the original isisd code did not distinguish between
authentication_failure and authentication_type_failure, so
additional code had to be added to differentiate between the two
and to return the raw_pdu as requested by the IETF YANG model.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Note that the original IETF YANG model also included
a requirement to throttle such notifications so that they would
not be sent more often than once every 5 seconds. I did not
implement any throttling mechanism yet, mostly because I am
not sure whether this limit should apply to the entire isis daemon,
to each area, to each neighbor etc.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
However it is not currently called anywhere, as I could not find a
place in the code where it felt appropriate.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Note that some of the validation checks that were previously
executed in the code have been moved to the YANG model.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
These are complex commands to retrofit, partly due to the number of
different callbacks they touch. Additionally, in FRR adding
an interface to an IS-IS area that does not exist also creates that
area. To make sure that this behavior is kept, while at the same
time keeping the northbound api consistent, we need to take extra
care to call the appropriate callbacks to update the YANG tree.
Note that many callbacks rely on the existence of the corresponding
IS-IS area; when these callbacks are joined together in a single
transaction, we need to ensure that the area creation is performed
first, or the config will fail. For this reason, the isis instance
create callback has been given a slightly lower priority than the
others.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Finding an LSP by its id is useful not only for the
`show isis database` command.
So move it out into its own function to make it reusable.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To allow easier debugging of LSP transmission scheduling, add a debug
mode where all tx-queue insertions/deletions are logged.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When there is a stream of events coming in, where IS-IS learns
about a lot of updates, IS-IS would regenerate its LSPs before
the updates have been processed completely.
This causes suboptimal convergence because the intermediate state
will be flooded. Only after the configured `lsp_gen_interval`, a
new update with the correct and final state will be generated.
Resolve this by holding off LSP generation while there are still
events coming in.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
lsp_l1_refresh and lsp_l2_refresh are identical apart from the
hardcoded IS-IS level they are referring to. So merge them and
pass the level as part of the argument.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Implement RFC 6232, optionally allowing to flood isisd's NET and
hostname in purges it originates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add a command `debug openfabric flooding` to allow verification of
correct operation of the OpenFabric flooding optimization algorithm.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric changes IS-IS's initial database synchronization. While
regular IS-IS will simultaneuously exchange LSPs with all neighboring
routers during startup, this is considered too much churn for a densely
connected fabric.
To mitigate this, OpenFabric prescribes that a router should only
bring up an adjacency with a single neighbor and perform a full
synchronization with that neighbor, before bringing up further
adjacencies.
This is implemented by having a field `initial_sync_state` in the
fabricd datastructure which tracks whether an initial sync is still
pending, currently in progress, or complete.
When an initial sync is pending, the state will transition to the
in-progress state when the first IIH is received.
During this state, all IIHs from other routers are ignored. Any
IIHs transmitted on any link other than the one to the router with
which we are performing the initial sync will always report the far
end as DOWN in their threeway handshake state, avoiding the formation of
additional adjacencies.
The state will be left if all the SRM and SSN flags on the
initial-sync circuit are cleared (meaning that initial sync has
completed). This is checked in `lsp_tick`. When this condition occurrs,
we progress to the initial-sync-complete state, allowing other
adjacencies to form.
The state can also be left if the initial synchronization is taking too
long to succeed, for whatever reason. In that case, we fall back to the
initial-sync-pending state and will reattempt initial synchronization
with a different neighbor.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Remove isis_vty.c and create three new files isis_vty_common.c,
isis_vty_fabricd.c and isis_vty_isisd.c which are built into both
daemons, only fabricd and only isisd, respectively.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Take the source-prefix sub-TLV into consideration when running SPF
and support creation/deletion of dst-src routes as result.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Have an array of spftrees instead of a separate spftree and an
spftree6 for which all the code gets duplicated.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
As isisd's route_tables are directly related to spf trees, move
the route tables into the spftree instead of maintaining them
alongside of the spftrees.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This method is intended to be only used for debugging as per the author
and profiling shows we are spending a lot of cycles on it. Remove it for
regular builds by guarding it with a define.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- SPF is now per level only (no more per family)
- t_spf and pending removed from struct spftree and moved to
spf_timer field in struct isis_area
- show isis summary output changed to accomodate the per level SPF
- isis_spf_schedule6 and isis_run_spf6_lx functions are removed,
isis_run_spf_lx now calls isis_run_spf for both INET and INET6
- lsp related functions now call isis_spf_schedule only
Wire up all neccessary isisd first-class objects to be able to use qobj
safe-pointers on them.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
These patches is an implementation of RFC5305 that enable the
support of Traffic Engineering in IS-IS
* isisd/Makefile.am: Add new files isis_te.c and isis_te.h
* isisd/isis_circuit.[c,h]: Add new mpls_te_circuit structure to isis_circuit
structure to handle new Traffic Engineering TLVs
* isisd/isis_lsp.c: Update LSP handler to mux/demux Traffic Engineering TLVs
* isisd/isis_main.c: Add initialisation of ISIS TE
* isisd/isis_pdu.c: Update function process_p2p_hello() to retrieve remote IP
address to populate Traffic Engineering TLV.
