mind
that automake doesn't do this for LDFLAGS, but... it does. (Which is
consistent with `_CFLAGS` and co.)
So, all the libraries and modules have been ignoring `AM_LDFLAGS` (which
includes `SAN_FLAGS` too). Set up new `LIB_LDFLAGS` and
`MODULE_LDFLAGS` to handle all of this correctly (and move these bits to
a central location.)
Fixes: #9034
Fixes: 0c4285d77e ("build: properly split CFLAGS from AC_CFLAGS")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a requirement for avoiding sending traffic somewhere it was not
supposed to go: install summary route to local RIB to send traffic to
Null0.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
This feature is required for creating summary routes that drop traffic
without more specific routes.
Authored-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Feature Implementation.
========================
This feature will help in advertising the External LSAs with aggregation.
The commands allow us to tune the advertisement with different parameters
as mentioned in the CLI List below.
It can also help in case we do not want to advertise any prefix with the
no-advertise option.
New CLIs added:
===============
summary-address X:X::X:X/M$prefix [tag (1-4294967295)] [{metric (0-16777215) | metric-type (1-2)}]
no summary-address X:X::X:X/M$prefix [tag (1-4294967295)] [{metric (0-16777215) | metric-type (1-2)}]
summary-address X:X::X:X/M$prefix no-advertise
no summary-address X:X::X:X/M$prefix no-advertise
aggregation timer (5-1800)
no aggregation timer (5-1800)
show ipv6 ospf6 summary-address [detail$detail] [json]
debug ospf6 lsa aggregation
CAT RUN:
========
QE to add test scripts
Signed-Off-by: Mobashshera Rasool <mrassol@vmware.com>
In RFC 2328 OSPF Version 2, Section 12.4.3.1 "Originating summary-LSAs
into stub areas" mentions that the stub areas should not import external
routes and instead should generate a 'default summary-LSA' set to
default destination.
> In a stub area, instead of importing external routes
> each area border router originates a "default summary-
> LSA" into the area. The Link State ID for the default
> summary-LSA is set to DefaultDestination, and the metric
> set to the (per-area) configurable parameter
> StubDefaultCost. Note that StubDefaultCost need not be
> configured identically in all of the stub area's area
> border routers.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The route linked list in ospf6d is ordered in prefix batches which
are associated with a the route node denoting the prefix. So if
you look up the prefix in the tree and start walking the list, if you
find a prefix which differs from the one you are interested in then
you have gone beyond the batch of routes for that prefix.
In some cases the route database linked list is used on a per-prefix
basis. The existing code simply does a continue when the prefix does
not match and continues to walk. This works with small numbers of
routes because the walk continues through unrelated prefix batches and
never finds anything to operate on. However if we have many thousands
of routes these walks become expensive and can cause the SPF thread
(amongst others) to run very long, causing issues with adjacencies
where the dead timer is short.
Add a break to these prefix-based loops to exit early if we get a
prefix mismatch to avoid continuing down the route list if we have
overshot.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
The OSPF6_INTERFACE_LOOPBACK interface state wasn't entered anywhere,
even if the interface was OSPF6_IFTYPE_LOOPBACK. Fix.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When ospf6d comes up, it gets interface and address state before it
decides on its router ID. This results in a bunch of LSAs with
advertising router ID 0.0.0.0 in the LSDB. Not quite right.
There's a whole bunch of paths leading to this, so just drop the LSA in
ospf6_lsa_originate. The router-ID change causes everything to be
readvertised anyway (... but the delete doesn't catch the 0.0.0.0 stuff
because the router-ID is now different.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Prefix options are per-prefix, not per-path. As evident by the fact
that the field is never used on ECMP paths. Move it where it belongs.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Somehow the hello message debugging code slipped outside the debug
guard. Lets just remove it.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
There's a delay in FreeBSD between issuing a command to leave a
multicast group and an actual leave. If we execute "no router ospf6" and
"router ospf6" fast enough, we can end up in a situation when OS
performs the leave later than it performs the join and the interface
remains without a multicast group.
