When using bfd on a single level, one may access a null pointer
list. Prevent from using it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
when we receive an event from BFDD and we end up throwing it away,
make sure that we log (with debug guards) the reason for this, so
we can troubleshoot issues like the one addressed by the previous
commit.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
A wrong check was silently skipping the initialization of the bfd_session
struct in the adjacency if the router was not configured for IPv6. This
would cause BFD events to be ignored regardless of the configuration.
Also add a function to return the "name" of an adjacency and use it in a
couple of places, including the new log, instead of repeating the same
code in a bunch of places.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Valgrind reports:
469901-==469901==
469901-==469901== Conditional jump or move depends on uninitialised value(s)
469901:==469901== at 0x3A090D: bgp_bfd_dest_update (bgp_bfd.c:416)
469901-==469901== by 0x497469E: zclient_read (zclient.c:3701)
469901-==469901== by 0x4955AEC: thread_call (thread.c:1684)
469901-==469901== by 0x48FF64E: frr_run (libfrr.c:1126)
469901-==469901== by 0x213AB3: main (bgp_main.c:540)
469901-==469901== Uninitialised value was created by a stack allocation
469901:==469901== at 0x3A0725: bgp_bfd_dest_update (bgp_bfd.c:376)
469901-==469901==
469901-==469901== Conditional jump or move depends on uninitialised value(s)
469901:==469901== at 0x3A093C: bgp_bfd_dest_update (bgp_bfd.c:421)
469901-==469901== by 0x497469E: zclient_read (zclient.c:3701)
469901-==469901== by 0x4955AEC: thread_call (thread.c:1684)
469901-==469901== by 0x48FF64E: frr_run (libfrr.c:1126)
469901-==469901== by 0x213AB3: main (bgp_main.c:540)
469901-==469901== Uninitialised value was created by a stack allocation
469901:==469901== at 0x3A0725: bgp_bfd_dest_update (bgp_bfd.c:376)
On looking at bgp_bfd_dest_update the function call into bfd_get_peer_info
when it fails to lookup the ifindex ifp pointer just returns leaving
the dest and src prefix pointers pointing to whatever was passed in.
Let's do two things:
a) The src pointer was sometimes assumed to be passed in and sometimes not.
Forget that. Make it always be passed in
b) memset the src and dst pointers to be all zeros. Then when we look
at either of the pointers we are not making decisions based upon random
data in the pointers.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Unfortunately as the topotests show a fast recovery after failure
detection due to BFD is currently not possible because of the following
issue:
There are multiple scheduling mechanisms within isisd to prevent
overload situations. Regarding our problem these two are important:
* scheduler for regenerating ISIS Link State PDUs scheduler for managing
* consecutive SPF calculations
In fact both schedulers are coupled, the first one triggers the second
one, which again is triggered by isis_adj_state_change (which again is
triggered by a BFD 'down' message). The re-calculation of SPF paths
finally triggers updates in zebra for the RIB.
Both schedulers work as a throttle, e.g. they allow the regeneration of
Link State PDUs or a re-calculation for SPF paths only once within a
certain time interval which is configurable (and by default different!).
This means that a request can go through the first scheduler but might
still be 'stuck' at the second one for a while. Or a request can be
'stuck' at the first scheduler even though the second one is ready. This
also explains the 'random' behaviour one can observe testing since a
'fast' recovery is only possible if both schedulers are ready to process
this request.
Note that the solution in this commit is 'thread safe' in the sense that
both schedulers use the same thread master such that the introduced
flags are only used exactly one time (and one after another) for a
'fast' execution.
Further there are some irritating comments and logs which I partially
removed. They seems to be not valid anymore due to changes in thread
management (or they were never valid in the first place).
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
On some cases (protocol convergence down or daemon exit) we'll have the
interface pointer in the circuit as `NULL`, so don't attempt to access
it.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Since this command is modeled using YANG, it's already displayed
as part of the call to nb_cli_show_dnode_cmds(). Calling the
'isis_circuit_config_write' hook was only making that command
to be displayed twice.
The aforementioned hook is still necessary for fabricd, which wasn't
converted to the new northbound model yet.
Fixes#6281.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When we call isis_adj_state_change with ISIS_ADJ_DOWN
we free the pointer, but we were still using the pointer
after it was freed. Cleanup the api to prevent this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Scenarios where this code change is required:
1. BFD is un-configured from BGP at remote end.
Neighbour BFD sends ADMIN_DOWN state, but BFD on local side will send
DOWN to BGP, resulting in BGP session DOWN.
Removing BFD session administratively shouldn't bring DOWN BGP session
at local or remote.
2. BFD is un-configured from BGP or shutdown locally.
BFD will send state DOWN to BGP resulting in BGP session DOWN.
(This is akin to saying do not use BFD for BGP)
Removing BFD session administratively shouldn't bring DOWN BGP session at
local or remote.
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
Make isisd create BFD sessions over IPv6 when IS-IS is configured
for IPv6 operation only.
When IS-IS is enabled for both IPv4 and IPv6 on a given interface,
prefer creating a BFD session over IPv6 to avoid having two BFD
sessions protecting the same IS-IS adjacency.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