* isisd/isis_te.[c,]: Implementation of RFC5305
* isisd/isis_tlv.[c,h]: Update TLV definition and function to handle
Traffic Engineering ones
* isisd/isis_zebra.c: Add new function isis_zebra_link_params() to retrieve
the link parameters of interfaces from ZBus to populate the Traffic Engineering
TLVs
* isisd/isisd.[c,h]: Add Traffic Engineering support with new debug command
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Last isisd CLI cleanup for now. This also folds L1 & L2 configs into
common functions, reducing CLI function bloat by a bit.
(This patch contains changes authored by both Christian Franke and David
Lamparter.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Move out basic area configuration (metric type, overload and attachment
bits, dynamic hostname extension enable) into isis_vty.c.
[v2: moved stuff back here that accidentally was in the previous patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Create isis_vty.c and start moving off CLI functions into that. These
then call newly-added "nice" API wrappers.
Patch contains significant work authored by Christian Franke.
[v2: removed stuff that crept in from the next patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
isisd implements a holdoff interval and will refrain from regenerating
an lsp if the difference between the current time and its last refresh
is less than the holdoff interval. Instead, it will schedule a timer
to regenerate the lsp after the holdoff interval has passed.
This implementation has one disadvantage in the case where there is a
succession of calls to lsp_regenerate_schedule. In such a case, the
first call will trigger an immediate regeneration of the lsp, while the
other calls will only schedule the regeneration timer. This leads to
cases where it takes holdoff interval time for information to propagate,
just because the information was only available e.g. at the second call
of lsp_regenerate_schedule in such a succession of calls.
By not immediately regenerating an lsp if the last generation time
is sufficiently long ago, but instead scheduling the regeneration with a
very small delay, we allow all information from such a succession of
calls to be considered.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Set/reset attached-bit in LSP header:
This patch provides support for set/reset attached_bit in the LSP header.
In IS-IS networks, routing inter-area traffic from L1 areas is
accomplished by sending the traffic to the nearest L1/L2 router.
A L1/L2 router identifies itself by setting an attach-bit (ATT-bit) in its (LSP).
The ATT-bit in LSP can be changed using the set-attached-bit or
no-set-attached-bit commands (similar to ‘set-overload-bit’ and
'no set-overload-bit’) using telnet terminal in router configuration mode.
Steps:
enable
configure terminal
router isis <Routing area>
set-attached-bit
V2: Removed looping through area list as this well set the bit for all
areas in the list. This implementation now looks exactly like the
current overload bit implementation.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
ISIS_ROUTE_FLAG_ACTIVE flag before running SPF.
* isisd.[ch]: Separate route tables for different levels. SPF is done
separately, but in case of L1L2 area they have to be merged.
* isis_zebra.c: Set/unset ISIS_ROUTE_FLAG_ZEBRA_SYNC flag correctly in
case of adding/removing IPv4 routes.
* zebra_route.c: Rework route validating process. Merging L1 and L2
tables in case of L1L2 area.
In short - many changes to make SPF work more correctly, add/remove
to/from RIB also works now. It's still very far from perfect though.
only in generated topology LSPs.
* isisd.[ch]: Cleanup CLI commands related to topology generation and
added command to specify base fo dynamic hostname for topology LSPs.
* isis_lsp.c: Rewrite almost all code related to generation topology
LSPs (top_lsp_refresh(), generate_topology_lsps() and
build_topology_lsp_data() functions). Topology is connected to own
LSP now (lsp_build_nonpseudo). Commented out lsppdu_realloc
functions, it's not used any more hopefully.
Topology generation feature is actually useful now.
generator code.
* isisd/Makefile.am: Variables to handle conditonal compiling of
topology generator code.
* isisd/isis_lsp.c: lsppdu_realloc() is used by topology generator.
* isisd/isisd.c: Rename show_isis_topology_cmd to not conflict the one
in the isis_spf.c.
* isisd/isisd.h: Remove TOPOLOGY_GENERATE define, it will be defined in
toplevel config.h if topology generator is enabled.
* isisd/topology/Makefile.am: Handle the libtoolized Quagga libraries.
- add privs support
- use misc quagga's definitions
- make it compile"able"
- fix segfault cases related to hostname()
- add debug isis xxx command
This patch has been approved by Paul Jakma.