Instead of counting on a one second delay, we must wait until the
interface actually leaves the group.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Move code to its own function and remove most of the code indentation
(e.g. test for failure and quit as soon as possible).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Move `is_default_prefix` variations to `lib/prefix.h` and make the code
use the library version instead of implementing it again.
NOTE
----
The function was split into per family versions to cover all types.
Using `union prefixconstptr` is not possible due to static analyzer
warnings which cause CI to fail.
The specific cases that would cause this failure were:
- Caller used `struct prefix_ipv4` and called the generic function.
- `is_default_prefix` with signature using `const struct prefix *` or
`union prefixconstptr`.
The compiler would complain about reading bytes outside of the memory
bounds even though it did not take into account the `prefix->family`
part.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This code has been wrong ~ever (according to git history). There are 3
conditional blocks with the added assertion that both the LSA and the
vertex being checked can't both be network LSAs.
The third block is clearly assuming both LSA and vertex are router
LSAs b/c it is accessing the backlink and lsdesc as router lsdesc's also
making sure both are p2p links (which they would have to be to point at
each other).
The programming error here is that (A && B) == False does NOT imply !A,
but the code is written that way.
So we end up in the third block one of LSA or vertex being network LSAs
rather easily (whenever that is the case and the desc isn't the backlink
being sought).
This was caught by ASAN b/c the lsdesc and backlinks are being accessed
(> 4 byte field offsets) as if they were router lsdesc's in the third
block, when in fact one of them is a network lsdesc which is only 4
bytes long -- so ASAN flags the access beyond bounds.
Signed-off-by: Christian Hopps <chopps@labn.net>
Issue: Crash observed when LSAs are removed from LSDB after max age
when there is no area configured.
(gdb) bt
0 raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
1 0x00007fdb190548bc in core_handler (signo=6, siginfo=0x7ffdd2f5a470, context=<optimized out>) at lib/sigevent.c:262
2 <signal handler called>
3 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
4 0x00007fdb185ad921 in __GI_abort () at abort.c:79
5 0x00007fdb1907f199 in _zlog_assert_failed (xref=xref@entry=0x55f30902aa20 <_xref.21999>, extra=extra@entry=0x0) at lib/zlog.c:581
6 0x000055f308dc4f78 in ospf6_asbr_lsa_remove (lsa=0x55f30a7546d0, asbr_entry=0x0) at ospf6d/ospf6_asbr.c:696
7 0x000055f308dd8f0d in ospf6_lsdb_remove (lsa=0x55f30a7546d0, lsdb=lsdb@entry=0x55f30a73d300) at ospf6d/ospf6_lsdb.c:166
8 0x000055f308dd9701 in ospf6_lsdb_maxage_remover (lsdb=0x55f30a73d300) at ospf6d/ospf6_lsdb.c:376
9 0x000055f308dee724 in ospf6_maxage_remover (thread=<optimized out>) at ospf6d/ospf6_top.c:603
10 0x00007fdb1906520d in thread_call (thread=thread@entry=0x7ffdd2f5ae90) at lib/thread.c:1919
11 0x00007fdb19023e48 in frr_run (master=0x55f30a569b70) at lib/libfrr.c:1155
12 0x000055f308dc09b6 in main (argc=6, argv=0x7ffdd2f5b198, envp=<optimized out>) at ospf6d/ospf6_main.c:235
(gdb)
Steps to reproduce the issue:
1. router ospf6
2. redistribute static
3. ipv6 route 1::1/128 Null0
4. no redistribute static
5. wait for Max aged LSA to flush
6. Check DB, crash occurs.
RCA:
Crash occurred while accessing listgetdata(listhead(ospf6->area_list))
When there is no area attached to any of the interface listhead(ospf6->area_list)
is NULL. Therefore it crashed due to NULL access.
Fix:
Check before accessing null pointer.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Harmonize the code of functions ospf6_asbr_redistribute_disable and
ospf6_asbr_redistribute_reset.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The ospf6 router-id is provided by order of preference by:
ospf6d itself if the "ospf6 router-id X.X.X.X" command is set.
- zebra. If the "ip router-id X.X.X.X" zebra command is set, the
configured IP is provided as the ID or alternatively the highest
loopback IPv4 address or else the highest interface IPv4 address.
The running ospf6 router-id is stored in ospf6->router-id.
ospf6->router-id can change in the following conditions:
- A configuration change provides a new router-id value according to
the above rules. ospf6->router-id is updated to the new value if
there is no adjacency in FULL state. Otherwise, the ospf6d process
must be restarted to take the new router-id into account.
- On startup of both zebra and ospf6d, if ospf6d has not yet received a
valid router-id, ospf6d->router-id is set to 0 (i.e. 0.0.0.0). Then,
zebra notifies ospf6d that the router-id is available.
At ospf6->router-id, the current behavior of ospf6d is the following:
- The self generated LSAs that refer to the previous router-id as the
advertising router are kept.
- Self generated LSAs are created with router-id value.
- LSAs from the redistribution that refer to the previous router-id are
kept and no new redistribution LSAs are created.
As a consequence, the routers in the ospf6 areas will get incorrect
LSAs and might not be able to install prefixes of those LSAs into their
RIB.
This fix solves this issue by resetting the areas and the redistribution
when ospf6->router-id updated.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
ospf6_router_id_update function is used by ospf6_router_id_update_zebra
to update the running the ospf6 router-id.
This patches makes the functions to (un)configure ospf6 router-id use
the same function as ospf6_router_id_update_zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
---
When a router-id change is notified by zebra to ospf6d, we only take
into account the change if no adjacencies are in Full state.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Problem Statement:
==================
when route-map config is changed from permit to deny, it is not getting
applied to both connected and static and vice versa
RCA:
==================
When route-map changes from permit to deny or vice versa, a notification is
sent to ospf6 daemon via ospf6_asbr_routemap_update. In this function, a thread
is scheduled after 5 seconds to apply the route-map changes. In this thread
(ospf6_asbr_routemap_update_timer), only the first type is passed as argument
and only the first type i.e "connected" is passed and hence in callback only
on this type of route route-map gets applied.
Fix:
====
Need to loop through all the route-types in the call back and process
the route-map changes. Added a flag to mark which all route-types needs
to be processed.
Test Executed:
===============
1. Change route-map from permit to deny.
2. Change route-map from deny to permit.
3. Add new route and checked.
4. Verified summarised routes.
Risk:
============
Low
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Adding the "clear ipv6 ospf6 command" . It resets
the ospfv3 datastructures and clears the database
as well as route tables. It resets the neighborship
by restarting the interface state machine.
If the user wants to change the router-id, this
command updates the router-id to the latest static
router-id and starts the neighbor formation with
the new router-id.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Some unprotected debugs need to have macro protection,
Split these into the existing covering macro section to remove
a check per-packet from the main path.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Coverity flagged the possibility of an overflow in the latency
calculation, ensure that 64 bit integers are used in the
calculation to avoid this error.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
When OSPFv3 router is configured in both default and non-default VRFs,
every packet destined to a non-default VRF is read twice. This makes it
impossible to establish neighborship because every DbDesc packet is
treated as duplicated and we end up infinitely exchanging DbDescs.
We should drop packets received in the default VRF if an interface we
received it on is bound to another VRF.
Same thing was done for OSPFv2 in 555691e.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem Statement:
==================
Max aged LSAs are not getting deleted from DB when there are multiple
neighbors in a LAN.
Root Cause Analysis:
====================
When the LSA is added to the neighbor's retransmit list, the LSA retrans count
is incremented but it is not checked if the LSA is already present in the
retransmit list leading to the count being incremented multiple times
untill the ack is not received and when the ack is received the count is
decremented once and hence the count never becomes 0 and
it remains in the DB forever.
Fix:
====================
Do not increment the retrans count multiple times if the LSA is already
present in the retransmit list of the neighbor. Also do not add the LSA
in the retransmit List if already present.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Problem Statement:
=================
When show ipv6 ospf6 neighbor is executed each neighbor gets
displayed twice.
frr# show ipv6 ospf6 neighbor
Neighbor ID Pri DeadTime State/IfState Duration I/F[State]
1.1.1.1 1 00:00:39 Full/DR 00:00:10 ens192[BDR]
1.1.1.1 1 00:00:39 Full/DR 00:00:10 ens192[BDR]
RCA:
====
Since ospf6_interface gets added twice to if_list we see multiple
display output.
Fix:
====
add ospf6_interface to if_list only when newly area gets attached
to the interface. If its already added no need to add it again.
Risk:
=====
Low
Tests Executed:
===============
Have tested the defect scenario.
frr# show ipv6 ospf6 neighbor
Neighbor ID Pri DeadTime State/IfState Duration I/F[State]
1.1.1.1 1 00:00:35 Full/DR 00:36:04 ens192[BDR]
frr#
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
ospf6_asbr_redistribute_unset must not be called if the redistribution
is not yet configured, because it decrements redistribution counter and
makes it negative in this case.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
During the database description exchange process, the slave
releases the last dbdesc packet after router_dead_interval.
This was not implemented in the code.
I have written the function ospf6_neighbor_last_dbdesc_release,
which releases the last dbdesc packet after router_dead_interval.
This change was required as per the conformance test 13.11:
In state Full reception of a Database Description packet from
the master after this interval (RouterDeadInterval) will
generate a SeqNumberMismatch neighbor event.
Associated Parameters
ICMPv6 Packet Listen Time
ICMPv6 Packet Tolerance Factor
ICMPv6 Packet Tolerance Time
OSPFV3 DUT Interface Transmit Delay
OSPF Reset Adjacencies Timeout
Test Actions
1.
2. 3.
ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0, with DUT as slave.
ANVL: Wait (for <RouterDeadInterval> seconds).
ANVL: Send <OSPF-DD> packet from neighbor Rtr-0-A to DIface-0 con- taining:
• •
I-bit field not set M-bit field not set
MS-bit field set
DD sequence number same as the one last sent by ANVL.
. ANVL: Listen (for upto 2 * <RxmtInterval> seconds) on DIface-0.
5. DUT: Trigger the event SeqNumberMismatch and set the neighbor state for neighbor Rtr-0-A to ExStart.
6. DUT: Send <OSPF-DD> packet.
7. ANVL: Verify that the received <OSPF-DD> packet contains:
• I-bit field set
• M-bit field set
• MS-bit field set.
Test Reference
• RFC 5340, s4.2.1.2 p19 Sending Database Description Packets
RFC 2328, s10.8 p104 Sending Database Description Packets.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
In RFC 2328 seqnumber 0x80000000 is reserved and not used. If an LSA
is received with seqnumber the LSA is now dropped and a debug error log
is printed.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
For redistribute commands if route map is set, then route takes it's metric
values from the route map. But in the case that routemap is set but the
metric for the route map is not, then the route metric is set to type-1.
Check if the metric is set for the routemap. If not then set it as per
redistributed default values (type 2)
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
The default values will be set at the time of ospf6_redist_add
similar to ospfv2. Hence the default values will change as well.
Default metric type = E2
Default metic value = 20
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
allow amount of work done by read and write threads in a single
invocation to be tuned to between 1 and 100 packets (default 20)
Signed-off-by: Pat Ruddy <pat@voltanet.io>
On transmit and receive calculate the time since the last hello was seen
and log a warning if it is late by more than the hello period.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
queue outgoing lsupdate messages to the interface tx FIFO and schedule
the ospf_write task to deal with them.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
enqueue outgoing dbdesc messages to the end of the tx FIFO and
schedule the ospf6_write task to deal with them.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add per interface fifo and per instance write list as a precursor
to implementing fairer sharing of the ospf6 oscket resources.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
To ensure we read all the datagrams availabe from a socket when the
read task is scheduled, make the read helper return and error or
continue enum and loop unitl an error is received.
This requires the read from the socket to be non blocking
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Take the contents of ospf6_receive and split the funtionality that
deals with a single packet receipt and place it in a separate helper
function.
This is the first step in a refactor process to allow the ospf6_read
task to read until failure.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
The logging in ospf6 is very verbose. If you turn on logging on a scaled
system you get too many logs. The problem is that there are some errors
that occur that are hidden behind the debug flags, and to see these errors
we currently need to turn on the debug logging. This change converts these
error logs to warnings and removes the debug flags.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Changed LSA checksum JSON output variable name from "checkSum" to
"checksum" to maintain consistency.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Some wires got crossed during a couple merges using/changing
this function.
Update it to its new name.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
The ospf6_is_router_abr is checking to see if ospfv3 is an abr router
and also setting values. Let's rename it too `ospf6_check_and_set_router_abr`
to more accurately reflect what it is doing.
Additionally fix coverity #1505176 where we were not checking the return
value of ospf6_is_router_abr like we did every other time. In this
case we don't care about the return value so indicate that we do not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There exists a code path where ospf6 could be NULL and passing
to a function where it would always be derefed is a bad idea.
Put some small code in place to prevent this and allow this to be debuged
if it happens in the future.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently the interface area is configured from the router node using
"interface IFNAME area ID" command. There are multiple problems with
this command:
- it is not in line with all other interface-related commands - other
parameters are configured from the interface node using "ipv6 ospf6"
prefix
- it is not in line with OSPFv2 - area is configured from the interface
node using "ip ospf area" command
- most importantly, it doesn't work correctly when the interface is in
a different VRF - instead of configuring the interface, it creates a
new fake interface and configuring it instead
To fix all the problems, this commit adds a new command to the interface
configuration node - "ipv6 ospf6 area ID". The purpose of the command is
completely the same, but it works correctly in a multi-VRF environment.
The old command is preserved for the backward compatibility, but the
warning is added that it is deprecated because it doesn't work correctly
with VRFs.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The %p printf format specifier does already print the pointer address
with a leading "0x" prefix (indicating a hexadecimal number). There's
no need to add that prefix manually.
While here, replace explicit function names in log messages by
__func__.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Patch provided by Soman K.S. with small alterations.
Signed-off-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The following is implemented.
1. Configuring area as NSSA.
2. Generating Type 7 LSA.
3. Conversion of Type 7 to Type 5 ( Default Behavior).
4. NSSA ABR selection.
Reviewed-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Co-authored-by: Kaushik <kaushiknath.null@gmail.com>
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Kaushik <kaushiknath.null@gmail.com>
Ensure that if allocated route is not added to a table then it is
deleted to avoid leaking memory.
Add a new memory type for route table so that ospf6 routes can be
distinguished in the show memory output in isolation.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
So far, "set tag" was 99% implemented in ospf6d, but registration of the
hook functions was missing, causing "set tag" actions in route maps to be
ignored in ospf6d.
This commit adds the missing hook registration.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Fix the following issues:
- if "send" is combined with "recv-hdr", only "send" is shown
- if "recv" is combined with "send-hdr", only "recv" is shown
- if both "send-hdr" and "recv-hdr" are enabled, "; header only" is shown
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The message is always shown in the config, because IS_OSPF6_DEBUG_MESSAGE
works incorrectly when negated because of missing outer brackets.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
OSPF6 instance may not exist when processing interface state change.
Do not execute processing steps that require an instance if an area is
not configured for an interface.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Don't `memcpy` a `struct prefix` the memory size varies depending on the
original intended type. In this case the original type was (casted away)
`struct prefix_ipv6` and we tried to copy `struct prefix` which is
bigger.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When the ospf6 instance in unknown VRF is deleted, the redistribution
config is not freed, because it is not registered in zebra. We should
always free the config regardless of zebra registration status.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If the default route redistribution is configured in OSPF6 router before
the VRF is created, then this is not currently registered in zebra after
the VRF creation.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The code had no limits on addresses configured on an interface running
ospf6d. The code would crash when more than 100 addresses were added.
This change limits the number of interface address to 100 if mtu is set
to the default value. If the mtu is set to a jumbo packet size or larger
we will support 200 interface addresses.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Fixes OSPFv3-26.13 ANVL RFC conformance bug #8576 by improving the bugfix
for #7030 from 4c63a76a. That commit changed handling of received old
non-MAXAGE LSAs with a MAXAGE counterpart in the LSDB from "add all LSAs to
LSDB and flood non-self-originated ones" to "add & flood only
non-self-originated LSAs and ignore self-originated LSAs". The new behaviour
is similar but adds sending a MAXAGE LS Update for received self-originated
LSAs to remove the old LSAs from the network, resulting in "add & flood
non-self-originated LSAs, don't add but send MAXAGE LS Update for
self-originated LSAs". The missing MAXAGE LS Update is what OSPFv3-26.13
ANVL complained about.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
When an "export-filter" or "filter-list out" was configured on an area the
filter was not applied to existing database. The user would either have
to restart the neighboring router in the other area or issue a "clear ipv6
ospf6 interface" to cause the neighbor router to resend it's LSAs. The
new filter would then be applied to these LSAs and permit or deny summary
LSAs from being added/removed from the database. The code now applies the
filters to the existing database without user needing to take any action
to clear ospfv3 adjacencies.
The second part of the problem was if a rule changed the updated filter was
not applied. The code has been modifed to now process the rule update and
reapply the filter.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
As per the ospfv3 conformance test 24.3
SETUP: Configure DIface-0 with priority set to <hprty>.
ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0.
DUT: Exchange all the <OSPF-DD> packets, during adjacency establish- ment.
ANVL: Verify that the received <OSPF-DD> packets contain: • one header of Link-LSA, originated by DUT.
ANVL: Send <OSPF-LSR> packet from neighbor Rtr-0-A to DIface-0 con- taining:
• One Request Tuple for Link-LSA originated by DUT.
ANVL: Listen (for upto 2 * <RxmtInterval> seconds) on DIface-0. DUT: Send <OSPF-LSU> packet.
ANVL: Verify that the received <OSPF-LSU> packet contains:
• •
one Link-LSA, originated by DUT, contains: Rtr Pri field set to <hprty>.
----------
When interface priority is changed Link LSAs should be tranmitted
with the priority set.
When the link priorty chanages, the drbdr algorithm is called, which
can change the state of the interface. But if the state does not
changes then LINK LSAs are not transmitted.
This PR fixes this issue. If the state is changed, then LINK LSAs
will anyways be tranmitted. But in case the state is not changed,
even in that case Link LSAs are tranmitted.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
This change allows the user to only log the message header and not
include all the LSAs in each packet. In a large setup printing out
all the LSAs in each packet can make the system very hard to debug.
When the user finds an issue with the adjacency not coming up or in a
specific packet type they can turn on a full dump of the message.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
The output of "show ipv6 ospf6 route json" was not in the same
format as "show ip ospf route json". Currently ipv6 and ipv4 route
tables as well as ospfv2 have prefix as the key, but the same
is not true for ospfv3.
The structure of the json objects needs to be changed.
Currently the structure present is
frr(config-ospf6)# do show ipv6 ospf6 route json
{
"routes":[
{
"destination":"66:ff::\/64",
"isBestRoute":true,
"destinationType":"N",
"pathType":"IA",
"duration":"00:00:06",
"nextHops":[
{
"nextHop":"::",
"interfaceName":"ens256"
}
]
}
]
}
It is changed to:
frr(config-ospf6)# do show ipv6 ospf6 route json
{
"routes":{
"12::2\/128":{
"isBestRoute":true,
"destinationType":"N",
"pathType":"IA",
"duration":"00:01:22",
"nextHops":[
{
"nextHop":"::",
"interfaceName":"ens192"
}
]
}
}
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
`config.h` has all the defines from autoconf, which may include things
that switch behavior of other included headers (e.g. _GNU_SOURCE
enabling prototypes for additional functions.)
So, the first include in any `.c` file must be either `config.h` (with
the appropriate guard) or `zebra.h` (which includes `config.h` first
thing.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
`CFLAGS` is a "user variable", not intended to be controlled by
configure itself. Let's put all the "important" stuff in AC_CFLAGS and
only leave debug/optimization controls in CFLAGS.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... by referencing all autogenerated headers relative to the root
directory. (90% of the changes here is `version.h`.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Issue: When maximum-path is configured in ospf6 view, the
function ospf6_restart_spf deletes the external table as well
which is not required since that stores the redistribute routes.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
When oi->area == NULL, it tries to print the
interface's area name, but no area is present.
Print the area name from the command argument instead.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
this command summarises the ospf6 instances along with the router-id and
the vrf_id associated.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
